Replacing old Shimano 105 BR-1050 caliper
#1
Newbie
Thread Starter
Join Date: Jun 2019
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Replacing old Shimano 105 BR-1050 caliper
Hi there,
I've recently had my front caliper stolen (Shimano 105 BR-1050; recessed, 47-57 reach) from my dear mid-80s commuter road bike, and am having a very hard time finding a fitting replacement caliper. I'm wondering whether I might use the occasion to upgrade to something else. Any recommendations on:
a) where to find a replacement caliper of the original type;
b) what to get instead? I'd like to stick with a (vintagey, ideally) Shimano. I'm wondering what might fit the bill for old recessed mid-reach models; whether to opt for dual-pivot brakes in case; whether to consider getting super-SLR's instead of the SLR's I've had.
I generally don't know much about these things, so any guidance would be much appreciated. Cheers!
I've recently had my front caliper stolen (Shimano 105 BR-1050; recessed, 47-57 reach) from my dear mid-80s commuter road bike, and am having a very hard time finding a fitting replacement caliper. I'm wondering whether I might use the occasion to upgrade to something else. Any recommendations on:
a) where to find a replacement caliper of the original type;
b) what to get instead? I'd like to stick with a (vintagey, ideally) Shimano. I'm wondering what might fit the bill for old recessed mid-reach models; whether to opt for dual-pivot brakes in case; whether to consider getting super-SLR's instead of the SLR's I've had.
I generally don't know much about these things, so any guidance would be much appreciated. Cheers!
#2
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,075
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4201 Post(s)
Liked 3,858 Times
in
2,306 Posts
Are you sure of the reach and model? I don't remember a long reach 105 caliper. My quick look up for images shows only shorter reach (39-47 aprox) versions.
I have to say that if I'm right about reach the replacement options are rather great. If you really do need the 47-57 reach the options are still reasonable. I would strongly consider dual pivot calipers of the early 1990s from Shimano. They should still work well with your levers yet provide greater power and modulation. Andy
I have to say that if I'm right about reach the replacement options are rather great. If you really do need the 47-57 reach the options are still reasonable. I would strongly consider dual pivot calipers of the early 1990s from Shimano. They should still work well with your levers yet provide greater power and modulation. Andy
__________________
AndrewRStewart
AndrewRStewart
#3
Insane Bicycle Mechanic
Join Date: Mar 2008
Location: other Vancouver
Posts: 9,837
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 805 Post(s)
Liked 705 Times
in
377 Posts
Are you sure of the reach and model? I don't remember a long reach 105 caliper. My quick look up for images shows only shorter reach (39-47 aprox) versions.
I have to say that if I'm right about reach the replacement options are rather great. If you really do need the 47-57 reach the options are still reasonable. I would strongly consider dual pivot calipers of the early 1990s from Shimano. They should still work well with your levers yet provide greater power and modulation. Andy
I have to say that if I'm right about reach the replacement options are rather great. If you really do need the 47-57 reach the options are still reasonable. I would strongly consider dual pivot calipers of the early 1990s from Shimano. They should still work well with your levers yet provide greater power and modulation. Andy
VeloBase.com - Component: Shimano BR-1050, 105 (47-57mm)
I agree that a dual-pivot caliper would be superior. One of my all-time favorite brakes are RX-100 calipers: simple, un-fancy, simple to adjust and stayed adjusted.
__________________
Jeff Wills
Comcast nuked my web page. It will return soon..
Jeff Wills
Comcast nuked my web page. It will return soon..
#4
Newbie
Thread Starter
Join Date: Jun 2019
Posts: 3
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Thanks, Andy! I'm sure of both, yes--still have the rear caliper, and briefly talked about model with a savvy mechanic, who suggested that the usual 39-49 wouldn't do. The Velobase (see Jeff Wills's link below) listing info is consistent with my knowledge of the bike overall (roughly '86 KTM Strada, with Shimano 105 groupset).
Any favorites from 1990s dual-pivot Shimanos you mentioned, Andy? Cheers!
Any favorites from 1990s dual-pivot Shimanos you mentioned, Andy? Cheers!
#6
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,075
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4201 Post(s)
Liked 3,858 Times
in
2,306 Posts
I'll have to save VeloBase for the future. I run Shimano R650 and R451 on a few bikes and for a modern dual pivot with 50-55mm reach these are my favs. I have had Campy NR/SR calipers since 1976, so for a single pivot they're still my choice.
Even though I've worked on a few thousand bikes' brakes I still note how such a simple system of levers and cables can feel so widely different between various brands and grades. Andy
Even though I've worked on a few thousand bikes' brakes I still note how such a simple system of levers and cables can feel so widely different between various brands and grades. Andy
__________________
AndrewRStewart
AndrewRStewart
#7
Senior Member
#8
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
Andy, long reach Shimano 105 DP brakes do exist. I have a pair, engraved BR-1055 and 47-57 mm, installed on a 2013 Surly Pacer. Mine are nutted, not recessed mount, and I use drilled out recess nuts as bushings to mount them on this bike which is set up for recessed brakes.
I got these brakes attached to a 1985 Trek 400 I bought used in late 1999 and kept them after converting the Trek to a fixie for my son-in-law. He fitted an old single pull long reach caliper as a front brake so the 105's were surplus until I got the Surly.
I got these brakes attached to a 1985 Trek 400 I bought used in late 1999 and kept them after converting the Trek to a fixie for my son-in-law. He fitted an old single pull long reach caliper as a front brake so the 105's were surplus until I got the Surly.
#9
Insane Bicycle Mechanic
Join Date: Mar 2008
Location: other Vancouver
Posts: 9,837
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 805 Post(s)
Liked 705 Times
in
377 Posts
Andy, long reach Shimano 105 DP brakes do exist. I have a pair, engraved BR-1055 and 47-57 mm, installed on a 2013 Surly Pacer. Mine are nutted, not recessed mount, and I use drilled out recess nuts as bushings to mount them on this bike which is set up for recessed brakes.
I got these brakes attached to a 1985 Trek 400 I bought used in late 1999 and kept them after converting the Trek to a fixie for my son-in-law. He fitted an old single pull long reach caliper as a front brake so the 105's were surplus until I got the Surly.
I got these brakes attached to a 1985 Trek 400 I bought used in late 1999 and kept them after converting the Trek to a fixie for my son-in-law. He fitted an old single pull long reach caliper as a front brake so the 105's were surplus until I got the Surly.
__________________
Jeff Wills
Comcast nuked my web page. It will return soon..
Jeff Wills
Comcast nuked my web page. It will return soon..
#10
Senior Member
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 33,656
Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 2026 Post(s)
Likes: 0
Liked 1,096 Times
in
742 Posts
That's interesting. Mine are painted as you mentioned but I thought RX-100 was a step below 105 in Shimano's pecking order of the time. I'm surprised the RX-100 brakes have a better finish.
#11
Insane Bicycle Mechanic
Join Date: Mar 2008
Location: other Vancouver
Posts: 9,837
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 805 Post(s)
Liked 705 Times
in
377 Posts
Cheaper finish. As far as I can tell they are identical otherwise. I think the pads were cheaper on the RX-100, too: one-piece vs. pad with holder.
__________________
Jeff Wills
Comcast nuked my web page. It will return soon..
Jeff Wills
Comcast nuked my web page. It will return soon..
Thread
Thread Starter
Forum
Replies
Last Post
maartendc
Bicycle Mechanics
11
02-20-18 04:06 PM
striknein
Singlespeed & Fixed Gear
3
06-12-11 11:10 PM