Purchase decision - Columbus SLX vs Neuron
#1
Newbie
Thread Starter
Join Date: May 2019
Posts: 21
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Liked 0 Times
in
0 Posts
Purchase decision - Columbus SLX vs Neuron
Hi,
I`m looking for your opinion, pros and cons between 2 bikes I`m considering to purchase but not sure which one to go for. Both are steel columbus tubing as I`m looking for it but not sure which one to go in terms of: 1) geometry, I`m looking a confrotable ride position and not to racer leaned forward. 2) liquidity - I`m constantly changing bikes and would like to understand which would be better to sell in a relatively fast time and for decent amount. 3) which one would you pick?
the options are:
Massi Prestige (not Masi) - Columbus SLX - weight 10.8kgs - Mixture of several component models. - Cost $ 200
Eddie Mercx Arcobaleno - Columbus Neuron - weight 10.2kgs - Shimano Ultegra specs - Cost $ 300
Note: I`m considering and tending to go with the EM but not sure if buying a classic SLX frame would be better for reselling and comfortably riding as I could not find much info on Neuron.....
Unfortunately I`m new here and cannot post pictures but hopefully soon I`ll have more posts and be able to update this post.
Thanks a lot
I`m looking for your opinion, pros and cons between 2 bikes I`m considering to purchase but not sure which one to go for. Both are steel columbus tubing as I`m looking for it but not sure which one to go in terms of: 1) geometry, I`m looking a confrotable ride position and not to racer leaned forward. 2) liquidity - I`m constantly changing bikes and would like to understand which would be better to sell in a relatively fast time and for decent amount. 3) which one would you pick?
the options are:
Massi Prestige (not Masi) - Columbus SLX - weight 10.8kgs - Mixture of several component models. - Cost $ 200
Eddie Mercx Arcobaleno - Columbus Neuron - weight 10.2kgs - Shimano Ultegra specs - Cost $ 300
Note: I`m considering and tending to go with the EM but not sure if buying a classic SLX frame would be better for reselling and comfortably riding as I could not find much info on Neuron.....
Unfortunately I`m new here and cannot post pictures but hopefully soon I`ll have more posts and be able to update this post.
Thanks a lot
Likes For 63rickert:
#5
Senior Member
If those have ten problems not visible in photos they are still screaming deals. Buy both now before someone else does. Ride them. Keep the one you like most. Sell the other for what you paid for both.
Likes For 63rickert:
#6
Senior Member
Join Date: Sep 2017
Location: Hotel CA / DFW
Posts: 1,732
Bikes: 83 Colnago Super, 87 50th Daccordi, 79 & 87 Guerciotti's, 90s DB/GT Mtn Bikes, 90s Colnago Master and Titanio, 96 Serotta Colorado TG, 95/05 Colnago C40/C50, 06 DbyLS TI, 08 Lemond Filmore FG SS, 12 Cervelo R3, 20/15 Surly Stragler & Steamroller
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 601 Post(s)
Liked 779 Times
in
497 Posts
Those are crazy good prices.
SLX was the best steel for its era and Columbus Neuron is about the best steel ever produced.
Columbus Neuron is made from Nivacrom steel,
If you want more vintage look the chrome is very nice.
EM are cult classic frames.
Both bikes look to have nice wheels.
SLX was the best steel for its era and Columbus Neuron is about the best steel ever produced.
Columbus Neuron is made from Nivacrom steel,
If you want more vintage look the chrome is very nice.
EM are cult classic frames.
Both bikes look to have nice wheels.
#7
Newbie
Thread Starter
Join Date: May 2019
Posts: 21
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Liked 0 Times
in
0 Posts
Those are crazy good prices.
SLX was the best steel for its era and Columbus Neuron is about the best steel ever produced.
Columbus Neuron is made from Nivacrom steel,
If you want more vintage look the chrome is very nice.
EM are cult classic frames.
Both bikes look to have nice wheels.
SLX was the best steel for its era and Columbus Neuron is about the best steel ever produced.
Columbus Neuron is made from Nivacrom steel,
If you want more vintage look the chrome is very nice.
EM are cult classic frames.
Both bikes look to have nice wheels.
