Chinese/Taiwanese carbon frame DIY builders #2
#1
Senior Member
Thread Starter
Chinese/Taiwanese carbon frame DIY builders #2
Being that I have just started my 3rd summer IN A ROW rehabbing from ORIF surgery I would like to continue the discussion that was previously derailed (or TROLLED) by some negative individual in this https://www.bikeforums.net/road-cycli...l#post18902946 thread.
This is 2nd attempt to gather like minded individuals and to provide POSITIVE information regarding the use of Chinese/Taiwanese carbon frames to build quality AFFORDABLE bikes.
I would like to thanks all of our members that have taken to time to share their knowledge and experience for no other reason than to simply provide an alternative to the high end carbon frame and bike manufacturers that I for one will covet but will NEVER be able to afford.
So that being said...on with the discussion!
This is 2nd attempt to gather like minded individuals and to provide POSITIVE information regarding the use of Chinese/Taiwanese carbon frames to build quality AFFORDABLE bikes.
I would like to thanks all of our members that have taken to time to share their knowledge and experience for no other reason than to simply provide an alternative to the high end carbon frame and bike manufacturers that I for one will covet but will NEVER be able to afford.
So that being said...on with the discussion!
#2
Mr. Dopolina
Join Date: May 2007
Location: Taiwan
Posts: 10,217
Bikes: KUUPAS, Simpson VR
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 149 Post(s)
Liked 117 Times
in
41 Posts
First off, you will only be looking at Chinese made frames. To the best of my knowledge there are no Taiwanese carbon vendors doing consumer direct sales.
There are plenty of Chinese Trading Companies to choose from.
Good luck.
There are plenty of Chinese Trading Companies to choose from.
Good luck.
#3
Senior Member
Join Date: Oct 2015
Posts: 15,481
Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE
Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7649 Post(s)
Liked 3,465 Times
in
1,831 Posts
Sorry, I can't help with this thread. I can't ride while my shoulder heals, and I can build a bike while I am waiting for the various shippers to do their jobs.
I can't even look forward to freaking out the TSA officers when I go through the airport metal detector.
Did you ever check out the encyclopedic thread on Weightweenies.com? (https://weightweenies.starbike.com/fo...3717&start=675)
I can't even look forward to freaking out the TSA officers when I go through the airport metal detector.
Did you ever check out the encyclopedic thread on Weightweenies.com? (https://weightweenies.starbike.com/fo...3717&start=675)
Last edited by Maelochs; 07-12-16 at 09:34 PM.
#4
Senior Member
Join Date: Oct 2015
Posts: 15,481
Bikes: 2015 Workswell 066, 2017 Workswell 093, 2014 Dawes Sheila, 1983 Cannondale 500, 1984 Raleigh Olympian, 2007 Cannondale Rize 4, 2017 Fuji Sportif 1 LE
Mentioned: 144 Post(s)
Tagged: 0 Thread(s)
Quoted: 7649 Post(s)
Liked 3,465 Times
in
1,831 Posts
#5
Mr. Dopolina
Join Date: May 2007
Location: Taiwan
Posts: 10,217
Bikes: KUUPAS, Simpson VR
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 149 Post(s)
Liked 117 Times
in
41 Posts
I was more thinking of the various eBay, Alibaba and consumer direct salers that can be found on the interwebs. Those are Mainlanders.
#7
Senior Member
Thread Starter
Actually I'm referring to primarily Chinese carbon frames by companies like Workswell, Dengfu and Hongfu. I have seen on Alibaba a Taiwanese company called Shenzhen Huyi Technology Co., Ltd. but on the recommendation of rpenmanparker who has been a great deal of help for me personally, I will be dealing directly with Workswell for MY build. That being said I believe getting as much info as I can on all option available and then rule out the ones on the recommendation of the the folks with first hand knowledge and experience.
#8
Mr. Dopolina
Join Date: May 2007
Location: Taiwan
Posts: 10,217
Bikes: KUUPAS, Simpson VR
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 149 Post(s)
Liked 117 Times
in
41 Posts
Well hey Bob! thanks for chiming in.
