Bike Pre-Fitting For New Bike
#26
Junior Member
Thread Starter
Like you, I am 5'-10" +/- with a ~30" inseam. I have one 58 cm. two 56 cm, and one 54 cm. All are relatively comfortable to ride with the two 56es best. I started with the 58 cm (freebee from my brother) and then went smaller after riding for a few years. As others have stated above, your fit will change as you get miles under you.
I would buy an inexpensive local used bike in the size you think you want, ride it, tweek it, learn from it, and after you are comfortable, in better shape with different flexibility than now, spend the $3-4k for what you want.
I would buy an inexpensive local used bike in the size you think you want, ride it, tweek it, learn from it, and after you are comfortable, in better shape with different flexibility than now, spend the $3-4k for what you want.
Likes For howaboutme:
#27
just another gosling
Join Date: Feb 2007
Location: Everett, WA
Posts: 19,597
Bikes: CoMo Speedster 2003, Trek 5200, CAAD 9, Fred 2004
Mentioned: 115 Post(s)
Tagged: 0 Thread(s)
Quoted: 3917 Post(s)
Liked 1,971 Times
in
1,407 Posts
I was pretty much you. I hadn't been on a road bike in decades and needed to rediscover the sport, which had changed a lot - shoes, pedals, clothes, gearing, wheels, tires, position, everything. I subscribed to Bicycling magazine for a year to catch up on what was going on. Only one year because they repeat all their stories every year, just in a slightly different format. That process worked perfectly for me. By the time I was ready to buy an expensive bike, I'd already worked up to finishing a double century and knew exactly what I wanted. Starting from zero, that process took 2 years. I had a great time becoming a rider again. One of the things I discovered was that the bike was the least important ingredient for cycling comfort and performance.
__________________
Results matter
Results matter
Likes For Carbonfiberboy:
#28
Junior Member
What does independent mean? A fitter that is not tied to a bike shop? The one above is as close as it gets. It's a sports coaching shop that CAN sell you bikes. All of the others are tied to shops. One does the the Shimano Fit System (I assume competitor to the GURU system).
When you say they CAN sell you a bike, does that mean any bike? Or are they "dealers" of any particular brands? Being a dealer is not a bad thing, I'm just curious. If they are dealers, I'd also be curious to know if they try to steer you towards the brands they sell or if they are somewhat agnostic. Also, what type of post-purchase fit services do they provide? If you purchase a bike from them after having them do a sizing, do they include a fit for the new bike? It would be nice if they did.
#29
Junior Member
I agree with your sentiment, but . . .before I bought my "forever bike" I went through 3 older, used steel bikes changing up to a slightly better bike each time.
I was pretty much you. I hadn't been on a road bike in decades and needed to rediscover the sport, which had changed a lot - shoes, pedals, clothes, gearing, wheels, tires, position, everything. I subscribed to Bicycling magazine for a year to catch up on what was going on. Only one year because they repeat all their stories every year, just in a slightly different format. That process worked perfectly for me. By the time I was ready to buy an expensive bike, I'd already worked up to finishing a double century and knew exactly what I wanted. Starting from zero, that process took 2 years. I had a great time becoming a rider again. One of the things I discovered was that the bike was the least important ingredient for cycling comfort and performance.
I was pretty much you. I hadn't been on a road bike in decades and needed to rediscover the sport, which had changed a lot - shoes, pedals, clothes, gearing, wheels, tires, position, everything. I subscribed to Bicycling magazine for a year to catch up on what was going on. Only one year because they repeat all their stories every year, just in a slightly different format. That process worked perfectly for me. By the time I was ready to buy an expensive bike, I'd already worked up to finishing a double century and knew exactly what I wanted. Starting from zero, that process took 2 years. I had a great time becoming a rider again. One of the things I discovered was that the bike was the least important ingredient for cycling comfort and performance.
Sometimes buying a "better bike than you need" creates more excitement and motivation to ride, which is always a good thing. Plus, there's no rule against keeping the first bike and buying another one. How many of us only have one bike? Not me.
