Advantages of Different Seatstay Designs on CF Road Race Bikes?
#27
Senior Member
Join Date: May 2021
Posts: 8,771
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 4579 Post(s)
Liked 5,120 Times
in
3,162 Posts
Likes For PeteHski:
#28
Senior Member
Join Date: Sep 2007
Location: Far beyond the pale horizon.
Posts: 14,362
Mentioned: 32 Post(s)
Tagged: 0 Thread(s)
Quoted: 4314 Post(s)
Liked 1,388 Times
in
968 Posts
The Y-foil has a rear triangle (from the photo course if found).
The PX5 has much beefier chain stays.
I’m not sure if the last two were intended to be particularly “comfortable”. I’m not sure if the frames were particularly light. That bikes like this aren’t really made any more suggests they weren’t better than the standard frame that has stays.
So, it seems you don’t need seat stays but it appears there might be compromises needed to remove them.
Given the variety of stay arrangements, it doesn’t seem to matter much where they are placed or their shape. (But manufacturers will certainly still say what they do is the best. Until they change it.) That disc brakes allowed more freedom to move them about makes sense. Lower might be more aerodynamic but, maybe, not by much.
#29
Thread Killer
Join Date: Aug 2008
Location: Ann Arbor, MI
Posts: 12,519
Bikes: 15 Kinesis Racelight 4S, 76 Motebecane Gran Jubilée, 17 Dedacciai Gladiatore2, 12 Breezer Venturi, 09 Dahon Mariner, 12 Mercier Nano, 95 DeKerf Team SL, 19 Tern Rally, 21 Breezer Doppler Cafe+, 19 T-Lab X3, 91 Serotta CII, 23 3T Strada
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 3216 Post(s)
Liked 1,755 Times
in
1,059 Posts
The Trimble has a much beefier “main tube”.
The Y-foil has a rear triangle (from the photo course if found).
The PX5 has much beefier chain stays.
I’m not sure if the last two were intended to be particularly “comfortable”. I’m not sure if the frames were particularly light. That bikes like this aren’t really made any more suggests they weren’t better than the standard frame that has stays.
So, it seems you don’t need seat stays but it appears there might be compromises needed to remove them.
Given the variety of stay arrangements, it doesn’t seem to matter much where they are placed or their shape. (But manufacturers will certainly still say what they do is the best. Until they change it.) That disc brakes allowed more freedom to move them about makes sense. Lower might be more aerodynamic but, maybe, not by much.
The Y-foil has a rear triangle (from the photo course if found).
The PX5 has much beefier chain stays.
I’m not sure if the last two were intended to be particularly “comfortable”. I’m not sure if the frames were particularly light. That bikes like this aren’t really made any more suggests they weren’t better than the standard frame that has stays.
So, it seems you don’t need seat stays but it appears there might be compromises needed to remove them.
Given the variety of stay arrangements, it doesn’t seem to matter much where they are placed or their shape. (But manufacturers will certainly still say what they do is the best. Until they change it.) That disc brakes allowed more freedom to move them about makes sense. Lower might be more aerodynamic but, maybe, not by much.
Anyway though, the reason those roads designs did not persist is because they were not UCI compliant, not because they weren't better, which they almost certainly were from a variety of perspectives.
Likes For chaadster:
#30
OM boy
Thread Starter
Join Date: Jul 2005
Location: Goleta CA
Posts: 4,439
Bikes: a bunch
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 547 Post(s)
Liked 698 Times
in
464 Posts
The Trimble has a much beefier “main tube”.
The Y-foil has a rear triangle (from the photo course if found).
The PX5 has much beefier chain stays.
I’m not sure if the last two were intended to be particularly “comfortable”. I’m not sure if the frames were particularly light. That bikes like this aren’t really made any more suggests they weren’t better than the standard frame that has stays.
So, it seems you don’t need seat stays but it appears there might be compromises needed to remove them.
