For the love of English 3 speeds...
Senior Member
Join Date: Mar 2018
Location: Brooklyn, NY
Posts: 660
Bikes: 1983 Trek 600, 1972 Raleigh Sports Step Thru, 1963 Rudge Sports, 2007 Dahon MuP8, Dahon Speed, Public Mixte 8-speed IGH, mid-70s Peugeot Mixte AW conversion, Riv Platypus
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 350 Post(s)
Liked 24 Times
in
17 Posts
He's a local and not only was he able to rivet the cover to a new frame (I drilled the cover off the broken frame), he has in the past made new leather covers. But he says that's a lot of work and his costs mean there's no advantage over buying a new saddle. I was able to drop my saddle off and pick it up at his place of business. I don't know how much of this he really wants to do or if he's into shipping. But you can ask. He's RHM on this forum.
Member
Join Date: Jun 2008
Location: Woodland Hills, CA
Posts: 28
Bikes: 1936 Raleigh Sports Tourists, 1952 Raleigh, 1957 Raleigh, 1963 Raleigh Dawn Tourist, 1953 Hercules Tourist, 1953 Hercules Royal Prince, 1953 Hercules Windsor, 1958 Bianchi Sport & 1960 Bianchi Sport
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 25 Post(s)
Liked 9 Times
in
4 Posts
Another Hercules added to my stable!
Hello fellow 3 speeders. Last week I found and purchased a 1953 Hercules Royal Prince, that was only 12 miles away from my home. This is my number 3 of 1953 Hercules that I own. Basically, the bike had good bones, so I went all out on its' rejuvenation. Shown below are the before and after photos of the bike.
Many of the front fork bearings were missing, the front tire and tube had a blow out, the front axel bearing races were pitted, the saddle was made in Taiwon, the hand grips were USA made, The chain had 2 links that were frozen, the rear clamp for the chain guard was missing, one of the pedals dust caps was missing, the kick stand was missing and the complete front brake was missing. Since these early 1950s Hercules are so rare, I had to have it!
I put on new Schwalbe tires/tubes, used original Hercules tan saddle, new matching tan hand grips, used Brooks tan leather tool bag, complete early Hercules front brakes, nice used front axel and bearing races, period correct Midland repainted carrying rack, Miller generator light kit with a stem mounted bracket, NOS Hercules pedals, Raleigh logo kick stand, new indicator chain and its' anchor and all new cables. Coming soon will be reproduction Hercules chainguard sticker, tan pannier bags and matching triangle bag to mount in-between the V portion of the frame.
After1
After2
Many of the front fork bearings were missing, the front tire and tube had a blow out, the front axel bearing races were pitted, the saddle was made in Taiwon, the hand grips were USA made, The chain had 2 links that were frozen, the rear clamp for the chain guard was missing, one of the pedals dust caps was missing, the kick stand was missing and the complete front brake was missing. Since these early 1950s Hercules are so rare, I had to have it!
I put on new Schwalbe tires/tubes, used original Hercules tan saddle, new matching tan hand grips, used Brooks tan leather tool bag, complete early Hercules front brakes, nice used front axel and bearing races, period correct Midland repainted carrying rack, Miller generator light kit with a stem mounted bracket, NOS Hercules pedals, Raleigh logo kick stand, new indicator chain and its' anchor and all new cables. Coming soon will be reproduction Hercules chainguard sticker, tan pannier bags and matching triangle bag to mount in-between the V portion of the frame.
After1
After2
Likes For usarnie1:
Senior Member
Start hitting the cotters with penetrating oil right away. I hope I'm not jinxing myself here, but I have never experienced the trouble with cotters that I've seen other people here have. I'm thinking this may be due to my system of oiling them a few days before I start a BB service. I take the nut and washer off and fill the well with PB Blaster. Only twice did I have cotters bend so badly that I had to drill and drive them out with a hammer and punch. Sometimes the threaded end will bend slightly. In that case I put the nut on, chuck it up in the bench vise and tap it straight again. It used to be a big tragedy if I wrecked a cotter getting it out. Filing those cheap cotters they sell these days to fit and align the crank arms at the same time is a pest. Now, with some Bike Smith cotters on hand, I don't have to worry about that anymore.
