Replacing the against-the-ratchet washer on SunTour Power shifters
04-29-24, 12:28 PM
#1
Senior Member
Thread Starter
Replacing the against-the-ratchet washer on SunTour Power shifters
I'm putting 50-year-old Suntour Power Ratchet downtube shifters on my wife's rando bike, and they needed cleaning after removing from their original home on a 1974 Nishiki.
I somehow lost one of the circular washers that sits recessed against the ratchet piece itself. I'll likely grab one from a spare shifter - hopefully Suntour ratchet barcons use the same washer size.
But I'm curious whether these can be found elsewhere.
The part is #9 in the exploded diagram:
I somehow lost one of the circular washers that sits recessed against the ratchet piece itself. I'll likely grab one from a spare shifter - hopefully Suntour ratchet barcons use the same washer size.
But I'm curious whether these can be found elsewhere.
The part is #9 in the exploded diagram:
__________________
"c" is not a unit that measures tire width
"c" is not a unit that measures tire width
Last edited by TallRider; 04-29-24 at 12:32 PM.