#30
Junior Member
Thread Starter
Yeah, not tied to a shop is pretty much what I meant. When I saw the GURU reference in your earlier post I assumed it was a shop. I'm not used to seeing GURU outside of a shop environment.
When you say they CAN sell you a bike, does that mean any bike? Or are they "dealers" of any particular brands? Being a dealer is not a bad thing, I'm just curious. If they are dealers, I'd also be curious to know if they try to steer you towards the brands they sell or if they are somewhat agnostic. Also, what type of post-purchase fit services do they provide? If you purchase a bike from them after having them do a sizing, do they include a fit for the new bike? It would be nice if they did.
When you say they CAN sell you a bike, does that mean any bike? Or are they "dealers" of any particular brands? Being a dealer is not a bad thing, I'm just curious. If they are dealers, I'd also be curious to know if they try to steer you towards the brands they sell or if they are somewhat agnostic. Also, what type of post-purchase fit services do they provide? If you purchase a bike from them after having them do a sizing, do they include a fit for the new bike? It would be nice if they did.
I should have done some research first! This place I had referenced has closed. Oh well...
Gradually upgrading over time is wise because, like you said, by the time you get to your "forever bike" you really know what you want that bike to be. Purchasing the "forever bike" too soon may result in a parting of the ways sooner rather than later. But I really don't think that's a big deal if the budget allows for it.
Sometimes buying a "better bike than you need" creates more excitement and motivation to ride, which is always a good thing. Plus, there's no rule against keeping the first bike and buying another one. How many of us only have one bike? Not me.
Sometimes buying a "better bike than you need" creates more excitement and motivation to ride, which is always a good thing. Plus, there's no rule against keeping the first bike and buying another one. How many of us only have one bike? Not me.
I really have no issues buying a better bike because it will motivate me more, and then, buying a better one (or likely upgrading if bike fits) later. I have a personality where I will be unsatisfied knowing I didn't buy the best bike I can just because I was worried that it would not be my forever bike. Plus, doesn't the extra price tag mean an increase in mph? Yeah...
Last edited by howaboutme; 01-05-24 at 07:25 PM. Reason: link to bike fit place removed because place has closed.
#31
Senior Member
About a couple decades ago, I saw a sports medicine doctor regarding pain in my shoulder. He wanted to know details about my various activities and bicycling came up. That’s when I found out that they actually do a personalized fit for their patients for bicycles. There was never any steering me into buying a bicycle from any specific place. I guess, this is as independent as it gets.
You may want to look into something similar, if available from your medical-business.
You may want to look into something similar, if available from your medical-business.
Likes For Alan K:
#32
Junior Member
Thread Starter
Just saw someone post this website in another thread:
www.myvelofit.com
Any thoughts from the community?
www.myvelofit.com
Any thoughts from the community?
#33
Junior Member
Thread Starter
I went to a local shop today and tried out 3 bikes.
- BMC 23 Roadmachine 01 THREE at 56cm
- Specialized 24 Roubaix at 54cm
- BMC 23 Teammachine at 54cm
The bike's were tested based on size and not necessarily based on budget. It's what they had available. My thoughts:
- BMC 23 Roadmachine 01 THREE at 56cm: Felt comfortable but had a feeling that it wasn't aggressive enough, like the brakes (using top of hoods) were too close.
- Specialized 24 Roubaix at 54cm: Felt comfortable and better than the one above. It felt a bit more aggressive, hard to explain.
- BMC 23 Teammachine at 54cm: Because I felt like I could handle a more aggressive geometry, they had me test out the team machine geometry. I have to admit, it felt good too!
So I'm all over the place! The only conclusion that came out of testing those 3 bikes is that 54cm seemed better but that's just from a few minutes of riding around so not truly tested. At the end of the day, I still think an endurance bike is best because it'll allow me to fit wider tires if I want to do some gravel riding.
This place offers fittings w/ the Specialized Retul system. I may do that to get a good baseline. I also want to see more brands, particularly Giant. More to do!
- BMC 23 Roadmachine 01 THREE at 56cm
- Specialized 24 Roubaix at 54cm
- BMC 23 Teammachine at 54cm
The bike's were tested based on size and not necessarily based on budget. It's what they had available. My thoughts:
- BMC 23 Roadmachine 01 THREE at 56cm: Felt comfortable but had a feeling that it wasn't aggressive enough, like the brakes (using top of hoods) were too close.