Senior Member
Senior Member
Join Date: Jan 2015
Posts: 3,240
Mentioned: 103 Post(s)
Tagged: 0 Thread(s)
Quoted: 1299 Post(s)
Likes: 0
Liked 103 Times
in
85 Posts
Hello fellow 3 speeders. Last week I found and purchased a 1953 Hercules Royal Prince, that was only 12 miles away from my home. This is my number 3 of 1953 Hercules that I own. Basically, the bike had good bones, so I went all out on its' rejuvenation. Shown below are the before and after photos of the bike.
Many of the front fork bearings were missing, the front tire and tube had a blow out, the front axel bearing races were pitted, the saddle was made in Taiwon, the hand grips were USA made, The chain had 2 links that were frozen, the rear clamp for the chain guard was missing, one of the pedals dust caps was missing, the kick stand was missing and the complete front brake was missing. Since these early 1950s Hercules are so rare, I had to have it!
I put on new Schwalbe tires/tubes, used original Hercules tan saddle, new matching tan hand grips, used Brooks tan leather tool bag, complete early Hercules front brakes, nice used front axel and bearing races, period correct Midland repainted carrying rack, Miller generator light kit with a stem mounted bracket, NOS Hercules pedals, Raleigh logo kick stand, new indicator chain and its' anchor and all new cables. Coming soon will be reproduction Hercules chainguard sticker, tan pannier bags and matching triangle bag to mount in-between the V portion of the frame.
After1
After2
Many of the front fork bearings were missing, the front tire and tube had a blow out, the front axel bearing races were pitted, the saddle was made in Taiwon, the hand grips were USA made, The chain had 2 links that were frozen, the rear clamp for the chain guard was missing, one of the pedals dust caps was missing, the kick stand was missing and the complete front brake was missing. Since these early 1950s Hercules are so rare, I had to have it!
I put on new Schwalbe tires/tubes, used original Hercules tan saddle, new matching tan hand grips, used Brooks tan leather tool bag, complete early Hercules front brakes, nice used front axel and bearing races, period correct Midland repainted carrying rack, Miller generator light kit with a stem mounted bracket, NOS Hercules pedals, Raleigh logo kick stand, new indicator chain and its' anchor and all new cables. Coming soon will be reproduction Hercules chainguard sticker, tan pannier bags and matching triangle bag to mount in-between the V portion of the frame.
After1
After2
__________________
Inflate Hard
Inflate Hard
Likes For BigChief:
Senior Member
Join Date: Jun 2019
Location: Portland Oregon
Posts: 996
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 457 Post(s)
Liked 462 Times
in
270 Posts
I'm a little surprised at how rarely this Hercules gets any attention, but, because its not crabon fibre, or titnium, or even hydro formed aluminum, it generally isn't worth a second glance....
I am away from home working in NYC, and I have a sturmey archer folding bike with me, I just put down an hour and a half on the pedals hard, I'd certainly prefer to have my Hercules here, but having a 16" wheeled folder is certainly enough to for me to go turn the cranks hard after work and go to bed happy :-)
OMG, $100?!?!?!? $100 Canadian?!?!? East Idaho craigslist sucks, stuff like this never comes up :-(
Beautiful bike!
Full Member
Join Date: Dec 2011
Location: Canberra Australia
Posts: 240
Bikes: 30's Speedwell Club Racer, 40's Speedwell 'Z' racer, 50's Unknown Aussie with nice lugs, 50's Speedwell Roadster, 50's Repco Roadster, '63 Raleigh DL-1, 70's Raleigh Sprite, Puch Promenade with Nexus 8
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 149 Post(s)
Liked 30 Times
in
23 Posts
Hello fellow 3 speeders. Last week I found and purchased a 1953 Hercules Royal Prince, that was only 12 miles away from my home. This is my number 3 of 1953 Hercules that I own. Basically, the bike had good bones, so I went all out on its' rejuvenation. Shown below are the before and after photos of the bike.
