Totally Tubular
#1451
Junior Member
Your comment had me puzzled, and I'm like, "what am I missing?". Scrolled back through much earlier posts in this thread and you know, prior to browsing through the thread a bit more, well I honestly thought tubular tires were the floppy, non-wire bead, type.. But now I'm looking through this, and can safely attest that I have never seen one of these funky looking tire-tube combo "tubular tire" affairs in person in my entire life.
Likes For game_player_s:
#1452
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,327
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3898 Post(s)
Liked 4,830 Times
in
2,228 Posts
Your comment had me puzzled, and I'm like, "what am I missing?". Scrolled back through much earlier posts in this thread and you know, prior to browsing through the thread a bit more, well I honestly thought tubular tires were the floppy, non-wire bead, type.. But now I'm looking through this, and can safely attest that I have never seen one of these funky looking tire-tube combo "tubular tire" affairs in person in my entire life.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
#1453
It's MY mountain
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 10,002
Bikes: Klein, Merckx, Trek
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 4337 Post(s)
Liked 2,980 Times
in
1,617 Posts
#1454
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,327
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3898 Post(s)
Liked 4,830 Times
in
2,228 Posts
I have to laugh.
True story -
Was in a rather large, familiar bike shop a few months back and noticed a new poster w/ a lot of writing on the walls (at eye level) in several spots - two in the tire section. It was a detailed poster showing (almost) all the tire sizes and the various nomenclatures for each. Only a couple of images for reference.
Upon checking out I said to the store-manager-looking-guy, "Thanks for trying to keep all us dumb customers clear about the tire sizes we need?" He replied, "Training tool for new employees!" He paused, then mumbled audibly, "and translation guide for the experienced ones." I could only chuckle and reply, "me too, thankfully tubulars are one diameter". Then he said, "We need a bigger one (chart) for wheels and all brake combos".
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
Last edited by Wildwood; 04-09-20 at 10:24 PM.
#1455
It's MY mountain
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 10,002
Bikes: Klein, Merckx, Trek
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 4337 Post(s)
Liked 2,980 Times
in
1,617 Posts
I had to put my clincher wheels on the vintage bike last week after this terminal tire cut. I've got a half-dozen nice tubulars hanging in the garage but I'm about ready to switch to my summer bike and hang this one up for the season.
Latex tube, slow leak, Stan's didn't stop it.
Latex tube, slow leak, Stan's didn't stop it.
#1456
Freewheel Medic
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 12,882
Bikes: Snazzy* Schwinns, Classy Cannondales & a Super Pro Aero Lotus (* Ed.)
Mentioned: 140 Post(s)
Tagged: 0 Thread(s)
Quoted: 1452 Post(s)
Liked 2,194 Times
in
962 Posts
Last year I spotted a set of mid-90s Mavic Cosmic wheels on CL (8-10 speed freehub). While not vintage they'd make a nice upgrade for my '93 R500 Cannondale and the price was less than $100. I couldn't tell from the picture as to whether they were clinchers or tubulars, so I asked in an email, "Are the rims for clincher tires or tubular tires?" The answer came back, "I used these on my Tri-Bike and they are tubulars."
So I drove the 1.5 hours to pick them up, excited that I found such a nice set of modern tubular wheels for my C-Dale! As soon as the seller brought them out from the garage, and without me even holding them, I said, politely, "Wow! Those are nice looking wheels, but those are clincher rims with clincher tires." The owner, who was a professor at a nearby state university, assured me, "Oh, no! This is a tubular wheelset. One of the best you could buy in the 90s!"
Well, I bought them anyway. For $75 I felt it was a good purchase. I departed without deflating the tire to reveal the bead nor did I pull up an image of tubular on my phone. The good professor continues to live in his tubular ignorance!
So I drove the 1.5 hours to pick them up, excited that I found such a nice set of modern tubular wheels for my C-Dale! As soon as the seller brought them out from the garage, and without me even holding them, I said, politely, "Wow! Those are nice looking wheels, but those are clincher rims with clincher tires." The owner, who was a professor at a nearby state university, assured me, "Oh, no! This is a tubular wheelset. One of the best you could buy in the 90s!"
Well, I bought them anyway. For $75 I felt it was a good purchase. I departed without deflating the tire to reveal the bead nor did I pull up an image of tubular on my phone. The good professor continues to live in his tubular ignorance!
__________________
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
#1457
What??? Only 2 wheels?
