Need Recommendations For 650b Wheelset
#1
Senior Member
Thread Starter
Need Recommendations For 650b Wheelset
Back in October I bought a (2018) Fuji Jari 1.3. I've got 1,000 miles on it so far and am enjoying the bike. The goal when I bought the bike was to eventually have two wheelsets – a 700C x 28± and a 650b x 47±, and ideally both would be tubeless. I live in Manhattan so one bike that could be both a decent road bike and a decent bike for dirt trails was appealing. Anyway, I'm starting to try to figure out what 650b wheelset I should go with. I don't want to spend $1,000+ on a wheelset. I mean I'm sure they're wonderful, but it's just not in my budget.
If I were just going to buy what I've heard decent things about that seem like a decent price I'd probably go with the alloy ones by Mason X Hunt…
https://www.huntbikewheels.cc/collec...-24deep-25wide
$379 is definitely budget-friendly. But is an internal width of 20mm good with 47mm tires? Wouldn't wider be better? And if I weigh 207 lbs (94kg), that's within the weight limit, but would 32h be better? I mean, what if I want to go go on a trip with a heavy-ish backpack or something?
I see WTB has wider rims, but I don't see them selling complete wheelsets. I'd actually love to figure out how to build my own wheels, but don't know what hubs and spokes I should buy. And so I can't really judge total cost on that one.
So any advice would be appreciated.
And if you have recommendations for black sidewall 650b tires, I'd appreciate that recommendation as well. Tan sidewalls seem to be all the rage on "road plus" tires, but they'd look pretty horrible on my bike. [I'm looking for something that's pavement friendly given that all my rides start and end on pavement.]
If I were just going to buy what I've heard decent things about that seem like a decent price I'd probably go with the alloy ones by Mason X Hunt…
https://www.huntbikewheels.cc/collec...-24deep-25wide
$379 is definitely budget-friendly. But is an internal width of 20mm good with 47mm tires? Wouldn't wider be better? And if I weigh 207 lbs (94kg), that's within the weight limit, but would 32h be better? I mean, what if I want to go go on a trip with a heavy-ish backpack or something?
I see WTB has wider rims, but I don't see them selling complete wheelsets. I'd actually love to figure out how to build my own wheels, but don't know what hubs and spokes I should buy. And so I can't really judge total cost on that one.
So any advice would be appreciated.
And if you have recommendations for black sidewall 650b tires, I'd appreciate that recommendation as well. Tan sidewalls seem to be all the rage on "road plus" tires, but they'd look pretty horrible on my bike. [I'm looking for something that's pavement friendly given that all my rides start and end on pavement.]
#2
Senior Member
Join Date: Jan 2010
Location: San Diego
Posts: 2,235
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 353 Post(s)
Likes: 0
Liked 92 Times
in
67 Posts
Make sure if you go wide rims the frame can take it. All the WTB 650x47 road plus is notorious for ballooning up on wider rims. If you put a Byway on a 22-23mm rim it's going to be 50-51mm wide. If you want it to fit true to actual size you are better off with 19-20mm rims.
#3
junior
Join Date: Oct 2012
Location: Fresno, Calif.
Posts: 282
Bikes: 2020 Surly ECR / 2018 Norco Search XR steel gravel bike with GRX / 1983 Bianchi Campione D'Italia / Gary Fisher Wingra / Motobecane Nomade mixte (daughter's)
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 72 Post(s)
Liked 12 Times
in
11 Posts
I just bought a new 650b wheel set for my Norco Search XR about 3 months ago. It originally came with 700c with 40c tires. I weigh 205-207, depending on donut supply that week.
I had the wheel set built by Brett, the guy from Mill City Cycles, and I paid $425 for Bitex hubs on Kinlin TL-23 asymmetrical alloy rims 28/28 hole with Sapim Race double-butted spokes. so far, I LOVE them. 23mm internal width, using 47c tires. Aren't Hunt wheels mass produced? I thought it would be good to have mine custom made. Brett worked with me on my budget, and suggested several options. He also said Hunt wheels are fine, but pointed out the advantages/differences between what he can offer and the Hunts. Looking at it objectively, his deal sounded better to me, plus i supported a domestic wheel builder. Final price was $475, including shipping halfway across the country.
https://www.facebook.com/millcitycycle/
My Teravail Cannonball 650b x 47 tires measure out at 47 with the rims.
eric/fresno, ca.