Many of the front fork bearings were missing, the front tire and tube had a blow out, the front axel bearing races were pitted, the saddle was made in Taiwon, the hand grips were USA made, The chain had 2 links that were frozen, the rear clamp for the chain guard was missing, one of the pedals dust caps was missing, the kick stand was missing and the complete front brake was missing. Since these early 1950s Hercules are so rare, I had to have it!
I put on new Schwalbe tires/tubes, used original Hercules tan saddle, new matching tan hand grips, used Brooks tan leather tool bag, complete early Hercules front brakes, nice used front axel and bearing races, period correct Midland repainted carrying rack, Miller generator light kit with a stem mounted bracket, NOS Hercules pedals, Raleigh logo kick stand, new indicator chain and its' anchor and all new cables. Coming soon will be reproduction Hercules chainguard sticker, tan pannier bags and matching triangle bag to mount in-between the V portion of the frame.
Many of the front fork bearings were missing, the front tire and tube had a blow out, the front axel bearing races were pitted, the saddle was made in Taiwon, the hand grips were USA made, The chain had 2 links that were frozen, the rear clamp for the chain guard was missing, one of the pedals dust caps was missing, the kick stand was missing and the complete front brake was missing. Since these early 1950s Hercules are so rare, I had to have it!
I put on new Schwalbe tires/tubes, used original Hercules tan saddle, new matching tan hand grips, used Brooks tan leather tool bag, complete early Hercules front brakes, nice used front axel and bearing races, period correct Midland repainted carrying rack, Miller generator light kit with a stem mounted bracket, NOS Hercules pedals, Raleigh logo kick stand, new indicator chain and its' anchor and all new cables. Coming soon will be reproduction Hercules chainguard sticker, tan pannier bags and matching triangle bag to mount in-between the V portion of the frame.
You really nailed the colour of the Midland rack.
Senior Member
Join Date: Nov 2005
Location: NW Ohio
Posts: 3,418
Bikes: 1984 Miyata 310, 1986 Schwinn Sierra, 2011 Jamis Quest, 1980 Peugeot TH8 Tandem, 1992 Performance Parabola, 1987 Ross Mt. Hood, 1988 Schwinn LeTour, 1988 Trek 400T, 1981 Fuji S12-S LTD, 197? FW Evans
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 530 Post(s)
Liked 1,004 Times
in
514 Posts
I brought this old Hercules back from my dad's yesterday. He got it for $2 at a garage sale several years ago. I am planning to go over it, replace cables and grease bearings, etc. The paint is pretty rough, I'm not sure if it's original or not. The seat and grips were replaced at some point with Dorcy reproduction parts.
1950-something Hercules
Birmingham head badge
Her-cu-matic shifter
1950-something Hercules
Birmingham head badge
Her-cu-matic shifter
Senior Member
Awesome! It looks eager for a clean up. If it has an original shifter, it’s way ahead of the game!
Senior Member
Join Date: Mar 2018
Location: Brooklyn, NY
Posts: 660
Bikes: 1983 Trek 600, 1972 Raleigh Sports Step Thru, 1963 Rudge Sports, 2007 Dahon MuP8, Dahon Speed, Public Mixte 8-speed IGH, mid-70s Peugeot Mixte AW conversion, Riv Platypus
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 350 Post(s)
Liked 24 Times
in
17 Posts
I brought this old Hercules back from my dad's yesterday. He got it for $2 at a garage sale several years ago. I am planning to go over it, replace cables and grease bearings, etc. The paint is pretty rough, I'm not sure if it's original or not. The seat and grips were replaced at some point with Dorcy reproduction parts.
1950-something Hercules
Birmingham head badge
Her-cu-matic shifter
1950-something Hercules
Birmingham head badge
Her-cu-matic shifter
Senior Member
I’m back, had to go for a ride and cool off.
time to upgrade the rims on my Twenty and regrease the BB turned into a bad time. Using a park tool press the NDS pin came right out. The DS did not budge, just bent over and snapped off. Trying to punch it out with no effect. Looks like it is hung up on the slot ledge. Might have to drill. This after soaking in oil too.
moved on, taped new rims to wheels. Started with the front. All went fine but in the end, the CR18 is not even close to the SA rims. Spokes all too loose for a truing. So it looks like spoke calculating time, new spoke/washer time and more cost..,
i’m almost afraid to try and change the 15T cog for a 16T right now. Snap ring might break or fly off who knows where!