Given the variety of stay arrangements, it doesn’t seem to matter much where they are placed or their shape. (But manufacturers will certainly still say what they do is the best. Until they change it.) That disc brakes allowed more freedom to move them about makes sense. Lower might be more aerodynamic but, maybe, not by much.
The Y-foil has a rear triangle (from the photo course if found).
The PX5 has much beefier chain stays.
I’m not sure if the last two were intended to be particularly “comfortable”. I’m not sure if the frames were particularly light. That bikes like this aren’t really made any more suggests they weren’t better than the standard frame that has stays.
So, it seems you don’t need seat stays but it appears there might be compromises needed to remove them.
Given the variety of stay arrangements, it doesn’t seem to matter much where they are placed or their shape. (But manufacturers will certainly still say what they do is the best. Until they change it.) That disc brakes allowed more freedom to move them about makes sense. Lower might be more aerodynamic but, maybe, not by much.
Whose to say whether those design directions might have developed into more or less aero forms in comparison to today's offerings...
However, Triathlon not falling under UCI, meant that they continued to use bikes with these designs, and some can be seen in competition today. Certainly Bike sponsorship will be a big restriction of what you see under the top level Triathletes...
It'll be interesting to see how UCI reacts when REAL electronic shifting comes about - electronic internal hub systems with settable gear ratios, and prolly running belt drives, rather than the 800 lb gorilla of unnecessary weight - the bike chain. There's no reason why an internal gear change system can't be located in the crank/BB location and the rear be a single 'cog'... 'Direct' drive? Possible, depending on material engineering! Motos have had direct drive for many decades,, because weight is much less of a consideration.
At the moment 'Electronic shifting' is pretty much like the electric knife...
Ride On
Yuri - not sure I'll still be breathing when the really new and juicy stuff hits the road...
![Twitchy](images/smilies/twitchy.gif)
#31
Senior Member
Join Date: May 2021
Posts: 8,771
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 4579 Post(s)
Liked 5,120 Times
in
3,162 Posts
It'll be interesting to see how UCI reacts when REAL electronic shifting comes about - electronic internal hub systems with settable gear ratios, and prolly running belt drives, rather than the 800 lb gorilla of unnecessary weight - the bike chain. There's no reason why an internal gear change system can't be located in the crank/BB location and the rear be a single 'cog'... 'Direct' drive? Possible, depending on material engineering! Motos have had direct drive for many decades,, because weight is much less of a consideration.
At the moment 'Electronic shifting' is pretty much like the electric knife...
Ride On
Yuri - not sure I'll still be breathing when the really new and juicy stuff hits the road...
![Twitchy](images/smilies/twitchy.gif)
#32
climber has-been
Join Date: Dec 2004
Location: Palo Alto, CA
Posts: 7,260
Bikes: Scott Addict R1, Felt Z1
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 3557 Post(s)
Liked 3,718 Times
in
1,863 Posts
#33
Senior Member
Join Date: May 2021
Posts: 8,771
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 4579 Post(s)
Liked 5,120 Times
in
3,162 Posts
I agree, but I do find them a bit of an inconvenience. Belt drives are efficient too, just need the gearing range etc. I'm surprised there are not more options. We had a couple of belt drive kids bikes and they were great for maintenance.
#34
Senior Member
Join Date: Sep 2008
Posts: 786
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 483 Post(s)
Liked 282 Times
in
158 Posts
Don't discount one of the primary, if not, the primary drivers in attracting customers in this category – aesthetics. I'll admit the dropped seat stays simply look better. Part of it may be that they make the saddle look higher – and that makes it look like a pro's bike and that make it makes it look like… yeah - aesthetics.
#35
OM boy
Thread Starter
Join Date: Jul 2005
Location: Goleta CA
Posts: 4,439
Bikes: a bunch
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 547 Post(s)
Liked 698 Times
in
464 Posts
Just from the 'heft' test, bike weight seems about the same as a Mid-level CF bike. He's solid middle of pack rider and has no issues on the climbs...
