Origins of Wrap-Around Seat Stays
#1
Senior Member
Thread Starter
Join Date: Jun 2018
Location: The Urban Shores Of Michigami
Posts: 1,810
Bikes: ........................................ .....Holdsworth "Special"..... .......Falcon "Special".......... .........Miyata 912........... ........................................
Liked 696 Times
in
437 Posts
Origins of Wrap-Around Seat Stays
In the 5-Speed Freewheel thread, I noticed that the French Peschi posted by member VintageRide has "wrap-around seat stays", I always thought this was an English thing for no other reason than the only bikes I own with those type of stays are of English origin, Falcon & Raleigh.
Who first came up with the idea and what are the benefits and drawbacks of such a design? The only thing that jumps out at me are the spindly nature of the stays.
Who first came up with the idea and what are the benefits and drawbacks of such a design? The only thing that jumps out at me are the spindly nature of the stays.
Last edited by branko_76; 08-26-22 at 05:14 AM.
Likes For branko_76:
#2
Senior Member
Thread Starter
Join Date: Jun 2018
Location: The Urban Shores Of Michigami
Posts: 1,810
Bikes: ........................................ .....Holdsworth "Special"..... .......Falcon "Special".......... .........Miyata 912........... ........................................
Liked 696 Times
in
437 Posts
#3
Senior Member
Thread Starter
Join Date: Jun 2018
Location: The Urban Shores Of Michigami
Posts: 1,810
Bikes: ........................................ .....Holdsworth "Special"..... .......Falcon "Special".......... .........Miyata 912........... ........................................
Liked 696 Times
in
437 Posts
Likes For branko_76:
#4
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,803
Bikes: It's complicated.
Liked 6,164 Times
in
2,399 Posts
No idea when they first started appearing, but you certainly see a lot of vintage English bikes with wrap arounds.
As far as advantages/disadvantages, I've haven't brazed any up that way (yet), but they'd be a bit more difficult as both seat stays have to meet up at the same exact place so they're even. Here's a modern, available wrap around casting (from framebuildersupply.com) that I'd probably use if I wanted to to do that.
A clear advantage would be more surface area for the braze filler material. More surface area = stronger joint.
If I were to braze seat stays on "uncoupled", I could be off by a bit side to side and it wouldn't matter structurally. Visually it would bother the heck out of me though.
As far as advantages/disadvantages, I've haven't brazed any up that way (yet), but they'd be a bit more difficult as both seat stays have to meet up at the same exact place so they're even. Here's a modern, available wrap around casting (from framebuildersupply.com) that I'd probably use if I wanted to to do that.
A clear advantage would be more surface area for the braze filler material. More surface area = stronger joint.
If I were to braze seat stays on "uncoupled", I could be off by a bit side to side and it wouldn't matter structurally. Visually it would bother the heck out of me though.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
#5
Senior Member
Thread Starter
Join Date: Jun 2018
Location: The Urban Shores Of Michigami
Posts: 1,810
Bikes: ........................................ .....Holdsworth "Special"..... .......Falcon "Special".......... .........Miyata 912........... ........................................
Liked 696 Times
in
437 Posts
.
I always assumed both stays of the old "wrap-arounds" were one length of tubing heated and then "wrapped" around the seat cluster, something like a glass artisan would do.
I always assumed both stays of the old "wrap-arounds" were one length of tubing heated and then "wrapped" around the seat cluster, something like a glass artisan would do.
No idea when they first started appearing, but you certainly see a lot of vintage English bikes with wrap arounds.
As far as advantages/disadvantages, I've haven't brazed any up that way (yet), but they'd be a bit more difficult as both seat stays have to meet up at the same exact place so they're even. Here's a modern, available wrap around casting (from framebuildersupply.com) that I'd probably use if I wanted to to do that.
A clear advantage would be more surface area for the braze filler material. More surface area = stronger joint.
As far as advantages/disadvantages, I've haven't brazed any up that way (yet), but they'd be a bit more difficult as both seat stays have to meet up at the same exact place so they're even. Here's a modern, available wrap around casting (from framebuildersupply.com) that I'd probably use if I wanted to to do that.
A clear advantage would be more surface area for the braze filler material. More surface area = stronger joint.
Likes For branko_76:
#6
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,803
Bikes: It's complicated.
Liked 6,164 Times
in
2,399 Posts
I just checked in the Atelier, and although I have a lot of older English frames, none have full wrap around stays. [MENTION=184012]Doug Fattic[/MENTION] apprenticed in England "back in the day", perhaps he can comment?
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
#7
Senior Member
Thread Starter
Join Date: Jun 2018
Location: The Urban Shores Of Michigami
Posts: 1,810
Bikes: ........................................ .....Holdsworth "Special"..... .......Falcon "Special".......... .........Miyata 912........... ........................................
Liked 696 Times
in
437 Posts
That makes sense, the portion that is welded to the seat cluster is a much smaller diameter so both legs of the seat stays would not be manufactured from one length
#8
Senior Member
My Carlton and my Centurion both have 'em, and I like it.
Though, the force vector of the seatstays acting on the cluster is in the 'upward' direction. Having all that attachment on the opposite side of the cluster is a bit strange, from a purely structural view. I would think that, structurally, one would want to mount the seatstays to the backside of the seat-tube...