Yeah, I`m going for the EM given its an EM, Columbus Neuron and all specs are Ultegra. Will consider the suggestion above to buy both and sell the one I like less but unfortunately this might not happen given cash flow restrictions hehe
#9
1/2 as far in 2x the time
Join Date: Nov 2013
Location: Northern Bergen County, NJ
Posts: 1,746
Bikes: Yes, Please.
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 499 Post(s)
Liked 285 Times
in
222 Posts
Both are race oriented bikes, so they really don't seem to fit your requirements...
If you really can only grab one, take the EM. Make sure the frame is ok!
Cheers, Eric
If you really can only grab one, take the EM. Make sure the frame is ok!
Cheers, Eric
#10
Hump, what hump?
Join Date: Dec 2003
Location: SC midlands
Posts: 1,934
Bikes: See signature
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 337 Post(s)
Liked 227 Times
in
145 Posts
Who the heck finds a Merckx for $300?!!?
__________________
2010 AB T1X ** 2010 Cannondale SIX-5 ** 1993 Cannondale RS900 ** 1988 Bottecchia Team Record ** 1989 Bianchi Brava ** 1988 Nishiki Olympic ** 1987 Centurion Ironman Expert(2) ** 1985 DeRosa Professional SLX ** 1982 Colnago Super ** 1982 Basso Gap ** 198? Ciocc Competition SL ** 19?? Roberts Audax ** 198? Brian Rourke ** 1982 Mercian Olympic ** 1970 Raleigh Professional MK I ** 1952 Raleigh Sports
2010 AB T1X ** 2010 Cannondale SIX-5 ** 1993 Cannondale RS900 ** 1988 Bottecchia Team Record ** 1989 Bianchi Brava ** 1988 Nishiki Olympic ** 1987 Centurion Ironman Expert(2) ** 1985 DeRosa Professional SLX ** 1982 Colnago Super ** 1982 Basso Gap ** 198? Ciocc Competition SL ** 19?? Roberts Audax ** 198? Brian Rourke ** 1982 Mercian Olympic ** 1970 Raleigh Professional MK I ** 1952 Raleigh Sports
Likes For horatio:
#11
Senior Member
Before buying the Merckx confirm the seat binder works. It's a good design and should not cause any issue. However it is vulnerable to truck mechanics. The sort who should not be near one of these but are. If someone did succeed in damaging that piece not easy to fix.
If damaged offer the seller $200 and buy it anyway.
If damaged offer the seller $200 and buy it anyway.
#12
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,327
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3898 Post(s)
Liked 4,830 Times
in
2,228 Posts
Similar sizes visually.
Caution: Merckx owner doesn't know how to change a flat.
Buy the one that 'feels' right on a ride.
2) liquidity = ???? Why changing bikes so often; find a couple (or more) you like and stick with them for a while. Unless it's a profitable side hobby.
on a separate note - Shimano made the ugliest integrated shift/brake levers a human could image.
Caution: Merckx owner doesn't know how to change a flat.
Buy the one that 'feels' right on a ride.
2) liquidity = ???? Why changing bikes so often; find a couple (or more) you like and stick with them for a while. Unless it's a profitable side hobby.
on a separate note - Shimano made the ugliest integrated shift/brake levers a human could image.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
Likes For Wildwood:
#13
Senior Member
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
Right? That's why I hate this forum.
__________________
My Bikes
My Bikes
#14
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,633
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4678 Post(s)
Liked 5,793 Times
in
2,280 Posts
Framebuilders buy tubing.
Cyclists buy frames and complete bikes.
Both are outstanding buys, get 'em both if you can afford to, sell the Merckx to @Andy_K for $500 and you get a free bike.
Cyclists buy frames and complete bikes.
Both are outstanding buys, get 'em both if you can afford to, sell the Merckx to @Andy_K for $500 and you get a free bike.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#15
weapons-grade bolognium
Join Date: Dec 2008
Location: Across the street from Chicago
Posts: 6,344
Bikes: Battaglin Cromor, Ciocc Designer 84, Schwinn Superior 1981
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 985 Post(s)
Liked 2,378 Times
in
891 Posts
Both - sort out the details later...essentially a free bike +cash if you do it right.
Likes For thinktubes:
#16
Senior Member
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,874
Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1856 Post(s)
Liked 664 Times
in
506 Posts
As far as making a comfy bike out of it, I think the Merkcx is ahead. The frame geometry used by EM usually has the seat tube angled less upright than other road bikes by a few degrees. This could make the bike more amenable to a higher handlebar.
