Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

External ”Hollowtech” bearings or square tapered cartridges?

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

External ”Hollowtech” bearings or square tapered cartridges?

Old 12-01-19, 04:15 PM
  #1  
dwsmartins
Member
Thread Starter
 
Join Date: Oct 2018
Posts: 45
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Liked 8 Times in 7 Posts
External ”Hollowtech” bearings or square tapered cartridges?

Hi everyone!

As the title says, but I’m thinking about the durability factor.

A crankset/bottom bracket similar to my actual ones (currently SunRace FCM918 with Shimano UN-BB26, looking for a Shimano FC-T4060 with Shimano BB-SM52) is about 2.5x more expensive here in Brazil. Is it at least as durable as it costs?
dwsmartins is offline  
Old 12-01-19, 04:20 PM
  #2  
berner
Senior Member
 
Join Date: May 2010
Location: Bristol, R. I.
Posts: 3,766

Bikes: Specialized Secteur, old Peugeot

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 422 Post(s)
Liked 150 Times in 106 Posts
I like that Hollowtech is easy to take apart for cleaning so ti gets cleaned.
berner is online now  
Old 12-01-19, 04:32 PM
  #3  
dedhed
SE Wis
 
dedhed's Avatar
 
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 5,685

Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400

Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 904 Post(s)
Liked 252 Times in 192 Posts
Well, I've replaced a cheap cartridge (Chin Heur) after a few K miles with a UN55 that probably has 5K miles on it and running fine. I probably have 10K on an 105 BB5600 HTII bottom bracket that is running fine.

Either one should give years/miles of trouble free service unless you're riding in very extreme conditions.

I would forget the UN 26 and step up to a UN 55 for a few more $$
dedhed is online now  
Likes For dedhed:
Old 12-01-19, 04:33 PM
  #4  
AnkleWork
Senior Member
 
Join Date: Jan 2013
Location: Llano Estacado
Posts: 3,655

Bikes: old clunker

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 655 Post(s)
Likes: 0
Liked 82 Times in 64 Posts
Originally Posted by dwsmartins View Post
Hi everyone!

As the title says, but I’m thinking about the durability factor.

A crankset/bottom bracket similar to my actual ones (currently SunRace FCM918 with Shimano UN-BB26, looking for a Shimano FC-T4060 with Shimano BB-SM52) is about 2.5x more expensive here in Brazil. Is it at least as durable as it costs?
If you would post in your native language then respondents could understand you better and you would receive more useful replies.
AnkleWork is offline  
Likes For AnkleWork:
Old 12-01-19, 04:34 PM
  #5  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 12,528

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Raleigh Pro, Trek Cycle Cross, Mongoose tomac ATB, GT Bravado ATB, JCP Folder

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2041 Post(s)
Liked 197 Times in 157 Posts
For the numbers of external to shell bearings (Hollowtech) sold and their relative mid to better grades (as they are on more expensive bikes typically) I will say that we replace a lot. For the most part these are not really rebuildable and are regarded as disposable by the industry.

The tapered square BBs seem to be of better sealing in general and don't wear as rapidly. Especially since they are so much more common at the lower cost levels one might think their longevity should be less then external units. But our experience doesn't prove this assumption out.

I'm sure others will have their opinions, perhaps they can offer some ideas as to how many they see a year so we know the foundation their opinions are based on. Andy
__________________
AndrewRStewart
Andrew R Stewart is offline  
Likes For Andrew R Stewart:
Old 12-01-19, 05:17 PM
  #6  
dedhed
SE Wis
 
dedhed's Avatar
 
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 5,685

Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400

Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 904 Post(s)
Liked 252 Times in 192 Posts
Originally Posted by AnkleWork View Post
If you would post in your native language then respondents could understand you better and you would receive more useful replies.
Just curious, How do you know what their native language is?
dedhed is online now  
Likes For dedhed:
Old 12-01-19, 06:17 PM
  #7  
wgscott
Occam's Rotor
 
wgscott's Avatar
 
Join Date: Jul 2013
Posts: 5,140
Mentioned: 61 Post(s)
Tagged: 0 Thread(s)
Quoted: 2366 Post(s)
Liked 362 Times in 220 Posts
After faffing around with a White Industries square taper BB (a good, but rather expensive one) for a couple of years, I went back to the $18 Shimano Ultegra BB, and it felt the way it does when I stop hitting myself in the head with a hammer.

@Andrew R Stewart: sample size = 1.0

Edit: I just remembered my Crampy square taper BB survived about 35 years of malignant neglect.