The bike is wonderfully silent and he always seems to have the 'right' gear for the occasion ... I'll have to take a pic and post, when we're both on the next ride...
Between Ski season (WInter lasts until Mid April in the SIerra and Mammoth stays open usually to well past May- last year End of July) and now the Best times to hike in our Back Country, I've been missing the Sunday Rides... The Back Country will soon turn into an Oven, and Sunday Coastal Rides will seem like heaven (which they are...).
Ride On
Yuri
Likes For cyclezen:
#36
Senior Member
Join Date: May 2021
Posts: 8,771
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 4579 Post(s)
Liked 5,120 Times
in
3,162 Posts
Don't discount one of the primary, if not, the primary drivers in attracting customers in this category – aesthetics. I'll admit the dropped seat stays simply look better. Part of it may be that they make the saddle look higher – and that makes it look like a pro's bike and that make it makes it look like… yeah - aesthetics.
Likes For PeteHski:
#37
Senior Member
Join Date: May 2021
Posts: 8,771
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 4579 Post(s)
Liked 5,120 Times
in
3,162 Posts
There's a rider in our Sunday group, aussie, who had a custom TI frame made, built up the rest himself, using an IGH and belt drive, otherwise upper level road components...
Just from the 'heft' test, bike weight seems about the same as a Mid-level CF bike. He's solid middle of pack rider and has no issues on the climbs...
The bike is wonderfully silent and he always seems to have the 'right' gear for the occasion ... I'll have to take a pic and post, when we're both on the next ride...
Between Ski season (WInter lasts until Mid April in the SIerra and Mammoth stays open usually to well past May- last year End of July) and now the Best times to hike in our Back Country, I've been missing the Sunday Rides... The Back Country will soon turn into an Oven, and Sunday Coastal Rides will seem like heaven (which they are...).
Ride On
Yuri
Just from the 'heft' test, bike weight seems about the same as a Mid-level CF bike. He's solid middle of pack rider and has no issues on the climbs...
The bike is wonderfully silent and he always seems to have the 'right' gear for the occasion ... I'll have to take a pic and post, when we're both on the next ride...
Between Ski season (WInter lasts until Mid April in the SIerra and Mammoth stays open usually to well past May- last year End of July) and now the Best times to hike in our Back Country, I've been missing the Sunday Rides... The Back Country will soon turn into an Oven, and Sunday Coastal Rides will seem like heaven (which they are...).
Ride On
Yuri
Likes For PeteHski:
#38
Senior Member
Having read a fair amount of reviews (and presuming those authors have read the marketing bumpfs), it sounds like the modern frame double diamond design is driven more by aerodynamics than comfort:
- Flat top tubes present the smallest forward aspect relative to any sloping top tube design
- Dropped seatstays put the seatstay/seat tube joint right in front of the top of the tire, where the air is already being spoiled anyway, rather than higher up, which adds to its own drag
- Standard for these days D-shaped seat and down tubes
Comfort is thrown in by way of wide tires, flexy seatposts, and odd suspension designs (ahem, Roubaix and Domane). The ‘default’ race design these days (as outlined above) doesn’t really provide for inherent comfort due to the lower amount of exposed post (flat top tube) and tight rear triangle (dropped stays). An argument could be made that the seat tube itself could be made to flex at the seat stay joint, but any flex there would also impact the top tube and head tube joint as the seat tube bends and effectively shortens that side of the triangle.
So short version… first conclusion: dropped seat stays and flat top tubes are for aero, not comfort.