Senior Member
Join Date: May 2011
Location: Seattle WA
Posts: 2,841
Bikes: 2009 Handsome Devil, 1987 Trek 520 Cirrus, 1978 Motobecane Grand Touring, 1987 Nishiki Cresta GT, 1989 Specialized Allez Former bikes; 1986 Miyata Trail Runner, 1979 Miyata 912, 2011 VO Rando, 1999 Cannondale R800, 1986 Schwinn Passage
Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 796 Post(s)
Liked 522 Times
in
367 Posts
Start hitting the cotters with penetrating oil right away. I hope I'm not jinxing myself here, but I have never experienced the trouble with cotters that I've seen other people here have. I'm thinking this may be due to my system of oiling them a few days before I start a BB service. I take the nut and washer off and fill the well with PB Blaster. Only twice did I have cotters bend so badly that I had to drill and drive them out with a hammer and punch. Sometimes the threaded end will bend slightly. In that case I put the nut on, chuck it up in the bench vise and tap it straight again. It used to be a big tragedy if I wrecked a cotter getting it out. Filing those cheap cotters they sell these days to fit and align the crank arms at the same time is a pest. Now, with some Bike Smith cotters on hand, I don't have to worry about that anymore.
Senior Member
Join Date: Dec 2005
Location: Ashland, VA
Posts: 4,420
Bikes: The keepers: 1958 Raleigh Lenton Grand Prix, 1968 Ranger, 1969 Magneet Sprint, 1971 Gitane Tour de France, 1973 Raleigh Tourist, 3 - 1986 Rossins, and a '77 PX-10 frame in process.
Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 221 Post(s)
Liked 237 Times
in
129 Posts
I think I paid $150.00 for mine, and it wasn't in quite that nice a shape.
__________________
Syke
“No one in this world, so far as I know — and I have searched the records for years, and employed agents to help me — has ever lost money by underestimating the intelligence of the great masses of the plain people. Nor has anyone ever lost public office thereby.”
H.L. Mencken, (1926)
Syke
“No one in this world, so far as I know — and I have searched the records for years, and employed agents to help me — has ever lost money by underestimating the intelligence of the great masses of the plain people. Nor has anyone ever lost public office thereby.”
H.L. Mencken, (1926)
Senior Member
Join Date: Jun 2019
Location: Portland Oregon
Posts: 996
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 457 Post(s)
Liked 462 Times
in
270 Posts
Bigger hammer? Support the bottom side of the pin with a piece of pipe cut to bear against the ground so when you hit the pin with the hammer all the energy goes into the pin and not into compressing tires and the like?
Senior Member
Join Date: Jan 2015
Posts: 3,240
Mentioned: 103 Post(s)
Tagged: 0 Thread(s)
Quoted: 1299 Post(s)
Likes: 0
Liked 103 Times
in
85 Posts
edit: If you don't already have them, I highly recommend new cotters from Mark at BikeSmith. They are the best quality and he custom tapers them to fit Raleigh cranks. On the good side, if you use good cotters and properly install them with the press, you'll never have this problem again.
__________________
Inflate Hard
Inflate Hard
Last edited by BigChief; 06-19-19 at 03:10 AM.
Senior Member
Join Date: Mar 2018
Location: Brooklyn, NY
Posts: 660
Bikes: 1983 Trek 600, 1972 Raleigh Sports Step Thru, 1963 Rudge Sports, 2007 Dahon MuP8, Dahon Speed, Public Mixte 8-speed IGH, mid-70s Peugeot Mixte AW conversion, Riv Platypus
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 350 Post(s)
Liked 24 Times
in
17 Posts
I’m back, had to go for a ride and cool off.
time to upgrade the rims on my Twenty and regrease the BB turned into a bad time. Using a park tool press the NDS pin came right out. The DS did not budge, just bent over and snapped off. Trying to punch it out with no effect. Looks like it is hung up on the slot ledge. Might have to drill. This after soaking in oil too.
moved on, taped new rims to wheels. Started with the front. All went fine but in the end, the CR18 is not even close to the SA rims. Spokes all too loose for a truing. So it looks like spoke calculating time, new spoke/washer time and more cost..,
i’m almost afraid to try and change the 15T cog for a 16T right now. Snap ring might break or fly off who knows where!