Though, the force vector of the seatstays acting on the cluster is in the 'upward' direction. Having all that attachment on the opposite side of the cluster is a bit strange, from a purely structural view. I would think that, structurally, one would want to mount the seatstays to the backside of the seat-tube...
Likes For DiegoFrogs:
#9
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,803
Bikes: It's complicated.
Liked 6,164 Times
in
2,399 Posts
My Carlton and my Centurion both have 'em, and I like it.
Though, the force vector of the seatstays acting on the cluster is in the 'upward' direction. Having all that attachment on the opposite side of the cluster is a bit strange, from a purely structural view. I would think that, structurally, one would want to mount the seatstays to the backside of the seat-tube...
Though, the force vector of the seatstays acting on the cluster is in the 'upward' direction. Having all that attachment on the opposite side of the cluster is a bit strange, from a purely structural view. I would think that, structurally, one would want to mount the seatstays to the backside of the seat-tube...
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
#10
Senior Member
Thread Starter
Join Date: Jun 2018
Location: The Urban Shores Of Michigami
Posts: 1,810
Bikes: ........................................ .....Holdsworth "Special"..... .......Falcon "Special".......... .........Miyata 912........... ........................................
Liked 696 Times
in
437 Posts
hmmm........ so are the seat stays in tension or compression?
#11
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,803
Bikes: It's complicated.
Liked 6,164 Times
in
2,399 Posts
My comments are directed at the interface between the wrap around stays and the seat lug/top tube intersection.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
#12
Senior Member
The Peschi originated from Nice where there is, or was, a strong Italian presence such as the Urago brothers. Even their bikes are not all that common but the higher end models did feature wrap around seat stays as well as fish mouth ends at the dropouts, which the Peschi also has. I will most likely never know the history of the bike but there is a very good likelihood that the Urago shop constructed it for someone.
Some very talented frame builders in Europe remained anonymous even though they made very nice frames, often for a racing team or specific rider. Still possible to find a lightweight frame that is the equal of the more well known marques for a lot less.
Some very talented frame builders in Europe remained anonymous even though they made very nice frames, often for a racing team or specific rider. Still possible to find a lightweight frame that is the equal of the more well known marques for a lot less.
Last edited by VintageRide; 08-27-22 at 02:08 PM.
Likes For VintageRide:
#13
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,975
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Liked 1,472 Times
in
912 Posts
I thought the wraparound seat stays were one of the coolest features of my 1971 Nishiki Competition. In my current stable, only the 1962 Carlton has them, but they really flatten out, compared to the more tubular, Raleigh-like form on the Nishiki.
All stripped down and ready to rebuild.
All stripped down and ready to rebuild.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
Likes For John E:
#14
Full Member
Join Date: Sep 2020
Location: Sacramento, CA
Posts: 456
Bikes: 2017 Sage Skyline, 2015 Co-Motion Periscope Tandem, 2006 Kona Jake, 1978 Richard Sachs, 1977 Peugeot PRN10, 1974 Allegro Schweitzermeister Model 76, 1972 Hugo Rickert Spezial, 1971 Fuji Finest
Liked 760 Times
in
226 Posts
Swiss Allegros from the 60s and 70s had this design feature
Mine is a 1974(ish) bike (Schweitzermeister model 76) but I have seen models from the 60s with these stays.
Likes For Sactown_Albert:
#15
framebuilder
The wrap around attachment style starts with with 2 solid plugs with a flattened side brazed into the top of each seat stay. These plugs are called "top eyes". The difference in style between just having them brazed on the side of the lug or wrapping around the lug involves positioning the plug a little higher and filling in the gap between both tips of the top eyes with brass and filing the resulting brass blob to look like one continuous piece between the stays.
I don't know what builder started the style or how long ago it became popular but it was a somewhat seat stay treatment for several British builders after the war.
I don't know what builder started the style or how long ago it became popular but it was a somewhat seat stay treatment for several British builders after the war.
#16
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,803
Bikes: It's complicated.
Liked 6,164 Times
in
2,399 Posts
The wrap around attachment style starts with with 2 solid plugs with a flattened side brazed into the top of each seat stay. These plugs are called "top eyes". The difference in style between just having them brazed on the side of the lug or wrapping around the lug involves positioning the plug a little higher and filling in the gap between both tips of the top eyes with brass and filing the resulting brass blob to look like one continuous piece between the stays.
I don't know what builder started the style or how long ago it became popular but it was a somewhat seat stay treatment for several British builders after the war.
I don't know what builder started the style or how long ago it became popular but it was a somewhat seat stay treatment for several British builders after the war.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
Likes For gugie:
#17
Senior Member
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,949
Bikes: A bunch of old bikes and a few new ones
Liked 4,321 Times
in
2,381 Posts
I have a Witcomb I need to build up one of these days. I like the wrap around seat stays on it.
Likes For bikemig:
#18
Senior Member
Thread Starter
Join Date: Jun 2018
Location: The Urban Shores Of Michigami
Posts: 1,810
Bikes: ........................................ .....Holdsworth "Special"..... .......Falcon "Special".......... .........Miyata 912........... ........................................
Liked 696 Times
in
437 Posts
Those flat "wrap-arounds" are much more elegant than the round type used in the Raleigh Grand Prix and lower end Falcon
.
.
Last edited by branko_76; 08-27-22 at 09:48 PM.
Likes For 1simplexnut: