Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Campagnolo self-extracting bolt removal tool...

Search
Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Campagnolo self-extracting bolt removal tool...

Thread Tools
 
Search this Thread
 
Old 05-14-24, 08:55 PM
  #26  
JohnDThompson 
Old fart
 
JohnDThompson's Avatar
 
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,844

Bikes: Several, mostly not name brands.

Mentioned: 154 Post(s)
Tagged: 0 Thread(s)
Quoted: 3617 Post(s)
Liked 3,454 Times in 1,960 Posts
Originally Posted by SurferRosa
... and Americans and Japanese ...
Both use standard English thread: 1.370 x 24 tpi
JohnDThompson is offline  
Old 05-14-24, 10:23 PM
  #27  
FBinNY 
Senior Member
 
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 39,061

Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter

Mentioned: 141 Post(s)
Tagged: 1 Thread(s)
Quoted: 5976 Post(s)
Liked 2,883 Times in 1,604 Posts
Originally Posted by SurferRosa
I was following your response about fixed cup thread direction, not pitch/tpi.
It's a package deal, testimony to the long term British dominance of the global bike trade.
__________________
FB
Chain-L site

An ounce of diagnosis is worth a pound of cure.

Just because I'm tired of arguing, doesn't mean you're right.

“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN

WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FBinNY is offline  
Old 05-15-24, 04:28 AM
  #28  
Jared Purdy
Newbie
Thread Starter
 
Join Date: Nov 2021
Posts: 25
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 13 Post(s)
Liked 10 Times in 6 Posts
Yes, I'm aware that it's reverse thread. Also, that Park Tool doesn't work. The pins are the right size. Too big. I know, I have one. That being said, I have one of the Campy bolt extractors. Cheers.
Jared Purdy is offline  
Old 05-16-24, 04:48 PM
  #29  
Kontact
Senior Member
 
Kontact's Avatar
 
Join Date: Apr 2011
Posts: 7,373
Mentioned: 43 Post(s)
Tagged: 0 Thread(s)
Quoted: 4597 Post(s)
Liked 1,754 Times in 1,148 Posts
Originally Posted by Jared Purdy
Yes, I'm aware that it's reverse thread. Also, that Park Tool doesn't work. The pins are the right size. Too big. I know, I have one. That being said, I have one of the Campy bolt extractors. Cheers.
The Park tool with the red handles is too big?
Kontact is offline  
Old 05-16-24, 06:53 PM
  #30  
Jared Purdy
Newbie
Thread Starter
 
Join Date: Nov 2021
Posts: 25
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 13 Post(s)
Liked 10 Times in 6 Posts
Yes, the pins aren't the right size. Too big.
Jared Purdy is offline  
Likes For Jared Purdy:
Old 05-16-24, 07:11 PM
  #31  
grumpus
Senior Member
 
grumpus's Avatar
 
Join Date: Apr 2016
Posts: 1,428
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 565 Post(s)
Liked 504 Times in 383 Posts
Originally Posted by Kontact
This forum is just choked with the half-baked musings of people that can't be bothered to think through their own ideas. And then everyone else ends up having to deal with nonsense stated as fact about how bikes work, some of which will get repeated until somebody actually believes it.
Isn't that just like life in general?
grumpus is offline  
Old 05-16-24, 07:25 PM
  #32  
Kontact
Senior Member
 
Kontact's Avatar
 
Join Date: Apr 2011
Posts: 7,373
Mentioned: 43 Post(s)
Tagged: 0 Thread(s)
Quoted: 4597 Post(s)
Liked 1,754 Times in 1,148 Posts
Originally Posted by grumpus
Isn't that just like life in general?
I was talking about Bicycle Mechanics subforum - which should be a place you can get solid, factual information.

We already have the Advocacy and Safety sub for people who like to talk about how things should be, rather than are.
Kontact is offline  
Old 05-17-24, 07:55 AM
  #33  
grumpus
Senior Member
 
grumpus's Avatar
 
Join Date: Apr 2016
Posts: 1,428
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 565 Post(s)
Liked 504 Times in 383 Posts
Originally Posted by Kontact
I was talking about Bicycle Mechanics subforum - which should be a place you can get solid, factual information.

We already have the Advocacy and Safety sub for people who like to talk about how things should be, rather than are.
"should be a place you can get solid, factual information" ... "talk about how things should be" ...
I'll see you there. 😁
grumpus is offline  
Old 05-17-24, 08:13 AM
  #34  
Hondo6
Senior Member
 
Join Date: Sep 2021
Location: SW Florida, USA
Posts: 1,316

Bikes: Yes

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 567 Post(s)
Liked 707 Times in 477 Posts
Originally Posted by Jared Purdy
Yes, the pins aren't the right size. Too big.
Out of curiosity, if you don't mind: just what is the pin/hole diameter on the tool for removing that particular Campagnolo part?
Hondo6 is offline  
Old 05-17-24, 05:18 PM
  #35  
FBinNY 
Senior Member
 
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 39,061

Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter

Mentioned: 141 Post(s)
Tagged: 1 Thread(s)
Quoted: 5976 Post(s)
Liked 2,883 Times in 1,604 Posts
Originally Posted by Hondo6
Out of curiosity, if you don't mind: just what is the pin/hole diameter on the tool for removing that particular Campagnolo part?
I never measured them, but speaking from visual memory, they're roughly 1mm.