Senior Member
Join Date: May 2018
Location: Ottawa, Ontario, Canada
Posts: 581
Bikes: 1951 Sun Wasp, 1953 Armstrong Consort, 1975 Raleigh Competition, 1980 Apollo Gran Sport, 1988 Schwinn Voyageur, Mystery MTB
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 359 Post(s)
Liked 465 Times
in
191 Posts
Exactly! Although, I do have a punch set and I know most don't. I think they are essential tools. I have never had a cotter break off like that. Usually they just bend. Well, this saves you the trouble of drilling away the bent part. What I do is center punch the cotter, start with a small drill and work up until the drill is almost as big as the diameter of the cotter hole in the crank. This leaves a centered counter sink in the top of the cotter. Then I drill a clearance hole in a 2x4 and cut it to length so it supports the crank arm against the cement floor. Then using the fattest punch that fits into the counter sink, I drive out the cotter. From the looks of it, you may be able to get away with just supporting the crank arm and driving it through. I like the counter sink because it helps direct all the energy straight through the cotter.
edit: If you don't already have them, I highly recommend new cotters from Mark at BikeSmith. They are the best quality and he custom tapers them to fit Raleigh cranks. On the good side, if you use good cotters and properly install them with the press, you'll never have this problem again.
edit: If you don't already have them, I highly recommend new cotters from Mark at BikeSmith. They are the best quality and he custom tapers them to fit Raleigh cranks. On the good side, if you use good cotters and properly install them with the press, you'll never have this problem again.
I've given up working on these without a cotter press. Too much time, too much frustration, too much un-success. Not that I've bought the Bikesmith one. But my LBS has the older Park tool and the proprietor will let me use it if I bring the bike over, which isn't that convenient either. Eventually, I will have to buy the Bikesmith tool, I know that.
The Bikesmith cotter press is essential for a headache free disassembly of old three speeds or any other bike with a cottered crank, like my Peugeot. I was done in two minutes after soaking the cotter pins with PB Blaster and using the press. I could have reused the originals, but I decided to put in the cotters that Mark provided. I'll keep the originals for another day. The quality of the 1950 cotters is impressive considering how long they were in the crank.
Senior Member
Join Date: Jan 2015
Posts: 3,240
Mentioned: 103 Post(s)
Tagged: 0 Thread(s)
Quoted: 1299 Post(s)
Likes: 0
Liked 103 Times
in
85 Posts
Those circlips that hold the cog on the driver are easy to remove. It's getting them back on that's hard for me. I don't even have a good technique to pass along. It's one of those things I just fight with until I win.
__________________
Inflate Hard
Inflate Hard
Senior Member
Join Date: Mar 2012
Location: Baltimore, MD
Posts: 536
Bikes: Vilano Urbana, DownTube FS9, Montaque paratrooper, Nano mini-velo, Motobecane CX, Raleigh 20, MIFA folder, ROG Pony, Iverson Grand Touring folder, Exclusiv German folder
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 168 Post(s)
Liked 191 Times
in
119 Posts
Free Raleigh Three Speed, DC area
https://washingtondc.craigslist.org/...910311657.html
FREE Curb Alert
Bike is FREE! if not gone by Thursday AM, the rubbish men will take it off.
1960s black Raleigh bike with mechanical lever/rod brakes
I put the bike on the curb.
Three speed rear hub.
Parked in shed for the last 40 years.
Hole drilled in frame near the "R" in Raleigh, see pic.
No seat, no fenders, no chain guard
FREE at the curb waiting pickup.
https://washingtondc.craigslist.org/...910311657.html
FREE Curb Alert
Bike is FREE! if not gone by Thursday AM, the rubbish men will take it off.