I had the wheel set built by Brett, the guy from Mill City Cycles, and I paid $425 for Bitex hubs on Kinlin TL-23 asymmetrical alloy rims 28/28 hole with Sapim Race double-butted spokes. so far, I LOVE them. 23mm internal width, using 47c tires. Aren't Hunt wheels mass produced? I thought it would be good to have mine custom made. Brett worked with me on my budget, and suggested several options. He also said Hunt wheels are fine, but pointed out the advantages/differences between what he can offer and the Hunts. Looking at it objectively, his deal sounded better to me, plus i supported a domestic wheel builder. Final price was $475, including shipping halfway across the country.
https://www.facebook.com/millcitycycle/
My Teravail Cannonball 650b x 47 tires measure out at 47 with the rims.
eric/fresno, ca.
#4
Senior Member
Thread Starter
Make sure if you go wide rims the frame can take it. All the WTB 650x47 road plus is notorious for ballooning up on wider rims. If you put a Byway on a 22-23mm rim it's going to be 50-51mm wide. If you want it to fit true to actual size you are better off with 19-20mm rims.
I want whatever rides better. I supposed I can always get a smaller tire, like a 45 or something… And I'm not looking for a knobby tire, so that helps with clearance.
#5
Senior Member
Thread Starter
I just bought a new 650b wheel set for my Norco Search XR about 3 months ago. It originally came with 700c with 40c tires. I weigh 205-207, depending on donut supply that week.
I had the wheel set built by Brett, the guy from Mill City Cycles, and I paid $425 for Bitex hubs on Kinlin TL-23 asymmetrical alloy rims 28/28 hole with Sapim Race double-butted spokes. so far, I LOVE them. 23mm internal width, using 47c tires. Aren't Hunt wheels mass produced? I thought it would be good to have mine custom made. Brett worked with me on my budget, and suggested several options. He also said Hunt wheels are fine, but pointed out the advantages/differences between what he can offer and the Hunts. Looking at it objectively, his deal sounded better to me, plus i supported a domestic wheel builder. Final price was $475, including shipping halfway across the country.
https://www.facebook.com/millcitycycle/
My Teravail Cannonball 650b x 47 tires measure out at 47 with the rims.
I had the wheel set built by Brett, the guy from Mill City Cycles, and I paid $425 for Bitex hubs on Kinlin TL-23 asymmetrical alloy rims 28/28 hole with Sapim Race double-butted spokes. so far, I LOVE them. 23mm internal width, using 47c tires. Aren't Hunt wheels mass produced? I thought it would be good to have mine custom made. Brett worked with me on my budget, and suggested several options. He also said Hunt wheels are fine, but pointed out the advantages/differences between what he can offer and the Hunts. Looking at it objectively, his deal sounded better to me, plus i supported a domestic wheel builder. Final price was $475, including shipping halfway across the country.
https://www.facebook.com/millcitycycle/
My Teravail Cannonball 650b x 47 tires measure out at 47 with the rims.
#6
Senior Member
Join Date: Jan 2010
Location: San Diego
Posts: 2,235
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 353 Post(s)
Likes: 0
Liked 92 Times
in
67 Posts
Last year Fuji was saying the bike could take 650b x 50. Now they say 650b x 47, but they added a note saying it depends on the rim and the tire – probably exactly for the reasons you mention.
I want whatever rides better. I supposed I can always get a smaller tire, like a 45 or something… And I'm not looking for a knobby tire, so that helps with clearance.
I want whatever rides better. I supposed I can always get a smaller tire, like a 45 or something… And I'm not looking for a knobby tire, so that helps with clearance.
#8
Senior Member
I'm pretty happy with Easton EA70AX... got them for around $400 24mm internal and put some Donnelly MSO 42's(measure 43.1) on there. Seem built fairly strong and kinda heavy being nearly 1700g. I also have Enve G27 with 27mm internal and WTB Byways ( which measure 47.10 so far @ 40psi) 1320g for the rims.. F'kn ride like a best sofa you ever sat in.