- Specialized 24 Roubaix at 54cm: Felt comfortable and better than the one above. It felt a bit more aggressive, hard to explain.
- BMC 23 Teammachine at 54cm: Because I felt like I could handle a more aggressive geometry, they had me test out the team machine geometry. I have to admit, it felt good too!
So I'm all over the place! The only conclusion that came out of testing those 3 bikes is that 54cm seemed better but that's just from a few minutes of riding around so not truly tested. At the end of the day, I still think an endurance bike is best because it'll allow me to fit wider tires if I want to do some gravel riding.
This place offers fittings w/ the Specialized Retul system. I may do that to get a good baseline. I also want to see more brands, particularly Giant. More to do!
#34
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 15,224
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6330 Post(s)
Liked 4,919 Times
in
3,388 Posts
Whether you do retul or the myvelofit, it'll be interesting to see what they recommend for you if they are free or don't cost much. The one thing they can't really tell you, nor can any of us, is whether you will like a very relaxed fit, a somewhat aero fit or a very aero and aggressive race fit. Some will like all those fits, some will like one or two and some won't be able to tolerate any for very long.
If they give you recommendations for actual models and what size in them to try, then that will be a plus compared to some fittings that just give you a bunch of numbers to go out and look for.
Still I wonder if they'll be much different than just looking for the brands suggested sizing for that bike and then realizing that a size up or down from that might feel better depending on what your preference is.
When you change sizes within the same model of bike, frame stack and frame reach are generally the noticeable changes. Stack affecting how much saddle to bar drop you might get and reach affecting how far your hands are out in front of you. Assuming the same number of spacers under the stem and the same length stem and same bars.
But also other things change too. So watch for longer/shorter cranks and wider/narrower bars. If you have a preference for one or the other, then cranks particularly could be a expensive change. Bars too if you want very high tier bars. Plain alloy bars aren't too expensive if you need wider or narrower than your size bike comes with.
If they give you recommendations for actual models and what size in them to try, then that will be a plus compared to some fittings that just give you a bunch of numbers to go out and look for.
Still I wonder if they'll be much different than just looking for the brands suggested sizing for that bike and then realizing that a size up or down from that might feel better depending on what your preference is.
When you change sizes within the same model of bike, frame stack and frame reach are generally the noticeable changes. Stack affecting how much saddle to bar drop you might get and reach affecting how far your hands are out in front of you. Assuming the same number of spacers under the stem and the same length stem and same bars.
But also other things change too. So watch for longer/shorter cranks and wider/narrower bars. If you have a preference for one or the other, then cranks particularly could be a expensive change. Bars too if you want very high tier bars. Plain alloy bars aren't too expensive if you need wider or narrower than your size bike comes with.
Likes For Iride01:
#35
Junior Member
Thread Starter
I went to try the Giant Defy today. I actually tried the TCR too, why not? They only had both in the M/L but it fit pretty well in the limited test ride that I did. The seat had to be lowered a bit though. Seeing the seat that low made it seem weird but I guess all that matters is it feels good. Overall both TCR and Defy felt good but the Defy was noticeably more comfortable, as it should. Both bikes were of the same trim level so I was more or less comparing apples to apples on everything except the bike geometry. I was not comfortable saying the M/L is my size so I asked them to try and source an M size so I can try that. Overall, I feel good about it. I've read and watched tons of videos on this so glad I finally rode one.
I'm going to try and see the Trek Domane tomorrow and still have not decided if I'm going to do a pre-bike fit.
I'm going to try and see the Trek Domane tomorrow and still have not decided if I'm going to do a pre-bike fit.
Likes For howaboutme:
#36
don't try this at home.
Join Date: Jan 2006
Location: N. KY
Posts: 5,975
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 987 Post(s)
Liked 528 Times
in
363 Posts
Looking at bike geometry. Sizes do vary between manufacturers!
Giant Defy, in Medium:
Stack 558mm, Reach 380mm.
