High-pitched metallic "ping" sound -- diagnosis?
#1
Chases Dogs for Sport
Thread Starter
High-pitched metallic "ping" sound -- diagnosis?
For the last few rides, I have noticed a random, high-pitched metallic "ping" sound coming from (I think) the front end of my bike. (2009 Specialized S-Works SL2 Roubaix w/ Ultegra 6700 groupset & Mavic Ksyrium SL wheels.) The sound is loud enough for me to hear from the saddle and it sounds a bit like balls in a bearing striking one another when the bearing has no lube in it. The sound isn't regular or cyclical (as if my wheel or crank is striking something). The pings come in irregular clusters and occasionally don't ping at all. The bike has about 2,000 miles on it.
I changed my front wheel out -- but the ping continues with either wheel.
I re-torqued my stem and bar attachment bolts. (They were already at spec.)
I checked my headset -- There's no slop and no binding.
Any ideas on where to look next?
I changed my front wheel out -- but the ping continues with either wheel.
I re-torqued my stem and bar attachment bolts. (They were already at spec.)
I checked my headset -- There's no slop and no binding.
Any ideas on where to look next?
#2
Senior Member
Join Date: Feb 2005
Location: Oklahoma
Posts: 9,438
Bikes: Trek 5500, Colnago C-50
Likes: 0
Liked 8 Times
in
7 Posts
A wheel "ping" is usually due to loose spokes. But since it's happening to two different wheels there seems to be a different reason, unless the spokes are loose on both wheels.
Is it possible that the end of the brake cable could be hitting the spokes? Or how about the computer sensor?
Is it possible that the end of the brake cable could be hitting the spokes? Or how about the computer sensor?
#3
Senior Member
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 39,642
Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter
Liked 3,480 Times
in
1,911 Posts
I'm with Al, look for something like the end of the front derailleur wire hitting the frame from time to time. That is unless you have some friends who might have put a bearing ball into your top tube.
__________________
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FB
Chain-L site
An ounce of diagnosis is worth a pound of cure.
Just because I'm tired of arguing, doesn't mean you're right.
“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN
WARNING, I'm from New York. Thin skinned people should maintain safe distance.
#4
Chases Dogs for Sport
Thread Starter
A wheel "ping" is usually due to loose spokes. But since it's happening to two different wheels there seems to be a different reason, unless the spokes are loose on both wheels.
Is it possible that the end of the brake cable could be hitting the spokes? Or how about the computer sensor?
Is it possible that the end of the brake cable could be hitting the spokes? Or how about the computer sensor?
Great checklist items, though. I hadn't thought of those.
#5
Chases Dogs for Sport
Thread Starter
The frame is carbon. The ol' ball-bearing-in-the-top-tube trick would most likely make a loud, continuous "clack" sound.
#8
Senior Member
Join Date: May 2008
Location: Toronto
Posts: 281
Bikes: Limongi custom road; GT Avalanche 1.0
Likes: 0
Liked 0 Times
in
0 Posts
Check your brifters maybe? Or do you have anything mounted in your bar ends like a mirror that might have a loose piece inside the bar?
#9
Senior Member
Join Date: Dec 2009
Location: Mountain View, CA
Posts: 1,257
Bikes: 2012 Scott CR1 Comp
Likes: 0
Liked 0 Times
in
0 Posts
The one time I had that type of noise, it was because the headset bearings were completely trashed, as in the ring that held them was broken in several places, and the balls were just rollin' around in there. It also explained the shuddering on descents. Replaced both rings and it went away. Very annoying to diagnose, and the shop couldn't even hear the noise when I brought it in. I finally just had them take the front end of the bike apart, where they discovered the trashed bearings.
#10
Chases Dogs for Sport
Thread Starter
#14
Senior Member
I realize that you think it's coming from the front of the bike but noises have a weird way of bouncing around. I would try a different rear wheel and see if the problem goes away. High-pitched metallic ping noises are the noises that wound-up spokes make as they relax and unwind. Prior to unwinding, they will be tight and likely still be quite tight after unwinding (they may only turn a fraction of a turn). Rear wheel spokes can ping from hitting a bump or pedaling torque both of which happen frequently on a ride.
#15
Senior member