#9
just keep riding
Join Date: Feb 2005
Location: Milledgeville, Georgia
Posts: 13,560
Bikes: 2018 Black Mountain Cycles MCD,2017 Advocate Cycles Seldom Seen Drop Bar, 2017 Niner Jet 9 Alloy, 2015 Zukas custom road, 2003 KHS Milano Tandem, 1986 Nishiki Cadence rigid MTB, 1980ish Fuji S-12S
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 173 Post(s)
Liked 33 Times
in
22 Posts
I would look around for a local wheelbuilder and tell them your needs and your budget.
#10
Senior Member
Thread Starter
#11
Reno/Seattle/NYC
If you do end up finding a way to estimate the total cost of wheelbuilding, 718 Cyclery in Brooklyn does free classes once a month. It's not the most convenient shop for you, but they seem to know their adventure biking stuff, and could probably give you tips and ideas (and maybe an estimate) for specific 650b wheels that would fit your Jari! I've been looking at Salsa's and All-Citys with them, and it seems like a great independent shop, despite the location.
#12
Senior Member
Thread Starter
#14
Senior Member
Now you'll try it and get screwed and blame me
Seriously no problems, check out Backcountry on ebay cheaper than their online store.
#15
junior
Join Date: Oct 2012
Location: Fresno, Calif.
Posts: 282
Bikes: 2020 Surly ECR / 2018 Norco Search XR steel gravel bike with GRX / 1983 Bianchi Campione D'Italia / Gary Fisher Wingra / Motobecane Nomade mixte (daughter's)
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 72 Post(s)
Liked 12 Times
in
11 Posts
eric/fresno, ca.
#16
junior
Join Date: Oct 2012
Location: Fresno, Calif.
Posts: 282
Bikes: 2020 Surly ECR / 2018 Norco Search XR steel gravel bike with GRX / 1983 Bianchi Campione D'Italia / Gary Fisher Wingra / Motobecane Nomade mixte (daughter's)
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 72 Post(s)
Liked 12 Times
in
11 Posts
If you wish to contact Mill City/Brett, email him about your needs. I was initially targeting "name brand" components, but i'm always open to options, and that's what we went with in the end. I'm a bit hesitant to say this, but some sources have said the Bitex hub specs of my wheels are very similar to what Hunt uses. He seriously worked within my budget, suggested options, discussed the pros and cons, and was very patient with my emailed followup questions. millcitycycle@gmail.com I would think any cyclist who builds for other cyclists would do the same. If they do not, move on until you find someone you're comfortable with. Wheels (and frames) are the foundation of the bike. Don't leave it to chance. And good luck!
eric/fresno, ca.
#17
Full Member
If I were just going to buy what I've heard decent things about that seem like a decent price I'd probably go with the alloy ones by Mason X Hunt…
https://www.huntbikewheels.cc/collec...-24deep-25wide
$379 is definitely budget-friendly. But is an internal width of 20mm good with 47mm tires? Wouldn't wider be better? And if I weigh 207 lbs (94kg), that's within the weight limit, but would 32h be better? I mean, what if I want to go go on a trip with a heavy-ish backpack or something?
https://www.huntbikewheels.cc/collec...-24deep-25wide
$379 is definitely budget-friendly. But is an internal width of 20mm good with 47mm tires? Wouldn't wider be better? And if I weigh 207 lbs (94kg), that's within the weight limit, but would 32h be better? I mean, what if I want to go go on a trip with a heavy-ish backpack or something?
#18
Senior Member
Thread Starter
#19
Senior Member
Thread Starter
As a data point: I've been using the Mason X Hunt 650b alloy wheels on my gravel bike for the past year and a half. You and I weigh about the same and I've done some pretty heavily loaded rides with no issues (backpack, 4 water bottle cages and bottles, seat bag, and large top tube bag). I leave the WTB Horizons on most of the time, but have a set of Terrene Elwoods for more hardcore trails. No complaints and the wheels remain true. I bought the wheelset as sort of an experiment to see how I liked 650b. I have to say that I'm a convert. The extra tire size and reduced overall circumference, relative to 700c with 40mm tires, is really nice.
