Is this crankset good?
#1
Newbie
Thread Starter
Is this crankset good?
Hi, in what condition do you think this crankset is in?
Video:
https://www.veed.io/view/9a29a840-40...1a?panel=share
Is it good or too worn? If I wanted to replace it, do I necessarily have to find a vintage crankset, or are there also recent models compatible with vintage bikes?
it is a Nervar 42/52: https://velobase.com/ViewComponent.a...m=115&AbsPos=6
Video:
https://www.veed.io/view/9a29a840-40...1a?panel=share
Is it good or too worn? If I wanted to replace it, do I necessarily have to find a vintage crankset, or are there also recent models compatible with vintage bikes?
it is a Nervar 42/52: https://velobase.com/ViewComponent.a...m=115&AbsPos=6
#2
Francophile
Join Date: Nov 2015
Location: Seattle and Reims
Posts: 3,566
Bikes: Peugeot: AO-8 1973, PA-10 1971, PR-10 1973, Sante 1988; Masi Gran Criterium 1975, Stevenson Tourer 1980, Stevenson Criterium 1981, Schwinn Paramount 1972, Rodriguez 2006, Gitane Federal ~1975, Holdsworth Pro, Follis 172 ~1973, Bianchi '62
Liked 672 Times
in
330 Posts
Hi, in what condition do you think this crankset is in? . . .
Is it good or too worn? If I wanted to replace it, do I necessarily have to find a vintage crankset, or are there also recent models compatible with vintage bikes?
it is a Nervar 42/52: https://velobase.com/ViewComponent.a...m=115&AbsPos=6
Is it good or too worn? If I wanted to replace it, do I necessarily have to find a vintage crankset, or are there also recent models compatible with vintage bikes?
it is a Nervar 42/52: https://velobase.com/ViewComponent.a...m=115&AbsPos=6
__________________
Keeping Seattle’s bike shops in business since 1978
Keeping Seattle’s bike shops in business since 1978
#3
Senior Member
Join Date: Dec 2016
Location: Long Island, NY
Posts: 2,218
Bikes: Trek 800 x 2, Schwinn Heavy Duti, Schwinn Traveler, Schwinn Le Tour Luxe, Schwinn Continental, Cannondale M400 and Lambert, Schwinn Super Sport
Liked 1,111 Times
in
716 Posts
It looks ok to me. I'd ride it. Three arm aluminum cranks were not common. Your bike has a vintage look because of that. That is good, but these three arm cranks also don't have much of a following to make it worth money. If you want to start changing chainrings or making other modifications then something different is recommended.
Is this on a French bike?
Is this on a French bike?
Likes For Velo Mule:
#4
Francophile
Join Date: Nov 2015
Location: Seattle and Reims
Posts: 3,566
Bikes: Peugeot: AO-8 1973, PA-10 1971, PR-10 1973, Sante 1988; Masi Gran Criterium 1975, Stevenson Tourer 1980, Stevenson Criterium 1981, Schwinn Paramount 1972, Rodriguez 2006, Gitane Federal ~1975, Holdsworth Pro, Follis 172 ~1973, Bianchi '62
Liked 672 Times
in
330 Posts
Not in the US but in France they were much more common. They typically were used on second tier bikes. At the top were bikes using full 531, Vitus, or Columbus tube sets, and using Stronglight 93 cranks for racing or Spécialités TA Cyclotouriste cranks for touring. Next came bikes that used the good tubing only for the three main frame tubes; these were commonly equipped either with a three-arm crank or the Stronglight 49D crank. It was a very interesting separation of models.
__________________
Keeping Seattle’s bike shops in business since 1978
Keeping Seattle’s bike shops in business since 1978
Last edited by Aubergine; 04-09-24 at 02:32 PM. Reason: Typist is an idiot
Likes For Aubergine:
#6
Newbie
Thread Starter
I think it's Italian (I'm Italian), but I don't know what brand it is: there's no label/code on the frame. under the bottom bracket it says CINELLI MADE IN ITALY, but I don't think the frame is Cinelli either
#7
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,884
Bikes: roadsters, club bikes, fixed and classic
Liked 2,090 Times
in
1,275 Posts
If I had to guess, I'd say the small ring should be fine for casual riding for awhile and the large ring is better. Throw a lightly used chain on it and see how it works.
C'est français!
but you knew that...
C'est français!
but you knew that...
Likes For clubman:
#8
Senior Member
Join Date: Jun 2018
Location: The Urban Shores Of Michigami
Posts: 1,810
Bikes: ........................................ .....Holdsworth "Special"..... .......Falcon "Special".......... .........Miyata 912........... ........................................
Liked 696 Times
in
437 Posts
I would keep that crank on the bike. The teeth look okay.
If you need to replace the chain-rings in the future, there are plenty of three-hole 116 BCD steel chain-rings out there
If you need to replace the chain-rings in the future, there are plenty of three-hole 116 BCD steel chain-rings out there
Likes For branko_76:
#9
Senior Member
Join Date: May 2013
Location: Greenwood SC USA
Posts: 2,423
Bikes: 2002 Mercian Vincitore, 1982 Mercian Colorado, 1976 Puch Royal X, 1973 Raleigh Competition, 1971 Gitane Tour de France and others
Liked 2,304 Times
in
833 Posts
Stronglight, TA and Nervar all made 116mm bcd 3-arm cranks like this. The T.A. is the nicest of them and came on some nice bikes. The Nervar has the advantage in that the extractor/puller uses a standard 22.0 mm threaded section, rather than the proprietary 23.0 of T.A. and 23.35mm of Strongllghts.
#10
[QUOTE=glysolid;23209946]I think it's Italian (I'm Italian), but I don't know what brand it is: there's no label/code on the frame. under the bottom bracket it says CINELLI MADE IN ITALY, but I don't think the frame is Cinelli either
Cinelli on the bottom bracket only means it’s a Cinelli bottom bracket. They sold them to a lot of people. I have a US built frame with a Cinelli BB
Cinelli on the bottom bracket only means it’s a Cinelli bottom bracket. They sold them to a lot of people. I have a US built frame with a Cinelli BB
#11
Senior Member
I would use it . I like the 3 arm cranks . I have the Campagnolo version on my Raleigh Competition GS and it is worn like yours but works very well.
This is from a few years ago and the bike is still riding and shifting nicely with the same chain rings . I switched to a NR rear derailleur but left the chain rings. Joe
This is from a few years ago and the bike is still riding and shifting nicely with the same chain rings . I switched to a NR rear derailleur but left the chain rings. Joe