SLX is made of Columbus' version of CrMo, called Cyclex. Essentially nothing sets that alloy apart from the CrMo of today. What sets it aside from Columbus other archetypal tubing SL (also just CrMo) is that SLX has helical ridges inside the butted area of the main tubes. This adds a little strength at the ends of the tubes and adds a little weight compared to SL, and some folks think they can feel a little added harshness. I couldn't say, and the Magnificent 7 write-up was not conclusive. I have a frame which I like a lot and I believe to be SL, but I've never owned or ridden an SLX frame.
The Niobium is made from a much more modern and stronger steel which Columbus calls Nivachrom. It's specs show it is about 150% stronger than CrMo based on metallurgical lab tests. To make a Nivachrom frame that is as strong as a CrMo frame, you need about 33% less Nivachrom all else being equal. The Merkcx should therefore be lighter, more lively, and perhaps better at shock absorption than the Massi frame. Again the Merkcx favors your goal for comfort.
I would not buy either at the moment, but that's mainly because Mrs. Road Fan has begun to steal my bikes and parts that she thinks would work better under her butt than under mine. If I brought the Merkcx and the Massi into the house, I'm sure she'd swipe the Merkcx. And I don't think I'd buy the Massi by itself. If it was a Masi, it might be different.
SLX is made of Columbus' version of CrMo, called Cyclex. Essentially nothing sets that alloy apart from the CrMo of today. What sets it aside from Columbus other archetypal tubing SL (also just CrMo) is that SLX has helical ridges inside the butted area of the main tubes. This adds a little strength at the ends of the tubes and adds a little weight compared to SL, and some folks think they can feel a little added harshness. I couldn't say, and the Magnificent 7 write-up was not conclusive. I have a frame which I like a lot and I believe to be SL, but I've never owned or ridden an SLX frame.
The Niobium is made from a much more modern and stronger steel which Columbus calls Nivachrom. It's specs show it is about 150% stronger than CrMo based on metallurgical lab tests. To make a Nivachrom frame that is as strong as a CrMo frame, you need about 33% less Nivachrom all else being equal. The Merkcx should therefore be lighter, more lively, and perhaps better at shock absorption than the Massi frame. Again the Merkcx favors your goal for comfort.
I would not buy either at the moment, but that's mainly because Mrs. Road Fan has begun to steal my bikes and parts that she thinks would work better under her butt than under mine. If I brought the Merkcx and the Massi into the house, I'm sure she'd swipe the Merkcx. And I don't think I'd buy the Massi by itself. If it was a Masi, it might be different.
#17
Senior Member
If my eyes arent deceiving me, I believe the Eddy Merckx has Ti stem and seatpost. Those together could go for more than 300. Just a shame its aluminium (not a fan)..
I would try asking to switch around components, the Massi with those 2 parts is a no-brainer decision.
I would try asking to switch around components, the Massi with those 2 parts is a no-brainer decision.
#18
Newbie
Thread Starter
Join Date: May 2019
Posts: 21
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Liked 0 Times
in
0 Posts
As far as making a comfy bike out of it, I think the Merkcx is ahead. The frame geometry used by EM usually has the seat tube angled less upright than other road bikes by a few degrees. This could make the bike more amenable to a higher handlebar.
SLX is made of Columbus' version of CrMo, called Cyclex. Essentially nothing sets that alloy apart from the CrMo of today. What sets it aside from Columbus other archetypal tubing SL (also just CrMo) is that SLX has helical ridges inside the butted area of the main tubes. This adds a little strength at the ends of the tubes and adds a little weight compared to SL, and some folks think they can feel a little added harshness. I couldn't say, and the Magnificent 7 write-up was not conclusive. I have a frame which I like a lot and I believe to be SL, but I've never owned or ridden an SLX frame.
The Niobium is made from a much more modern and stronger steel which Columbus calls Nivachrom. It's specs show it is about 150% stronger than CrMo based on metallurgical lab tests. To make a Nivachrom frame that is as strong as a CrMo frame, you need about 33% less Nivachrom all else being equal. The Merkcx should therefore be lighter, more lively, and perhaps better at shock absorption than the Massi frame. Again the Merkcx favors your goal for comfort.