Of course, regardless of whether your stays are high up or low down, this all happens behind a rider’s thighs and feet, which cause plenty of airflow disruption of their own anyway. Manufacturers are trying to tell us that an extra three inches of half-inch wide seat stay will provide meaningfully more drag, even though it’s primarily in the wash of my 7” diameter thighs and size 10 shoes as they go round and round? Sure, when the absolute most marginal race gains are to be considered, the tiniest fraction of a watt and handful of grams that a shorter stay provides could prove beneficial - or at least, matching what the big boys do is good for optics, both at the start line and on the showroom floor. After all, when Specialized shows up with its new Tarmac, Bianchi and BMC can’t be seen putting "last year’s” technology out there.
Short version, conclusion 2: Marketing wants to make sure our new bike doesn’t look old next to the other guy’s new bike
- Flat top tubes present the smallest forward aspect relative to any sloping top tube design
- Dropped seatstays put the seatstay/seat tube joint right in front of the top of the tire, where the air is already being spoiled anyway, rather than higher up, which adds to its own drag
- Standard for these days D-shaped seat and down tubes
Comfort is thrown in by way of wide tires, flexy seatposts, and odd suspension designs (ahem, Roubaix and Domane). The ‘default’ race design these days (as outlined above) doesn’t really provide for inherent comfort due to the lower amount of exposed post (flat top tube) and tight rear triangle (dropped stays). An argument could be made that the seat tube itself could be made to flex at the seat stay joint, but any flex there would also impact the top tube and head tube joint as the seat tube bends and effectively shortens that side of the triangle.
So short version… first conclusion: dropped seat stays and flat top tubes are for aero, not comfort.
Of course, regardless of whether your stays are high up or low down, this all happens behind a rider’s thighs and feet, which cause plenty of airflow disruption of their own anyway. Manufacturers are trying to tell us that an extra three inches of half-inch wide seat stay will provide meaningfully more drag, even though it’s primarily in the wash of my 7” diameter thighs and size 10 shoes as they go round and round? Sure, when the absolute most marginal race gains are to be considered, the tiniest fraction of a watt and handful of grams that a shorter stay provides could prove beneficial - or at least, matching what the big boys do is good for optics, both at the start line and on the showroom floor. After all, when Specialized shows up with its new Tarmac, Bianchi and BMC can’t be seen putting "last year’s” technology out there.
Short version, conclusion 2: Marketing wants to make sure our new bike doesn’t look old next to the other guy’s new bike
#40
Senior Member
Join Date: May 2021
Posts: 8,771
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 4579 Post(s)
Liked 5,120 Times
in
3,162 Posts
#41
Brisvegas roadie
Join Date: Jul 2023
Location: Brisbane, Australia
Posts: 64
Bikes: 2013 Trek Domane 6.9 (SRAM Red-22), 2010 Colnago CLX 2.0 (SRAM Red 10-speed mix), 2013 Pinarello FP Uno (Campagnolo Athena 11-speed), 2009 Fuji Roubaix Pro (Shimano 105 10-speed), 2009 Colnago EPS (dream build, under construction!)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 27 Post(s)
Liked 21 Times
in
14 Posts
Just a comment on dropped seat stays, or no seat stays at all. Yes there are the questions of aero, compliance etc, but there's also the question of torsional frame rigidity. If you removed the seat stays all together or had radically dropped seat stays, all other thihgs being equal the frame is going to lose torsional rigidity. Fine if you're riding in a straight line but not so good if you want to go around corners.
#42
Thread Killer
Join Date: Aug 2008
Location: Ann Arbor, MI
Posts: 12,519
Bikes: 15 Kinesis Racelight 4S, 76 Motebecane Gran Jubilée, 17 Dedacciai Gladiatore2, 12 Breezer Venturi, 09 Dahon Mariner, 12 Mercier Nano, 95 DeKerf Team SL, 19 Tern Rally, 21 Breezer Doppler Cafe+, 19 T-Lab X3, 91 Serotta CII, 23 3T Strada
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 3216 Post(s)
Liked 1,755 Times
in
1,059 Posts
Just a comment on dropped seat stays, or no seat stays at all. Yes there are the questions of aero, compliance etc, but there's also the question of torsional frame rigidity. If you removed the seat stays all together or had radically dropped seat stays, all other thihgs being equal the frame is going to lose torsional rigidity. Fine if you're riding in a straight line but not so good if you want to go around corners.