Giant TCR advanced disc 1 pro compact, in Medium:
Stack 545mm, Reach 388mm. So the bars are 13mm lower, 8mm longer reach. (Standard height spacers under the stem are 10mm each.)
~~~
Roubaix SL8, in 54cm:
Stack 585mm, Reach 381mm. a 27mm higher stack than the Defy. Similar reach.
Roubaix SL8 in 56mm:
Stack 605mm, Reach 389mm. a 60mm higher stack than the TCR. That's a big difference! Similar reach.
~~~
Trek Domane SL5 Gen 4 in 54cm. (most sizes are out of stock on their website!)
Stack 575mm, Reach 374mm. Stack heights in between the bikes above. A bit shorter reach too.
Trek Domane SL5 Gen 4 in 56cm:
Stack 591mm, Reach 377mm. Note that this 2cm larger frame is only 3mm longer reach. That's not unusual, though.
Giant Defy, in Medium:
Stack 558mm, Reach 380mm.
Giant TCR advanced disc 1 pro compact, in Medium:
Stack 545mm, Reach 388mm. So the bars are 13mm lower, 8mm longer reach. (Standard height spacers under the stem are 10mm each.)
~~~
Roubaix SL8, in 54cm:
Stack 585mm, Reach 381mm. a 27mm higher stack than the Defy. Similar reach.
Roubaix SL8 in 56mm:
Stack 605mm, Reach 389mm. a 60mm higher stack than the TCR. That's a big difference! Similar reach.
~~~
Trek Domane SL5 Gen 4 in 54cm. (most sizes are out of stock on their website!)
Stack 575mm, Reach 374mm. Stack heights in between the bikes above. A bit shorter reach too.
Trek Domane SL5 Gen 4 in 56cm:
Stack 591mm, Reach 377mm. Note that this 2cm larger frame is only 3mm longer reach. That's not unusual, though.
Last edited by rm -rf; 01-14-24 at 07:07 PM.
Likes For rm -rf:
#37
don't try this at home.
Join Date: Jan 2006
Location: N. KY
Posts: 5,975
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 987 Post(s)
Liked 528 Times
in
363 Posts
I haven't shopped for bikes in 9 years, but in the past, I've always been able to do a long, solo test ride. 30 minutes or an hour. That long ride was useful. I wonder what shop policy is now.
Bike clothing: the shop won't care if you just bring street clothes. But with these nice bikes, you'll want real bike shorts with your new bike, which are so much better for rides over 30 minutes or so. And bike shoes too, but the test rides can have disposable flat pedals for street shoes attached to the clipless pedals, or perhaps some inexpensive flat pedals instead of the clipless pedals.
More stuff to shop and decide!
Bike clothing: the shop won't care if you just bring street clothes. But with these nice bikes, you'll want real bike shorts with your new bike, which are so much better for rides over 30 minutes or so. And bike shoes too, but the test rides can have disposable flat pedals for street shoes attached to the clipless pedals, or perhaps some inexpensive flat pedals instead of the clipless pedals.
More stuff to shop and decide!
Last edited by rm -rf; 01-14-24 at 07:34 PM.
#38
Junior Member
Thread Starter
How does one justify the Trek? It road great but comparing it to the Giant, it's hard to think that a few extra mm tire clearance and frame storage is worth it? Plus the extra weight....
#39
I'm good to go!
Join Date: Jul 2017
Location: Mississippi
Posts: 15,224
Bikes: Tarmac Disc Comp Di2 - 2020
Mentioned: 51 Post(s)
Tagged: 0 Thread(s)
Quoted: 6330 Post(s)
Liked 4,919 Times
in
3,388 Posts
If needing wider tires because you'll always be riding in loose gravel might be one way to justify it. However for the paved road, they are all wide enough.
Consider the group sets that are on them. I don't have any gripes about mechanical. But I did have to adjust my mechanical groups about once a year or maybe more. Electronic shifting has been maintenance free for the entire 4 years I've had my bike with Di2. Other than when I thought I knew better and mucked up some settings in eTube project and I took it back to the shop and they fixed my mistake. They got a good laugh so I guess that's why they didn't charge me to correct it. Though electronic does leave you with more potential costs if something physically or truly get screwed up beyond repair.