Actually I'm referring to primarily Chinese carbon frames by companies like Workswell, Dengfu and Hongfu. I have seen on Alibaba a Taiwanese company called Shenzhen Huyi Technology Co., Ltd. but on the recommendation of rpenmanparker who has been a great deal of help for me personally, I will be dealing directly with Workswell for MY build. That being said I believe getting as much info as I can on all option available and then rule out the ones on the recommendation of the the folks with first hand knowledge and experience.
Actually I'm referring to primarily Chinese carbon frames by companies like Workswell, Dengfu and Hongfu. I have seen on Alibaba a Taiwanese company called Shenzhen Huyi Technology Co., Ltd. but on the recommendation of rpenmanparker who has been a great deal of help for me personally, I will be dealing directly with Workswell for MY build. That being said I believe getting as much info as I can on all option available and then rule out the ones on the recommendation of the the folks with first hand knowledge and experience.
Not that it matters. Just an FYI.
#9
Senior Member
Thread Starter
Sorry, I can't help with this thread. I can't ride while my shoulder heals, and I can build a bike while I am waiting for the various shippers to do their jobs.
I can't even look forward to freaking out the TSA officers when I go through the airport metal detector.
Did you ever check out the encyclopedic thread on Weightweenies.com? (Hongfu FM-066/Chinese open mould frame thread - Page 46 - Weight Weenies)
I can't even look forward to freaking out the TSA officers when I go through the airport metal detector.
Did you ever check out the encyclopedic thread on Weightweenies.com? (Hongfu FM-066/Chinese open mould frame thread - Page 46 - Weight Weenies)
Oh and can you provide a link to the Readers Digest condensed version of the Weightwennies thread?
#10
Senior Member
Join Date: Apr 2013
Location: SoCal
Posts: 6,496
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 276 Post(s)
Likes: 0
Liked 6 Times
in
3 Posts
Ah...Mr trouble-maker! Shoulder...r u kidding? Rub some dirt on it. OMG, my 13yr old niece in tougher than that. I may book a round trip flight up to NYC just to mess with the TSA officers (being that I have 3 plates in my leg.) That's not to mention a total of 23 screws.
Oh and can you provide a link to the Readers Digest condensed version of the Weightwennies thread?
Oh and can you provide a link to the Readers Digest condensed version of the Weightwennies thread?
#11
Senior Member
Thread Starter
Well...don't I feel like a geographical IDIOT! This https://www.alibaba.com/showroom/tai...ke-frames.html is the Alibaba link I was referring to. Not sure why they refer to the frames as Taiwan frames though.
TTYTT...I vaguely remember someone saying or something I read regarding CF frames being produced in Taiwan. Not sure it was regarding the molds or what. But I don't want to get off track so let just say Chinese frames.
TTYTT...I vaguely remember someone saying or something I read regarding CF frames being produced in Taiwan. Not sure it was regarding the molds or what. But I don't want to get off track so let just say Chinese frames.
#12
Senior Member
Thread Starter
#14
Senior Member
Join Date: Apr 2010
Location: So Cal
Posts: 1,657
Bikes: Cervelo S2, Workswell 062, Banshee Spitfire
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I built up a Workswell 29r mountain bike last year. It's been over a year and so far it's been real good. No drama with assembly either. I ordered it with a BSA bottom bracket and 142 rear end. Coming from an aluminum Stumpjumper 29, the WW frame rode just as good and came in at 2lbs lighter.
Not a road bike, but so far a positive experience with an open mold company.
Not a road bike, but so far a positive experience with an open mold company.
#15
Full Member
ORIF - open reduction with internal fixation
it means the fractures were pretty serious and they couldn't reduce the gap to less than 2mm without opening the wound.
CRIF - is when the reduction is done from outside (no scalpal or scope) and then internal fixation
The fx NOF is often done CRIF where the cannulated screws are driven from outside. Floyd Landis had this surgery in 2003 when he crashed while training in San Diego. This was kept secret until after he won the TDF in 2006.
it means the fractures were pretty serious and they couldn't reduce the gap to less than 2mm without opening the wound.