I would not buy either at the moment, but that's mainly because Mrs. Road Fan has begun to steal my bikes and parts that she thinks would work better under her butt than under mine. If I brought the Merkcx and the Massi into the house, I'm sure she'd swipe the Merkcx. And I don't think I'd buy the Massi by itself. If it was a Masi, it might be different.
SLX is made of Columbus' version of CrMo, called Cyclex. Essentially nothing sets that alloy apart from the CrMo of today. What sets it aside from Columbus other archetypal tubing SL (also just CrMo) is that SLX has helical ridges inside the butted area of the main tubes. This adds a little strength at the ends of the tubes and adds a little weight compared to SL, and some folks think they can feel a little added harshness. I couldn't say, and the Magnificent 7 write-up was not conclusive. I have a frame which I like a lot and I believe to be SL, but I've never owned or ridden an SLX frame.
The Niobium is made from a much more modern and stronger steel which Columbus calls Nivachrom. It's specs show it is about 150% stronger than CrMo based on metallurgical lab tests. To make a Nivachrom frame that is as strong as a CrMo frame, you need about 33% less Nivachrom all else being equal. The Merkcx should therefore be lighter, more lively, and perhaps better at shock absorption than the Massi frame. Again the Merkcx favors your goal for comfort.
I would not buy either at the moment, but that's mainly because Mrs. Road Fan has begun to steal my bikes and parts that she thinks would work better under her butt than under mine. If I brought the Merkcx and the Massi into the house, I'm sure she'd swipe the Merkcx. And I don't think I'd buy the Massi by itself. If it was a Masi, it might be different.
Thanks a lot for the help and explanation, has enlightened me a lot.
#19
Senior Member
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,874
Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1856 Post(s)
Liked 664 Times
in
506 Posts
I'm pretty sure Neuron is steel, not aluminum.
#20
Senior Member
Join Date: Apr 2005
Location: Ann Arbor, MI
Posts: 16,874
Bikes: 1980 Masi, 1984 Mondonico, 1984 Trek 610, 1980 Woodrup Giro, 2005 Mondonico Futura Leggera ELOS, 1967 PX10E, 1971 Peugeot UO-8
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 1856 Post(s)
Liked 664 Times
in
506 Posts
#22
Senior Member
#23
Newbie
Thread Starter
Join Date: May 2019
Posts: 21
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Liked 0 Times
in
0 Posts
Ok... I'm not sure ir its a big issue but I found a deep mark on painting of the EM but owner says it's only a deep scratch from him leaving the bike in a fence to open his gate. I know steel can be fixed but I don't have the knowledge and now I'm suspicious if I should proceed still...
I also found a Mendiz Spanish brand with Columbus Neuron and seems to be in a better conservation....I know EM is EM but given these new informations I'm tending to go for the Mendiz that is same tubing but better conditions...
Waiting on more images to make final conclusions.
I also found a Mendiz Spanish brand with Columbus Neuron and seems to be in a better conservation....I know EM is EM but given these new informations I'm tending to go for the Mendiz that is same tubing but better conditions...
Waiting on more images to make final conclusions.
#24
Newbie
Thread Starter
Join Date: May 2019
Posts: 21
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Liked 0 Times
in
0 Posts
So to be more direct for now depending on the images from the EM frame if not too much I'd go for..
1) EM
2) mendiz Columbus neuron
3) massi slx
Probably getting 2 of these 3 since you guys are inspiring me so much on not allowing these treasures to pass by
1) EM
2) mendiz Columbus neuron
3) massi slx
Probably getting 2 of these 3 since you guys are inspiring me so much on not allowing these treasures to pass by
#25
Newbie
Thread Starter
Join Date: May 2019
Posts: 21
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Liked 0 Times
in
0 Posts
Just replying (with a lot of delay - apologies) with my final decision and some pics
Mendiz Columbus Neuron and full DuraAce componentes and wheels. Hell of a bike, very smooth, I'm very very happy with the purchase! Hope you like it. Paid 290.00 euros +20euros shipping to my house,. I'm happy to help you with similar good deals, if you are interested, please message me.
Cheers and good ride everyone!
Mendiz Columbus Neuron and full DuraAce componentes and wheels. Hell of a bike, very smooth, I'm very very happy with the purchase! Hope you like it. Paid 290.00 euros +20euros shipping to my house,. I'm happy to help you with similar good deals, if you are interested, please message me.
Cheers and good ride everyone!