#20
Senior Member
Thread Starter
I had the wheel set built by Brett, the guy from Mill City Cycles, and I paid $425 for Bitex hubs on Kinlin TL-23 asymmetrical alloy rims 28/28 hole with Sapim Race double-butted spokes. so far, I LOVE them. 23mm internal width, using 47c tires. Aren't Hunt wheels mass produced? I thought it would be good to have mine custom made. Brett worked with me on my budget, and suggested several options. He also said Hunt wheels are fine, but pointed out the advantages/differences between what he can offer and the Hunts. Looking at it objectively, his deal sounded better to me, plus i supported a domestic wheel builder. Final price was $475, including shipping halfway across the country.
Now I just have to sleep on it (so to speak)…
#21
just keep riding
Join Date: Feb 2005
Location: Milledgeville, Georgia
Posts: 13,560
Bikes: 2018 Black Mountain Cycles MCD,2017 Advocate Cycles Seldom Seen Drop Bar, 2017 Niner Jet 9 Alloy, 2015 Zukas custom road, 2003 KHS Milano Tandem, 1986 Nishiki Cadence rigid MTB, 1980ish Fuji S-12S
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 173 Post(s)
Liked 33 Times
in
22 Posts
That looks like a good setup and a good price from Mill City Cycles. The same components would cost about $350 from Bike Hub Store if you wanted to build them yourself. That's a good option if you already have the knowledge and the tools, but otherwise it's an investment.
I went with a similar component list for the wheels I built for myself. I used WTB i23 Frequency rims, Bitex rear hub, SP Dynamo front hub, 32/32 Sapim Race spokes and WTB Byway 650Bx47. They have worked out great. I think 28 spokes should be plenty. I went with 32 as much because it is what I am used to building as for any concerns about durability.
I went with a similar component list for the wheels I built for myself. I used WTB i23 Frequency rims, Bitex rear hub, SP Dynamo front hub, 32/32 Sapim Race spokes and WTB Byway 650Bx47. They have worked out great. I think 28 spokes should be plenty. I went with 32 as much because it is what I am used to building as for any concerns about durability.
#22
junior
Join Date: Oct 2012
Location: Fresno, Calif.
Posts: 282
Bikes: 2020 Surly ECR / 2018 Norco Search XR steel gravel bike with GRX / 1983 Bianchi Campione D'Italia / Gary Fisher Wingra / Motobecane Nomade mixte (daughter's)
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 72 Post(s)
Liked 12 Times
in
11 Posts
My only regret with the Mill City Cycles wheel order.... i should have considered purple colored hubs... lol i may go with colored valves some day.
eric/fresno, ca.
eric/fresno, ca.
#23
Senior Member
Thread Starter
That looks like a good setup and a good price from Mill City Cycles. The same components would cost about $350 from Bike Hub Store if you wanted to build them yourself. That's a good option if you already have the knowledge and the tools, but otherwise it's an investment.
I went with a similar component list for the wheels I built for myself. I used WTB i23 Frequency rims, Bitex rear hub, SP Dynamo front hub, 32/32 Sapim Race spokes and WTB Byway 650Bx47. They have worked out great. I think 28 spokes should be plenty. I went with 32 as much because it is what I am used to building as for any concerns about durability.
I went with a similar component list for the wheels I built for myself. I used WTB i23 Frequency rims, Bitex rear hub, SP Dynamo front hub, 32/32 Sapim Race spokes and WTB Byway 650Bx47. They have worked out great. I think 28 spokes should be plenty. I went with 32 as much because it is what I am used to building as for any concerns about durability.
I don't think purple was an option. He said the color choices were red, blue, green, silver and black. The blue was a more royal blue than your bike. I was sorta hoping yellow would be an option since the graphics on my bike are yellow. But I'll probably go with black – I'd rather have a neutral color than a color that doesn't work.
#24
Senior Member
Thread Starter
Thanks for the recommendation!
Last edited by JayNYC; 02-25-19 at 01:13 PM.
#25
Banned
Redux:
wholesaler built wheels can come in built for the cost of the sum of the parts @, retail.. and your bike shop can hand check them for you when they get them....
wholesaler built wheels can come in built for the cost of the sum of the parts @, retail.. and your bike shop can hand check them for you when they get them....