CRIF - is when the reduction is done from outside (no scalpal or scope) and then internal fixation
The fx NOF is often done CRIF where the cannulated screws are driven from outside. Floyd Landis had this surgery in 2003 when he crashed while training in San Diego. This was kept secret until after he won the TDF in 2006.
#16
Senior Member
Thread Starter
ORIF - open reduction with internal fixation
it means the fractures were pretty serious and they couldn't reduce the gap to less than 2mm without opening the wound.
CRIF - is when the reduction is done from outside (no scalpal or scope) and then internal fixation
The fx NOF is often done CRIF where the cannulated screws are driven from outside. Floyd Landis had this surgery in 2003 when he crashed while training in San Diego. This was kept secret until after he won the TDF in 2006.
it means the fractures were pretty serious and they couldn't reduce the gap to less than 2mm without opening the wound.
CRIF - is when the reduction is done from outside (no scalpal or scope) and then internal fixation
The fx NOF is often done CRIF where the cannulated screws are driven from outside. Floyd Landis had this surgery in 2003 when he crashed while training in San Diego. This was kept secret until after he won the TDF in 2006.
In he case of my ankle, one plate down the inside of my lower leg and the other plate down the front edge of my shin were screwed together AND thru the tibia to compress the multiple fractures above my foot back together.
Ok boys and girls...this concludes today's lesson on ORIF surgery. Class dismissed
And now, back to our regularly scheduled topic already in progress
#17
Senior Member
Here is a progress shot of my Workswell R-066. Just waiting for the BB to arrive and it'll be done the same day. Hopefully it will come today. So far I have been very impressed with the quality of the frame. It was packaged well and there was no damage at all. No imperfections that I can see on the frame and when looking inside the various tubes, the carbon looks to be on par with my Focus Cayo.
The only minor gripe was that they seemed to have but a "bulkhead" at the back of the BB shell and made running the rear mech cable challenging. I had to drill a small hole in order to eliminate the unnecessary bends that would have been there. In speaking with a couple other 066 owners, neither had this bulkhead. My frame also had come with additional Di2 frame plugs in the event that I ever go Di2. Not sure it what is the reasoning behind the mysterious bulkhead.
Other than that it's been great. Running the cables has been mush easier than my Focus was. Can't wait to ride it.
The only minor gripe was that they seemed to have but a "bulkhead" at the back of the BB shell and made running the rear mech cable challenging. I had to drill a small hole in order to eliminate the unnecessary bends that would have been there. In speaking with a couple other 066 owners, neither had this bulkhead. My frame also had come with additional Di2 frame plugs in the event that I ever go Di2. Not sure it what is the reasoning behind the mysterious bulkhead.
Other than that it's been great. Running the cables has been mush easier than my Focus was. Can't wait to ride it.
#19
Senior Member
Join Date: Aug 2013
Location: Alexander City, Alabama
Posts: 806
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 52 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Okay I have the bottom bracket. I'm in a quandary about whether to use PTFE like it says in the instruction manual or use Loctite and void the warranty.
#20
Senior Member
Join Date: Jun 2016
Posts: 625
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 252 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
You can install it, hope it works, and if it never creaks, only remove it when the bearings get gritty. If it creaks, then you can pop it out and install it again with the loctite.
#21
Senior Member
Thread Starter
Here is a progress shot of my Workswell R-066. Just waiting for the BB to arrive and it'll be done the same day. Hopefully it will come today. So far I have been very impressed with the quality of the frame. It was packaged well and there was no damage at all. No imperfections that I can see on the frame and when looking inside the various tubes, the carbon looks to be on par with my Focus Cayo.
The only minor gripe was that they seemed to have but a "bulkhead" at the back of the BB shell and made running the rear mech cable challenging. I had to drill a small hole in order to eliminate the unnecessary bends that would have been there. In speaking with a couple other 066 owners, neither had this bulkhead. My frame also had come with additional Di2 frame plugs in the event that I ever go Di2. Not sure it what is the reasoning behind the mysterious bulkhead.