1960s black Raleigh bike with mechanical lever/rod brakes
I put the bike on the curb.
Three speed rear hub.
Parked in shed for the last 40 years.
Hole drilled in frame near the "R" in Raleigh, see pic.
No seat, no fenders, no chain guard
FREE at the curb waiting pickup.
Likes For mirfi:
Senior Member
Thanks all! Right now I am ready to drill the counter hole for the punch. Might get a bigger one from my friend to use. Already have the 2/4 with the hole drilled into it. Still loading it up with tri flow and Phil’s.
i’m more upset about the rims not working with the spokes. More downtime for my poor Twenty.
i’m more upset about the rims not working with the spokes. More downtime for my poor Twenty.
Senior Member
Join Date: Jun 2017
Posts: 920
Bikes: Diamond Back Apex, Mongoose IBOC Aluminum Road Bike, SR road bike
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 515 Post(s)
Liked 167 Times
in
116 Posts
Free Raleigh Three Speed, DC area
https://washingtondc.craigslist.org/...910311657.html
FREE Curb Alert
Bike is FREE! if not gone by Thursday AM, the rubbish men will take it off.
1960s black Raleigh bike with mechanical lever/rod brakes
I put the bike on the curb.
Three speed rear hub.
Parked in shed for the last 40 years.
Hole drilled in frame near the "R" in Raleigh, see pic.
No seat, no fenders, no chain guard
FREE at the curb waiting pickup.
https://washingtondc.craigslist.org/...910311657.html
FREE Curb Alert
Bike is FREE! if not gone by Thursday AM, the rubbish men will take it off.
1960s black Raleigh bike with mechanical lever/rod brakes
I put the bike on the curb.
Three speed rear hub.
Parked in shed for the last 40 years.
Hole drilled in frame near the "R" in Raleigh, see pic.
No seat, no fenders, no chain guard
FREE at the curb waiting pickup.
Senior Member
Join Date: Mar 2013
Location: Maryland
Posts: 3,799
Bikes: Lots of English 3-speeds, a couple of old road bikes, 3 mountain bikes, 1 hybrid, and a couple of mash-ups
Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 887 Post(s)
Liked 335 Times
in
225 Posts
Free Raleigh Three Speed, DC area
https://washingtondc.craigslist.org/...910311657.html
FREE Curb Alert
Bike is FREE! if not gone by Thursday AM, the rubbish men will take it off.
1960s black Raleigh bike with mechanical lever/rod brakes
I put the bike on the curb.
Three speed rear hub.
Parked in shed for the last 40 years.
Hole drilled in frame near the "R" in Raleigh, see pic.
No seat, no fenders, no chain guard
FREE at the curb waiting pickup.
https://washingtondc.craigslist.org/...910311657.html
FREE Curb Alert
Bike is FREE! if not gone by Thursday AM, the rubbish men will take it off.
1960s black Raleigh bike with mechanical lever/rod brakes
I put the bike on the curb.
Three speed rear hub.
Parked in shed for the last 40 years.
Hole drilled in frame near the "R" in Raleigh, see pic.
No seat, no fenders, no chain guard
FREE at the curb waiting pickup.
Senior Member
Little oil, drill, punch and repeat.
All nice and clean!
Still ready to do the job after 40 years!
Success! Fighting all the way but the cotter finally came out. All BB parts shiny and free of wear. I found chunks of old grease and a petrified wasp but no sock. The Teflon spray was helping it but new grease is what it needs.
The drill bit stayed mostly in the pin but towards the bottom drifted out into the crank. I can see a little divot out of the wall. Both openings are still round. I will be getting new pins, most likely from Mark.
Senior Member
Join Date: Mar 2012
Location: Baltimore, MD
Posts: 536
Bikes: Vilano Urbana, DownTube FS9, Montaque paratrooper, Nano mini-velo, Motobecane CX, Raleigh 20, MIFA folder, ROG Pony, Iverson Grand Touring folder, Exclusiv German folder
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 168 Post(s)
Liked 191 Times
in
119 Posts
I was wondering who I know in the area that could pick it up for me.. But I don't know anybody that lives on that side of DC.