Last edited by wgscott; 12-01-19 at 07:36 PM.
wgscott is offline  
Likes For wgscott:
Old 12-01-19, 06:35 PM
  #8  
DrIsotope
Non omnino gravis
 
DrIsotope's Avatar
 
Join Date: Feb 2015
Location: SoCal, USA!
Posts: 7,621

Bikes: Nekobasu, Pandicorn

Mentioned: 114 Post(s)
Tagged: 0 Thread(s)
Quoted: 4227 Post(s)
Liked 735 Times in 443 Posts
I have a Shimano SM-BBR60 here with +15k miles on it, installed on it's third frame. Bearings are still smooth.

And even though no one asked, a BB-UN26 square-taper is 355g, while the aforementioned BBR60 is 77 grams. That's over half a pound.
__________________
DrIsotope is offline  
Likes For DrIsotope:
Old 12-01-19, 06:49 PM
  #9  
ThermionicScott 
7-speed cultist
 
ThermionicScott's Avatar
 
Join Date: Aug 2011
Location: CID
Posts: 19,719

Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers)

Mentioned: 83 Post(s)
Tagged: 0 Thread(s)
Quoted: 2601 Post(s)
Liked 492 Times in 355 Posts
Originally Posted by AnkleWork View Post
If you would post in your native language then respondents could understand you better and you would receive more useful replies.
Not sure what your problem is, but everyone else understood it just fine.
__________________
Originally Posted by chandltp View Post
There's no such thing as too far.. just lack of time
Originally Posted by noglider
People in this forum are not typical.
RUSA #7498
ThermionicScott is offline  
Likes For ThermionicScott:
Old 12-01-19, 06:56 PM
  #10  
Steve B.
Senior Member
 
Join Date: Jul 2007
Location: South shore, L.I., NY
Posts: 3,755

Bikes: Flyxii FR322, Cannondale Topstone, Miyata City Liner, Specialized Chisel

Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1342 Post(s)
Liked 145 Times in 113 Posts
I’ve multiple thousands of miles on Ultegra and 105 level HollowTech b-brackets. They are easy to install, the spacing is dead on with the matched derailer so the shifting is easier to setup and are generally a ton easier to install and/or service than a square taper.
Steve B. is offline  
Likes For Steve B.:
Old 12-01-19, 07:04 PM
  #11  
'02 nrs 
royaloaker
 
'02 nrs's Avatar
 
Join Date: Jan 2010
Location: se MIch.
Posts: 193

Bikes: 1938 claud butler,1983 Basso,teledyne titan,teocali super,nrs,1993 stumpjumper fsr,Paramountain,Paramount Buell,4 banger,Zaskar LE,Colnago Master Ibex MTB,1987ish,.etc....

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 70 Post(s)
Liked 60 Times in 35 Posts
Originally Posted by ThermionicScott View Post
Not sure what your problem is, but everyone else understood it just fine.
maybe a Russian troll spreading negativism prior to the elections???
'02 nrs is offline  
Likes For '02 nrs:
Old 12-01-19, 07:10 PM
  #12  
mpetry912 
aged to perfection
 
mpetry912's Avatar
 
Join Date: Jun 2009
Location: PacNW
Posts: 432

Bikes: Dinucci Allez 2.0, Richard Sachs, Alex Singer, Serotta, Masi GC, Raleigh Pro Mk.1, Hetchins, etc

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 190 Post(s)
Liked 106 Times in 77 Posts
I'm with Andrew the external bearings, while they brace the BB spindle better, seem to have a shorter life.

It may be because they are not as well protected, particularly from front wheel splash in wet conditions.

Mark Petry
Bainbridge Island, WA USA
mpetry912 is offline  
Likes For mpetry912:
Old 12-01-19, 07:26 PM
  #13  
HillRider
Senior Member
 
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 31,838

Bikes: '''96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '12 Surly Pacer, All are 3x8,9 or 10. It is hilly around here!

Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 1290 Post(s)
Likes: 0
Liked 109 Times in 92 Posts
My experience with Shimano HTII external bottom brackets has been very good. I have two BB6700 (Ultegra level) bottom brackets mounting FC-5703 (105 level) triple cranks with over 25,000 miles each and still in excellent operating condition. These bikes aren't ridden in rain or snow if I can help it but they have gotten wet and splashed a number of times with no apparent problems.

Sample size = 2 but success = 100%
HillRider is offline  
Likes For HillRider:
Old 12-01-19, 07:30 PM
  #14  
dsbrantjr
Senior Member
 
dsbrantjr's Avatar
 
Join Date: Sep 2010
Location: Roswell, GA
Posts: 6,713

Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 849 Post(s)
Liked 181 Times in 148 Posts
Originally Posted by DrIsotope View Post
I have a Shimano SM-BBR60 here with +15k miles on it, installed on it's third frame. Bearings are still smooth.

And even though no one asked, a BB-UN26 square-taper is 355g, while the aforementioned BBR60 is 77 grams. That's over half a pound.
To make a fair comparison you would have to include the weight of the spindle, which the BBR60 does not have but which is part of the BB-UN26.
dsbrantjr is offline  
Likes For dsbrantjr:
Old 12-01-19, 07:47 PM
  #15  
Marcus_Ti 
Frozen Solid.
 
Marcus_Ti's Avatar
 
Join Date: Sep 2014
Location: Lincoln, Nebraska
Posts: 5,030

Bikes: Roadie: Seven Axiom Race Ti w/Chorus 11s. CX/Adventure: Carver Gravel Grinder w/ Di2

Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 2161 Post(s)
Liked 179 Times in 120 Posts
Originally Posted by wgscott View Post
After faffing around with a White Industries square taper BB (a good, but rather expensive one) for a couple of years, I went back to the $18 Shimano Ultegra BB, and it felt the way it does when I stop hitting myself in the head with a hammer.

@Andrew R Stewart: sample size = 1.0

Edit: I just remembered my Crampy square taper BB survived about 35 years of malignant neglect.
Not all those Campag sq tapers were created equal....the worse are Campagnolo AC-H units, they go to gravel inside fast. Just junk. Then again AC-H was the cheaper Campag.
Marcus_Ti is online now  
Likes For Marcus_Ti:
Old 12-01-19, 07:48 PM
  #16  
DrIsotope
Non omnino gravis
 
DrIsotope's Avatar
 
Join Date: Feb 2015
Location: SoCal, USA!
Posts: 7,621

Bikes: Nekobasu, Pandicorn

Mentioned: 114 Post(s)
Tagged: 0 Thread(s)
Quoted: 4227 Post(s)
Liked 735 Times in 443 Posts
Originally Posted by dsbrantjr View Post
To make a fair comparison you would have to include the weight of the spindle, which the BBR60 does not have but which is part of the BB-UN26.
An era-appropriate square-taper crankset, like an Ultegra 6500 or DuraAce 7400, would both be 650-670g including fixing bolts. An Ultegra 6800 is 677g, and a DuraAce 9000 is 615g. The net savings is well over 300g.

Even an economy crankset today will be at or under 800g, which with a ~80g BB is still lighter than a higher-end square taper crankset from 20 years ago.
__________________
DrIsotope is offline  
Likes For DrIsotope:
Old 12-01-19, 08:31 PM
  #17  
tyrion
Senior Member
 
tyrion's Avatar
 
Join Date: Oct 2015
Location: San Diego, California
Posts: 2,590

Bikes: Breezer Radar

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 1384 Post(s)
Liked 271 Times in 158 Posts
Hambini says a poorly aligned BB shell will cause premature bearing wear. Does a square taper cartridge unit isolate from those imperfections?
tyrion is offline  
Likes For tyrion:
Old 12-01-19, 09:36 PM
  #18  
Andrew R Stewart 
Senior Member
 
Andrew R Stewart's Avatar
 
Join Date: Feb 2012
Location: Rochester, NY
Posts: 12,528

Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Raleigh Pro, Trek Cycle Cross, Mongoose tomac ATB, GT Bravado ATB, JCP Folder

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2041 Post(s)
Liked 197 Times in 157 Posts
Originally Posted by tyrion View Post
Hambini says a poorly aligned BB shell will cause premature bearing wear. Does a square taper cartridge unit isolate from those imperfections?
To a degree yes. However the shell faces are also about getting the BB (whatever type) securely tightened. A shell with cockeyed faces won't allow the BB RH (usually the RH) side to fully snug up and thus might loosen during use more readily. The other possibility with really off faces is that if the BB cartridge is fully torqued down before the LH locating ring (what most will call a cup even though it's a cylinder) the LH end can drift off center and make installing that LH ring rather hard. This is one reason why I'll not tighten the RH side completely before the LH side is installed. Andy
__________________
AndrewRStewart
Andrew R Stewart is offline  
Likes For Andrew R Stewart:
Old 12-02-19, 02:19 AM
  #19  
dwsmartins
Member
Thread Starter
 
Join Date: Oct 2018
Posts: 45
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Liked 8 Times in 7 Posts
Thanks everyone for the quick answers! I’ll try to answer each one individually.
dwsmartins is offline  
Old 12-02-19, 02:31 AM
  #20  
dwsmartins
Member
Thread Starter
 
Join Date: Oct 2018
Posts: 45
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Liked 8 Times in 7 Posts
Originally Posted by berner View Post
I like that Hollowtech is easy to take apart for cleaning so ti gets cleaned.
Square tapered can’t be taken apart for cleaning, but they look more sealed too. The square BB I’m replacing is 10-year old with about 12000km on it and has no contamination visible, even after breaking it apart.

The reason I’m replacing it is because it’s got some play and misalignment. As I’m still overweight, with 114kg (down from 157kg, all 43kg lost on this BB), I’d thought about upgrading to Hollowtech, if the durability factor worth it.
dwsmartins is offline  
Old 12-02-19, 02:35 AM
  #21  
dwsmartins
Member
Thread Starter
 
Join Date: Oct 2018
Posts: 45
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Liked 8 Times in 7 Posts
Originally Posted by dedhed View Post
Well, I've replaced a cheap cartridge (Chin Heur) after a few K miles with a UN55 that probably has 5K miles on it and running fine. I probably have 10K on an 105 BB5600 HTII bottom bracket that is running fine.

Either one should give years/miles of trouble free service unless you're riding in very extreme conditions.

I would forget the UN 26 and step up to a UN 55 for a few more $$
Unfortunately, UN55 isn’t available here. Also, I’ve only found SM-BB52 Hollowtech, so my choices are limited.

I don’t ride extreme, but I guess my weight still makes it kinda “extreme-y”, so to speak...
dwsmartins is offline  
Old 12-02-19, 02:51 AM
  #22  
dwsmartins
Member
Thread Starter
 
Join Date: Oct 2018
Posts: 45
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Liked 8 Times in 7 Posts
Originally Posted by AnkleWork View Post
If you would post in your native language then respondents could understand you better and you would receive more useful replies.
I’d already posted on local sites/forums and, despite some useful replies, most of it was like “Hollowtech is better because it’s newer” or so.

BikeForums’s users have my respect on this regard, as I always got useful answers. That’s probably due to a broader audience, and to reach everyone the common ground is English, so be it.

Please, don’t read that in a rough tone, that’s not my intention. I just couldn’t think of a better way to write it.
dwsmartins is offline  
Likes For dwsmartins:
Old 12-02-19, 03:14 AM
  #23  
dwsmartins
Member
Thread Starter
 
Join Date: Oct 2018
Posts: 45
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Liked 8 Times in 7 Posts
Originally Posted by Andrew R Stewart View Post
For the numbers of external to shell bearings (Hollowtech) sold and their relative mid to better grades (as they are on more expensive bikes typically) I will say that we replace a lot. For the most part these are not really rebuildable and are regarded as disposable by the industry.

The tapered square BBs seem to be of better sealing in general and don't wear as rapidly. Especially since they are so much more common at the lower cost levels one might think their longevity should be less then external units. But our experience doesn't prove this assumption out.

I'm sure others will have their opinions, perhaps they can offer some ideas as to how many they see a year so we know the foundation their opinions are based on. Andy
Thanks for your advice! That’s exactly what I’m looking for. Now let’s look for a Hollowtech opinion...
dwsmartins is offline  
Old 12-02-19, 03:18 AM
  #24  
dwsmartins
Member
Thread Starter
 
Join Date: Oct 2018
Posts: 45
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Liked 8 Times in 7 Posts
Originally Posted by dedhed View Post
Just curious, How do you know what their native language is?
I’ve told I’m from Brazil on the first post. But please, I don’t speak “brazilian” (or spanish, for that matter): we speak portuguese here. 😁
dwsmartins is offline  
Likes For dwsmartins:
Old 12-02-19, 03:20 AM
  #25  
dwsmartins
Member
Thread Starter
 
Join Date: Oct 2018
Posts: 45
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 11 Post(s)
Liked 8 Times in 7 Posts
Originally Posted by wgscott View Post
After faffing around with a White Industries square taper BB (a good, but rather expensive one) for a couple of years, I went back to the $18 Shimano Ultegra BB, and it felt the way it does when I stop hitting myself in the head with a hammer.

@Andrew R Stewart: sample size = 1.0

Edit: I just remembered my Crampy square taper BB survived about 35 years of malignant neglect.
Geez.. 35 years? My old Shimano UN26 survived “just” 10 years and I’m already thinking that’s a lot!
dwsmartins is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information

Copyright © 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.