#43
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,580
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 2603 Post(s)
Liked 3,133 Times
in
1,783 Posts
My guess: different seat stay configurations differ only minimally, and maybe not at all, with respect to power transmission, vertical compliance, etc. That seat stays are still used for carbon frames is probably down to UCI mandates.
For your reading pleasure:
UCI regulations for racing bike frame designs
For your reading pleasure:
UCI regulations for racing bike frame designs
#44
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,580
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 2603 Post(s)
Liked 3,133 Times
in
1,783 Posts
Just a comment on dropped seat stays, or no seat stays at all. Yes there are the questions of aero, compliance etc, but there's also the question of torsional frame rigidity. If you removed the seat stays all together or had radically dropped seat stays, all other thihgs being equal the frame is going to lose torsional rigidity. Fine if you're riding in a straight line but not so good if you want to go around corners.
![](https://cdn.mos.cms.futurecdn.net/RXwyQchKVFsvs5bQmp5Ujj-415-80.jpg)
Last edited by Trakhak; 05-15-24 at 07:44 AM.
#45
Brisvegas roadie
Join Date: Jul 2023
Location: Brisbane, Australia
Posts: 64
Bikes: 2013 Trek Domane 6.9 (SRAM Red-22), 2010 Colnago CLX 2.0 (SRAM Red 10-speed mix), 2013 Pinarello FP Uno (Campagnolo Athena 11-speed), 2009 Fuji Roubaix Pro (Shimano 105 10-speed), 2009 Colnago EPS (dream build, under construction!)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 27 Post(s)
Liked 21 Times
in
14 Posts
https://www.cyclist.co.uk/in-depth/bike-frame-stiffness
#46
Brisvegas roadie
Join Date: Jul 2023
Location: Brisbane, Australia
Posts: 64
Bikes: 2013 Trek Domane 6.9 (SRAM Red-22), 2010 Colnago CLX 2.0 (SRAM Red 10-speed mix), 2013 Pinarello FP Uno (Campagnolo Athena 11-speed), 2009 Fuji Roubaix Pro (Shimano 105 10-speed), 2009 Colnago EPS (dream build, under construction!)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 27 Post(s)
Liked 21 Times
in
14 Posts
#47
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,580
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 2603 Post(s)
Liked 3,133 Times
in
1,783 Posts
Yes. TT riders do high-speed cornering, sometimes on very hilly courses (see. e.g., Olympic and World Championship time trial courses over the years), accelerate out of corners, etc. The differences between TT bikes and road and track bikes with respect to the forces the frames are subjected to are inconsequential for well-designed carbon frames.
The UCI didn't ban bikes without seat stays because they were concerned that handling would be affected. They banned them because they were obviously designed to circumvent the restrictions on changes made purely to improve aerodynamics. And under their blanket policy that bikes should look like bikes, dammit.
The UCI didn't ban bikes without seat stays because they were concerned that handling would be affected. They banned them because they were obviously designed to circumvent the restrictions on changes made purely to improve aerodynamics. And under their blanket policy that bikes should look like bikes, dammit.
#48
Brisvegas roadie
Join Date: Jul 2023
Location: Brisbane, Australia
Posts: 64
Bikes: 2013 Trek Domane 6.9 (SRAM Red-22), 2010 Colnago CLX 2.0 (SRAM Red 10-speed mix), 2013 Pinarello FP Uno (Campagnolo Athena 11-speed), 2009 Fuji Roubaix Pro (Shimano 105 10-speed), 2009 Colnago EPS (dream build, under construction!)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 27 Post(s)
Liked 21 Times
in
14 Posts
Yes. TT riders do high-speed cornering, sometimes on very hilly courses (see. e.g., Olympic and World Championship time trial courses over the years), accelerate out of corners, etc. The differences between TT bikes and road and track bikes with respect to the forces the frames are subjected to are inconsequential for well-designed carbon frames.