Join Date: Apr 2010
Location: Boston-ish, MA
Posts: 13,434
Bikes: 72 Peugeot UO-8, 82 Peugeot TH8, 87 Bianchi Brava, 76? Masi Grand Criterium, 74 Motobecane Champion Team, 86 & 77 Gazelle champion mondial, 81? Grandis, 82? Tommasini, 83 Peugeot PF10
Mentioned: 189 Post(s)
Tagged: 0 Thread(s)
Quoted: 1222 Post(s)
Liked 645 Times
in
232 Posts
Likes For jimmuller:
#1458
Junior Member
I loved the "TUBES" Smash or Trash Album circa 82 maybe........
#1459
Senior Member
Join Date: Oct 2016
Location: Cambridge UK
Posts: 852
Bikes: 1903 24 spd Sunbeam, 1927 Humber, 3 1930 Raleighs, 2 1940s Sunbeams, 2 1940s Raleighs, Rudge, 1950s Robin Hood, 1958 Claud Butler, 2 1973 Colnago Supers, Eddie Merckx, 2 1980 Holdsworth, EG Bates funny TT bike, another 6 or so 1990s bikes
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 331 Post(s)
Liked 332 Times
in
185 Posts
#1461
Senior Member
Last year I spotted a set of mid-90s Mavic Cosmic wheels on CL (8-10 speed freehub). While not vintage they'd make a nice upgrade for my '93 R500 Cannondale and the price was less than $100. I couldn't tell from the picture as to whether they were clinchers or tubulars, so I asked in an email, "Are the rims for clincher tires or tubular tires?" The answer came back, "I used these on my Tri-Bike and they are tubulars."
So I drove the 1.5 hours to pick them up, excited that I found such a nice set of modern tubular wheels for my C-Dale! As soon as the seller brought them out from the garage, and without me even holding them, I said, politely, "Wow! Those are nice looking wheels, but those are clincher rims with clincher tires." The owner, who was a professor at a nearby state university, assured me, "Oh, no! This is a tubular wheelset. One of the best you could buy in the 90s!"
Well, I bought them anyway. For $75 I felt it was a good purchase. I departed without deflating the tire to reveal the bead nor did I pull up an image of tubular on my phone. The good professor continues to live in his tubular ignorance!
So I drove the 1.5 hours to pick them up, excited that I found such a nice set of modern tubular wheels for my C-Dale! As soon as the seller brought them out from the garage, and without me even holding them, I said, politely, "Wow! Those are nice looking wheels, but those are clincher rims with clincher tires." The owner, who was a professor at a nearby state university, assured me, "Oh, no! This is a tubular wheelset. One of the best you could buy in the 90s!"
Well, I bought them anyway. For $75 I felt it was a good purchase. I departed without deflating the tire to reveal the bead nor did I pull up an image of tubular on my phone. The good professor continues to live in his tubular ignorance!
#1462
Freewheel Medic
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 12,882
Bikes: Snazzy* Schwinns, Classy Cannondales & a Super Pro Aero Lotus (* Ed.)
Mentioned: 140 Post(s)
Tagged: 0 Thread(s)
Quoted: 1452 Post(s)
Liked 2,194 Times
in
962 Posts
Maybe!
__________________
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
#1463
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,327
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3898 Post(s)
Liked 4,830 Times
in
2,228 Posts
If I can't fit or remove a tire with my hands and a basic lever, then that tire or rim will be gone before the bike's next ride. I can't be fished into having a tool for every non-toleranced component. If my finger/hand strength fails me, then OK. and thanks for the recommendation.
this is a clincher tire tool, another very good reason for tubulars!!!
this is a clincher tire tool, another very good reason for tubulars!!!
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
Likes For Wildwood:
#1464
What??? Only 2 wheels?
Join Date: Apr 2010
Location: Boston-ish, MA
Posts: 13,434
Bikes: 72 Peugeot UO-8, 82 Peugeot TH8, 87 Bianchi Brava, 76? Masi Grand Criterium, 74 Motobecane Champion Team, 86 & 77 Gazelle champion mondial, 81? Grandis, 82? Tommasini, 83 Peugeot PF10
Mentioned: 189 Post(s)
Tagged: 0 Thread(s)
Quoted: 1222 Post(s)
Liked 645 Times
in
232 Posts
There be some superb "toleranced" tires which are tight on some superb "toleranced" rims. The tires eventually loosen up to what some people would consider normal, but even so, a tool like that is a wonderful thing to have handy. Plus they make pinch flats from tire irons nearly non-existent.
__________________
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
#1465
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,327
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3898 Post(s)
Liked 4,830 Times
in
2,228 Posts
I can buy into everything you say - but to what good purpose? Making ill-fitting combinations of tires& rims fit? Balderdash!!!
Find me a proper fitting tire for this rim/wheelset. Please! A sturdy, touring rim. Maybe this 700c DOES fit 27” tires. Haven’t tried that.
