juvela

-----


"Dost bell ringeth for thee?"


-----

The Golden Boy 

I've got 3 bells on 3 bikes; all three are mounted on the stem on the right side. A brass Crane Suzu, a brass Crane Karen and a "some kind of metal Suzu style that came on a Raleigh."

From what I've been able to gather- a "Suzu" bell has the hammer striker, the Karen has the striker mounted to a spring.

I think I like the brass Suzu best.

1989Pre 

"Be not afeard; the isle is full of noises,Sounds and sweet airs, that give delight, and hurt not."

1989Pre 

Okay, after all these examples, is O.P. any-the-wiser?

Velo Mule

I've got both Ping! bells and Ring-a-ling bells. I prefer the ring-a-lings. I was on a business trip to the Anaheim area and stopped in at Daiso. I picked up a few bicycle related items while there. Most items are $1.75 and that is what I paid for this bell. It works and sounds great. I installed it on my Le Tour on the stem. With drop bars I like to keep the bars free of stuff so that I have more room for my hands.

noglider 

Brass is best. It resonates for a long time.

rumrunn6

rode w/ my later Father's bear bell hanging from my bars this weekend. so there was always a little jingling in the air. I think the dogs heard it more than the ppl

SJX426 

@PhilFo - Thanks for pointing out the E-Ne. Bought one and installed. Not as loud or long as the bigger cousin but still acceptable for a small bell.
CraneENe2 on Flickr

Velo Mule

Velo Orange bell on upright bars.

Small cog

Just about visible on my bars here is one from the Lion Bellworks made in Birmingham, the one in the West Midlands that is, check the website for the ringtone.

https://www.lionbellworks.co.uk/

tcs

Lion bells. Word. Alpha and omega. Low fundamental, lush overtone spectrum, sustain into next week. Makes strong men grow misty-eyed, women feel flushed and small children jump up and down, clapping their hands. Endorsed by Quasimodo. Suitable for ringing the Nine Tailors. Has a written part in Josef Strauss' Vélocipéde Polka.

tcs

Fun fact: The Tokyo San Esu Universal Sound Bell is in its 50th year of production.

tcs

If all your riding buddies have Spurcycles, you need a Sögreni.

https://sogreni.com/en-us/collection...s/sogreni-bell

tcs

The Version 1 Rubber Foot/Grommet on my early Spurcycle deteriorated and had to be replaced. The Crane E-Ne I purchased at around the same time for half the Spurcycle's cost has not needed any attention or repair (as one would anticipate for a bell).

OTS 

I had a front end collision with an ATV on a city MUP. My Spurcycle Bell was significantly damaged in the process.
After I recovered physically, I sent the bell in for repair and they sent me a new bell for no charge and wished me a full and complete recovery.

tcs

In my case, it would have cost me more to ship the bell back for 'free' repair of the deteriorated parts.

RB1-luvr

my single ping bells get little attention on the MUP. I had a lady who didn't move tell me she thought it was someone's phone. I will update to ringers at some point.

tcs

I give them two or three pings, or for the truly recalcitrant MUP user, a dozen or more. I haven't been torpedoed yet.

https://www.pingplotter.com/wisdom/a...ntinuous-ping/

Manny66 

All of my bikes have bells (I have more than 10) , some cheapo bells and some pretty good pricey ones.

The Crane bells are the loudest but also the biggest and nicest looking out there. But a little big .

The little Spurcycle bells are a pain in the ass to mount as the clamp part has sharp edges so you have to use tape underneath to prevent scratches. There are 2 size clamps included for handlebar or frame mounting , a little work is involved in getting the clamp curved just right and staying place while you screw it down .They do have a really nice High pitch Ping to them , and are so compact you can mount them on your handlebar under your brake lever for easy access.

The Kong bells are on my modern bikes and fit nicely on the top of the bars next to the Stem , I mount them upside down to push the striker lever easier. They are Rounded so you have a smooth area to rest your hands on when you are hammering thru the wind. I like to keep my hands on the bars closest to the stem to get a little more Aero, so these are very convenient for that as some bells get in the way on the bars.

The Key ,I think , is to find a bell you can mount and activate easily while riding , and not interfere with your hands or the look of the bike.

I pick up bells at Swap Meets and keep a few on hand but even some of the cheap ones are nice and loud.

tcs

The knock on Knog, when they came out, was that they did everything a bell should except make noise. They were too quiet. Allegedly Knog's sound production has improved. Your take in comparison to your other bells?

79pmooney

A clutch of bells.

79pmooney

I saw the thread and thought the more somber "For Whom the Bell Tolls".

Small cog

A few years ago I was given a Raleigh Lenton that was on the scrapheap at my local bikeshop which a friend owns and has been there over 100 years most of that time owned by his family, a couple of days ago I was looking for a suitable vintage bell for it and found this one sold by the same shop probably in the 1960s or '70s, I am not sure if S J Soanes is Sid's father or grandfather but a good find.

bironi

A couple ?'s about the Suzu full size bell.
I have a few, but can't remember the type of washer comes with it originally.
Is it a flat or split lock washer?
I keep futzing with mine to try to get the ring note of my preference, any advice from other particular people?
Thanks much,
By

Aardwolf

Just checked mine: split washer 8.76mm outside diameter