The UCI didn't ban bikes without seat stays because they were concerned that handling would be affected. They banned them because they were obviously designed to circumvent the restrictions on changes made purely to improve aerodynamics. And under their blanket policy that bikes should look like bikes, dammit.
The UCI didn't ban bikes without seat stays because they were concerned that handling would be affected. They banned them because they were obviously designed to circumvent the restrictions on changes made purely to improve aerodynamics. And under their blanket policy that bikes should look like bikes, dammit.
#49
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,580
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 2603 Post(s)
Liked 3,133 Times
in
1,783 Posts
I'm not here to defend the UCI. The OP asked a genuine question about design considerations for seat stays. A lot of people responded with observations about vertical stiffness vs compliance, which is one of the main considerations of bike frame design. Another is torsional stiffness, which is one key reason for having seat stays, unless you have an unlimited budget for exotic materials etc . Yes, you can go around corners on a TT bike, but you can also do a TT on a 'regular' road bike. A TT bike is optimised for aerodynamic efficiency and compromises for handling, weight etc. Other bikes are optimised for say climbing, sprinting or endurance/comfort, while compromising for aero and other factors. This is before considering the budget of the everyday cyclist. There's no one single bike design (or any other mechanical device for that matter) that's optimised for every different purpose and every budget. This is an objective observation of reality.
And note that that Lotus is missing not just seat stays but also a down tube. Heat diagrams have shown that the down tube is one of the most stressed elements in a bike frame (and that seat stays are the least stressed).
And then there are Slingshot bikes, beloved of our own SpeedOfLite. I wouldn't have believed those bikes could be ridden 100 yards without collapsing, but there they are. Maybe that's what started me on the path of skepticism regarding received wisdom about bike frame designs. (I know, for instance, that my aluminum bikes are no different from my steel bikes with respect to riding comfort.)
#50
Brisvegas roadie
Join Date: Jul 2023
Location: Brisbane, Australia
Posts: 64
Bikes: 2013 Trek Domane 6.9 (SRAM Red-22), 2010 Colnago CLX 2.0 (SRAM Red 10-speed mix), 2013 Pinarello FP Uno (Campagnolo Athena 11-speed), 2009 Fuji Roubaix Pro (Shimano 105 10-speed), 2009 Colnago EPS (dream build, under construction!)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 27 Post(s)
Liked 21 Times
in
14 Posts
All true. I was addressing the suggestion that bikes missing seat stays would be inferior in some way to those with seat stays - full length, mid-seat-tube length, or vestigial. I know of no evidence showing that seat stays are needed for any modern (carbon fiber) bike, regardless of application. ("It's obvious!" doesn't count.)
And note that that Lotus is missing not just seat stays but also a down tube. Heat diagrams have shown that the down tube is one of the most stressed elements in a bike frame (and that seat stays are the least stressed).
And then there are Slingshot bikes, beloved of our own SpeedOfLite. I wouldn't have believed those bikes could be ridden 100 yards without collapsing, but there they are. Maybe that's what started me on the path of skepticism regarding received wisdom about bike frame designs. (I know, for instance, that my aluminum bikes are no different from my steel bikes with respect to riding comfort.)
And note that that Lotus is missing not just seat stays but also a down tube. Heat diagrams have shown that the down tube is one of the most stressed elements in a bike frame (and that seat stays are the least stressed).
And then there are Slingshot bikes, beloved of our own SpeedOfLite. I wouldn't have believed those bikes could be ridden 100 yards without collapsing, but there they are. Maybe that's what started me on the path of skepticism regarding received wisdom about bike frame designs. (I know, for instance, that my aluminum bikes are no different from my steel bikes with respect to riding comfort.)