Find me a proper fitting tire for this rim/wheelset. Please! A sturdy, touring rim. Maybe this 700c DOES fit 27” tires. Haven’t tried that.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
#1466
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,842
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2337 Post(s)
Liked 2,820 Times
in
1,540 Posts
had those rims on the torpado i used to have..... diidn't have any problems with 700c tires.....don't remember brand/model..... but I have had tires that took a tire jack to get on.....if that happens, let them sit for a few days and then do a simulated flat on the road and if I can't get them off easily, then put differnt tires on
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
#1467
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,327
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3898 Post(s)
Liked 4,830 Times
in
2,228 Posts
had those rims on the torpado i used to have..... diidn't have any problems with 700c tires.....don't remember brand/model..... but I have had tires that took a tire jack to get on.....if that happens, let them sit for a few days and then do a simulated flat on the road and if I can't get them off easily, then put differnt tires on
...but, but, but.....
this is the Totally Tubular thread.
I see no further point in clincher problem-fixing with kludge (but effective) solutions.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
#1468
It's MY mountain
Join Date: Sep 2006
Location: Mt.Diablo
Posts: 10,002
Bikes: Klein, Merckx, Trek
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 4337 Post(s)
Liked 2,980 Times
in
1,617 Posts
Yeah, and now it's a sticky thread too!
BTW, tubulars fit just fine on 700c clincher rims for stretching purposes. I don't keep my worn out tubular rims but I always have a spare clincher wheel hanging from the rafters for stretching tubulars, and clinchers, and for QC on patched tubes.
BTW, tubulars fit just fine on 700c clincher rims for stretching purposes. I don't keep my worn out tubular rims but I always have a spare clincher wheel hanging from the rafters for stretching tubulars, and clinchers, and for QC on patched tubes.
#1469
What??? Only 2 wheels?
Join Date: Apr 2010
Location: Boston-ish, MA
Posts: 13,434
Bikes: 72 Peugeot UO-8, 82 Peugeot TH8, 87 Bianchi Brava, 76? Masi Grand Criterium, 74 Motobecane Champion Team, 86 & 77 Gazelle champion mondial, 81? Grandis, 82? Tommasini, 83 Peugeot PF10
Mentioned: 189 Post(s)
Tagged: 0 Thread(s)
Quoted: 1222 Post(s)
Liked 645 Times
in
232 Posts
Tubulars fit on a 700c clincher rim well enough to ride when the situation requires it. I mentioned this in a different thread (I think) a few years ago, but I'll mention it again. I was commuting home one afternoon and came upon another cyclist stopped with a flat on the rear. He was trying to flag down a car but it was a bad location where, to put it mildly, ain't nobody gonna' stop there. He had no spare or patch kit, apparently had considered neither the possibility of a flat nor many of the other practicalities of riding. He was hoping to get to a bike shop just a few miles away, an easy ride and mostly significantly downhill. I had a spare tubular so I mounted in on his clincher rim, pumped it up to a reasonable pressure, warned him not to corner or brake too hard, and followed him to the bike shop where he gave me my tire back. Since then I've usually carried a patch kit on my tubular-tired bikes. It's kinda' like carrying a flashlight on a sunny day but you never know when you might meet someone who's still in the dark.
__________________
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
Likes For jimmuller:
#1470
Senior Member
Join Date: Jun 2014
Location: Ontario, Canada
Posts: 4,624
Bikes: iele Latina, Miele Suprema, Miele Uno LS, Miele Miele Beta, MMTB, Bianchi Model Unknown, Fiori Venezia, Fiori Napoli, VeloSport Adamas AX
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1324 Post(s)
Liked 927 Times
in
640 Posts
Good point, never tried it though because I've always had a spare tubular rim sitting around.
Tubulars fit on a 700c clincher rim well enough to ride when the situation requires it. I mentioned this in a different thread (I think) a few years ago, but I'll mention it again. I was commuting home one afternoon and came upon another cyclist stopped with a flat on the rear. He was trying to flag down a car but it was a bad location where, to put it mildly, ain't nobody gonna' stop there. He had no spare or patch kit, apparently had considered neither the possibility of a flat nor many of the other practicalities of riding. He was hoping to get to a bike shop just a few miles away, an easy ride and mostly significantly downhill. I had a spare tubular so I mounted in on his clincher rim, pumped it up to a reasonable pressure, warned him not to corner or brake too hard, and followed him to the bike shop where he gave me my tire back. Since then I've usually carried a patch kit on my tubular-tired bikes. It's kinda' like carrying a flashlight on a sunny day but you never know when you might meet someone who's still in the dark.