Frame storage. meh! Not for me. I don't like bulky looking down tubes. But if that's you, then go for it.
How about color? Red and other brightly colored bikes are faster! <grin> Hey face it, aesthetics are everything. Which bike appeals to you and says "ride me!"
Consider the group sets that are on them. I don't have any gripes about mechanical. But I did have to adjust my mechanical groups about once a year or maybe more. Electronic shifting has been maintenance free for the entire 4 years I've had my bike with Di2. Other than when I thought I knew better and mucked up some settings in eTube project and I took it back to the shop and they fixed my mistake. They got a good laugh so I guess that's why they didn't charge me to correct it. Though electronic does leave you with more potential costs if something physically or truly get screwed up beyond repair.
Frame storage. meh! Not for me. I don't like bulky looking down tubes. But if that's you, then go for it.
How about color? Red and other brightly colored bikes are faster! <grin> Hey face it, aesthetics are everything. Which bike appeals to you and says "ride me!"
#40
Junior Member
Thread Starter
If needing wider tires because you'll always be riding in loose gravel might be one way to justify it. However for the paved road, they are all wide enough.
Consider the group sets that are on them. I don't have any gripes about mechanical. But I did have to adjust my mechanical groups about once a year or maybe more. Electronic shifting has been maintenance free for the entire 4 years I've had my bike with Di2. Other than when I thought I knew better and mucked up some settings in eTube project and I took it back to the shop and they fixed my mistake. They got a good laugh so I guess that's why they didn't charge me to correct it. Though electronic does leave you with more potential costs if something physically or truly get screwed up beyond repair.
Frame storage. meh! Not for me. I don't like bulky looking down tubes. But if that's you, then go for it.
How about color? Red and other brightly colored bikes are faster! <grin> Hey face it, aesthetics are everything. Which bike appeals to you and says "ride me!"
Consider the group sets that are on them. I don't have any gripes about mechanical. But I did have to adjust my mechanical groups about once a year or maybe more. Electronic shifting has been maintenance free for the entire 4 years I've had my bike with Di2. Other than when I thought I knew better and mucked up some settings in eTube project and I took it back to the shop and they fixed my mistake. They got a good laugh so I guess that's why they didn't charge me to correct it. Though electronic does leave you with more potential costs if something physically or truly get screwed up beyond repair.
Frame storage. meh! Not for me. I don't like bulky looking down tubes. But if that's you, then go for it.
How about color? Red and other brightly colored bikes are faster! <grin> Hey face it, aesthetics are everything. Which bike appeals to you and says "ride me!"
#41
Junior Member
As for mechanical or electronic... The quality of shifting with the Di2 stuff is excellent (105 or Ultegra), battery life is quite long IMO, and it's extremely reliable. Plus, you can easily adjust your drivetrain with the eTube Project app on your phone..
#42
Junior Member
Thread Starter
Thanks! Yes, I agree.
I've also added the BMC Roadmachine to the mix. However, that bike's tire clearance is dramatically smaller than the others so I would to rethink the light graveling on that bike....Nothing to test out now since we have snow on the ground. Hopefully in a week or so.
I've also added the BMC Roadmachine to the mix. However, that bike's tire clearance is dramatically smaller than the others so I would to rethink the light graveling on that bike....Nothing to test out now since we have snow on the ground. Hopefully in a week or so.
#43
Junior Member
Thread Starter
Well...I'm sold on the Giant Defy! The shop found a Medium for me to try (I already tested the M/L) and it felt better and I felt confident that this is the one (even though I only tested on a trainer) so I went for it. So I answered my own question. I did not do a pre-bike fit!. I'll go back in to pick up the bike and get some adjustments done at that time. Then we'll go from there! Can't ride anyways right now.
Annoyed that the crankset is not a true 105!!!
PS... This is a 2023. Apparently you can't find any 2024s at this trim....
Annoyed that the crankset is not a true 105!!!
PS... This is a 2023. Apparently you can't find any 2024s at this trim....
Last edited by howaboutme; 01-20-24 at 09:18 PM.