As I posted earlier, I used circling pliers made for smaller circlips.
__________________
FB
Chain-L site

An ounce of diagnosis is worth a pound of cure.

Just because I'm tired of arguing, doesn't mean you're right.

“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN

WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FBinNY is offline  
Old 05-18-24, 02:49 AM
  #36  
gearbasher
Senior Member
 
gearbasher's Avatar
 
Join Date: May 2009
Location: Sitting on my butt in front of a computer
Posts: 1,593
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 469 Post(s)
Liked 963 Times in 401 Posts
Originally Posted by Hondo6
Out of curiosity, if you don't mind: just what is the pin/hole diameter on the tool for removing that particular Campagnolo part?
Measuring the one I have: Pins are 1.6 mm and are spaced 18 mm apart c-t-c.

Last edited by gearbasher; 05-18-24 at 03:54 AM.
gearbasher is offline  
Likes For gearbasher:
Old 05-29-24, 04:16 PM
  #37  
Jared Purdy
Newbie
Thread Starter
 
Join Date: Nov 2021
Posts: 25
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 13 Post(s)
Liked 10 Times in 6 Posts
I'm not sure. Haven't measured them. They are very small, and likely explains one of the reasons why Campag ceased that design! I suspect they can easily snap off, rendering the tool useless. Of course you could always drill the holes larger and use the BB spanner tool.
Jared Purdy is offline  
Old 06-04-24, 11:54 AM
  #38  
Hondo6
Senior Member
 
Join Date: Sep 2021
Location: SW Florida, USA
Posts: 1,316

Bikes: Yes

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 567 Post(s)
Liked 707 Times in 477 Posts
Originally Posted by FBinNY
I never measured them, but speaking from visual memory, they're roughly 1mm.

As I posted earlier, I used circling pliers made for smaller circlips.
Originally Posted by gearbasher
Measuring the one I have: Pins are 1.6 mm and are spaced 18 mm apart c-t-c.
Thanks to both of you for the info.

Sorry for the delayed reply; been busy and traveling - and thus away from BF for a while.
Hondo6 is offline  
Old 06-04-24, 05:07 PM
  #39  
FBinNY 
Senior Member
 
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 39,061

Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter

Mentioned: 141 Post(s)
Tagged: 1 Thread(s)
Quoted: 5976 Post(s)
Liked 2,883 Times in 1,604 Posts
Originally Posted by hondo6
.....

Sorry for the delayed reply; been busy and traveling - and thus away from bf for a while.
what !!!!!!?
__________________
FB
Chain-L site

An ounce of diagnosis is worth a pound of cure.

Just because I'm tired of arguing, doesn't mean you're right.

“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN

WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FBinNY is offline  
Old 06-04-24, 06:13 PM
  #40  
grumpus
Senior Member
 
grumpus's Avatar
 
Join Date: Apr 2016
Posts: 1,428
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 565 Post(s)
Liked 504 Times in 383 Posts
Originally Posted by FBinNY
what !!!!!!?
Bike Forums
grumpus is offline  
Old 06-04-24, 06:43 PM
  #41  
Hondo6
Senior Member
 
Join Date: Sep 2021
Location: SW Florida, USA
Posts: 1,316

Bikes: Yes

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 567 Post(s)
Liked 707 Times in 477 Posts
Originally Posted by grumpus
Bike Forums
Yep. Sorry about the missed capitalization.
Hondo6 is offline  
Old 06-04-24, 06:49 PM
  #42  
FBinNY 
Senior Member
 
Join Date: Apr 2009
Location: New Rochelle, NY
Posts: 39,061

Bikes: too many bikes from 1967 10s (5x2)Frejus to a Sumitomo Ti/Chorus aluminum 10s (10x2), plus one non-susp mtn bike I use as my commuter

Mentioned: 141 Post(s)
Tagged: 1 Thread(s)
Quoted: 5976 Post(s)
Liked 2,883 Times in 1,604 Posts
Originally Posted by Hondo6
Yep. Sorry about the missed capitalization.
No apology needed.

I think people failed to "see" my tongue firmly in my cheek when I posted "WHAT!!!!?", referencing the very idea of being away from the forum.
__________________
FB
Chain-L site

An ounce of diagnosis is worth a pound of cure.

Just because I'm tired of arguing, doesn't mean you're right.

“One accurate measurement is worth a thousand expert opinions” - Adm Grace Murray Hopper - USN

WARNING, I'm from New York. Thin skinned people should maintain safe distance.
FBinNY is offline  
Likes For FBinNY:
Old 06-04-24, 06:53 PM
  #43  
Hondo6
Senior Member
 
Join Date: Sep 2021
Location: SW Florida, USA
Posts: 1,316

Bikes: Yes

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 567 Post(s)
Liked 707 Times in 477 Posts
Originally Posted by FBinNY
No apology needed.

I think people failed to "see" my tongue firmly in my cheek when I posted "WHAT!!!!?", referencing the very idea of being away from the forum.
Unfortunately, life interferes with leisure sometimes.
Hondo6 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.