Tubulars fit on a 700c clincher rim well enough to ride when the situation requires it. I mentioned this in a different thread (I think) a few years ago, but I'll mention it again. I was commuting home one afternoon and came upon another cyclist stopped with a flat on the rear. He was trying to flag down a car but it was a bad location where, to put it mildly, ain't nobody gonna' stop there. He had no spare or patch kit, apparently had considered neither the possibility of a flat nor many of the other practicalities of riding. He was hoping to get to a bike shop just a few miles away, an easy ride and mostly significantly downhill. I had a spare tubular so I mounted in on his clincher rim, pumped it up to a reasonable pressure, warned him not to corner or brake too hard, and followed him to the bike shop where he gave me my tire back. Since then I've usually carried a patch kit on my tubular-tired bikes. It's kinda' like carrying a flashlight on a sunny day but you never know when you might meet someone who's still in the dark.
Cheers
#1471
What??? Only 2 wheels?
Join Date: Apr 2010
Location: Boston-ish, MA
Posts: 13,434
Bikes: 72 Peugeot UO-8, 82 Peugeot TH8, 87 Bianchi Brava, 76? Masi Grand Criterium, 74 Motobecane Champion Team, 86 & 77 Gazelle champion mondial, 81? Grandis, 82? Tommasini, 83 Peugeot PF10
Mentioned: 189 Post(s)
Tagged: 0 Thread(s)
Quoted: 1222 Post(s)
Liked 645 Times
in
232 Posts
Great! But why were you carrying a tubular tire on a bike with clincher wheels? This a story worth telling, I am sure.
__________________
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
Real cyclists use toe clips.
With great bikes comes great responsibility.
jimmuller
#1472
Senior Member
Join Date: Jun 2014
Location: Ontario, Canada
Posts: 4,624
Bikes: iele Latina, Miele Suprema, Miele Uno LS, Miele Miele Beta, MMTB, Bianchi Model Unknown, Fiori Venezia, Fiori Napoli, VeloSport Adamas AX
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1324 Post(s)
Liked 927 Times
in
640 Posts
When I rode the bike with the tubular tire on the clincher rim to the bike shop the guys working there were quite surprised that it was able to be done.
Someone on these forums said that one should watch for chafing of the tubular tire by the rim of a clincher wheel if riding a tubular tire for any great distance. I've never had any problems with the distances I've used.
This using a tubular tire on a clincher rim came about one day when I went to ride my bicycle and discovered a very large bulge in the tire due to having it a wide gap in the road the day before and severely damaging the clincher tire on it. That tire was ready to blow so in desperation I tried putting an old spare tubular tire i had here on it. It worked and I was able to ride to the bike shop and get a new tire.
Cheers
#1473
Freewheel Medic
Join Date: Oct 2005
Location: An Island on the Coast of GA!
Posts: 12,882
Bikes: Snazzy* Schwinns, Classy Cannondales & a Super Pro Aero Lotus (* Ed.)
Mentioned: 140 Post(s)
Tagged: 0 Thread(s)
Quoted: 1452 Post(s)
Liked 2,194 Times
in
962 Posts
All this "clincher" diversion has diluted "totally tubular" with confusing and distracting concepts which are infecting the health of this thread with a deadly virus.
Don't you all know that we are in a pandemic--- and clinchers and tubulars MUST social distance from each other by at least two meters!?! (keeping this metric) Thus a tubular cannot be mounted on a clincher!
The next thing someone will suggest that if clinchers are scrubbed with antiseptic and bathed in powerful UV light they can be installed on tubular rims.
Don't you all know that we are in a pandemic--- and clinchers and tubulars MUST social distance from each other by at least two meters!?! (keeping this metric) Thus a tubular cannot be mounted on a clincher!
The next thing someone will suggest that if clinchers are scrubbed with antiseptic and bathed in powerful UV light they can be installed on tubular rims.
__________________
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
Bob
Enjoying the GA coast all year long!
Thanks for visiting my website: www.freewheelspa.com
#1474
only here for the "LIKES"
Join Date: Nov 2004
Location: squirrel cage of anxiety and delusion
Posts: 477
Mentioned: 143 Post(s)
Tagged: 0 Thread(s)
Quoted: 1642 Post(s)
Likes: 0
Liked 2,235 Times
in
1,050 Posts
Here's some stuff that can hopefully act as "mind bleach" against all that clincher nonsense.
#1475
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,842
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2337 Post(s)
Liked 2,820 Times
in
1,540 Posts
Wow a lot of that applies today...the mounting method is almost identical to what is listed on yellow jersey
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)