Other than that it's been great. Running the cables has been mush easier than my Focus was. Can't wait to ride it.
The only minor gripe was that they seemed to have but a "bulkhead" at the back of the BB shell and made running the rear mech cable challenging. I had to drill a small hole in order to eliminate the unnecessary bends that would have been there. In speaking with a couple other 066 owners, neither had this bulkhead. My frame also had come with additional Di2 frame plugs in the event that I ever go Di2. Not sure it what is the reasoning behind the mysterious bulkhead.
Other than that it's been great. Running the cables has been mush easier than my Focus was. Can't wait to ride it.
I'm curious about what wheels those are on what I have dubbed "Darth Poser with an orange twist!". The reason being I have NO clue which wheels I will use on my 066 when I start my build. I was really impressed with the Conti Gp 4000s II's in the short time (just over 100 miles) before I broke my leg...AGAIN.
Sry, I'll try not to get off topic too much. My excuse is I am under the influence of prescription medication. That and I a little drifty by nature.
#22
Senior Member
Lookin pretty sweet BP. I'm especially fond of the orange creamsicle colored bar tape. Oh...is that a 70's era GMC or Chevy pick-em up?
I'm curious about what wheels those are on what I have dubbed "Darth Poser with an orange twist!". The reason being I have NO clue which wheels I will use on my 066 when I start my build. I was really impressed with the Conti Gp 4000s II's in the short time (just over 100 miles) before I broke my leg...AGAIN.
Sry, I'll try not to get off topic too much. My excuse is I am under the influence of prescription medication. That and I a little drifty by nature.
I'm curious about what wheels those are on what I have dubbed "Darth Poser with an orange twist!". The reason being I have NO clue which wheels I will use on my 066 when I start my build. I was really impressed with the Conti Gp 4000s II's in the short time (just over 100 miles) before I broke my leg...AGAIN.
Sry, I'll try not to get off topic too much. My excuse is I am under the influence of prescription medication. That and I a little drifty by nature.
Thanks. I really like the orange as well. Thought about going "murdered out", but need to have some color. Gotta be different.
Yup that is my 73 Chevy. It's for sale by the way.....just saying.
Those particular wheels are H Plus Son Archetype rims on BHS hubs with Sapim laser spokes, laced 2x 24f/28r. They are great wheels! The hubs are amazing for the price. I'm constantly passing guys heavier than me when coasting downhill. I built them myself for about $400 from BHS.
I actually have some carbon wheels coming in the next week or two that will have a dash of orange on them and will really tie into the orange tape.
Darth Poser. I'm going to use that.
#23
Senior Member
Join Date: Aug 2013
Location: Alexander City, Alabama
Posts: 806
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 52 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
My installation of the gear shift cable through the chainstay.
I inserted some cable housing down the chainstay from the rear.
Then fed the cable back through the housing until it slides out the end. Pull the housing out of the chainstay.
I inserted some cable housing down the chainstay from the rear.
Then fed the cable back through the housing until it slides out the end. Pull the housing out of the chainstay.
#24
Senior Member
Thread Starter
What was your decision to go with Jagwire lex-sl housing based on and how does it differ from say the road pro kit? Are they both PTFE? Maybe I should consider something a little more flashy like this https://www.youtube.com/watch?v=4O7s...Y#t=254.175461 You know...like alligator boots! Maybe knot
Just curious since I haven't done much research on components yet other than the fact that I'm DEFINITELY going with a mostly Ultegra groupset.
And also should I go ahead and start ordering my parts NOW knowing full well I won't be able to ride for at least another 2 months? The Pen Man thinks I should start my build now but I'm afraid it will drive me NUTZ if I get it put together and then not be able to ride. I still have to get fitted before I order my 066 frame.
One thing is my left leg is an inch shorter than my right from my ankle fusion surgery. I believe I can compensate with platform pedals. I particularly like the Speedplay Zero's but the ARE pricey
Hell...I've done it again getting off topic and spinning outta control. Apologies Its late (or early and I'm rambling a bit)
Last edited by clubber; 07-14-16 at 01:43 AM.