On the Road Again Project Challenges - Again
#26
Full Member
Join Date: Sep 2020
Location: Sacramento, CA
Posts: 422
Bikes: 2017 Sage Skyline, 2015 Co-Motion Periscope Tandem, 2012 Soma Smoothie, 2006 Kona Jake, 1978 Richard Sachs, 1977 Peugeot UO18c, 1977 Peugeot PRN10, 1974 Allegro Schweitzermeister Model 76, 1972 Hugo Rickert Spezial, 1971 Fuji Finest
Liked 643 Times
in
201 Posts
From the frame up Fuji Finest
This project started after I acquired a mystery frame from my friend Addison after he closed the Bicycle Repairium in Sacramento. There was a thread on this where the BF hive mind helped me identify the frame as a June 1971 Fuji Finest.
This is a true from the frame up project after I stripped it down to bare metal and have been acquiring parts and building it up. Spent the last couple of weeks building wheels for it, painting the frame and applying period and model accurate water slide decals from Gus Salmon. Letting the decals cure for a few days and then it is time for the 2k clear coat. Here is a sneak preview:
Frame as received from Addison.
After media blasting.
Found a head badge that matched the rivet holes in the head tube
Tracked down a Fuji branded Belt saddle
Some assembly required!
Primer coat done!
Finished the wheel build.
First coat of paint.
Hade enough left over to paint a matching set of fenders.
This is a true from the frame up project after I stripped it down to bare metal and have been acquiring parts and building it up. Spent the last couple of weeks building wheels for it, painting the frame and applying period and model accurate water slide decals from Gus Salmon. Letting the decals cure for a few days and then it is time for the 2k clear coat. Here is a sneak preview:
Frame as received from Addison.
After media blasting.
Found a head badge that matched the rivet holes in the head tube
Tracked down a Fuji branded Belt saddle
Some assembly required!
Primer coat done!
Finished the wheel build.
First coat of paint.
Hade enough left over to paint a matching set of fenders.
#27
Edumacator
Join Date: Jan 2018
Location: Goose Creek, SC
Posts: 7,135
Bikes: '87 Crestdale, '87 Basso Gap, '92 Rossin Performance EL-OS, 1990 VanTuyl, 1980s Losa, 1985 Trek 670, 1982 AD SLE, 1987 PX10, etc...
Liked 3,374 Times
in
2,115 Posts
Awesome job on that Fuji!
__________________
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
1987 Crest Cannondale, 1987 Basso Gap, 1992 Rossin Performance EL, 1990ish Van Tuyl, 1985 Trek 670, 2003 Pinarello Surprise, 1990ish MBK Atlantique, 1987 Peugeot Competition, 1987 Nishiki Tri-A, 1981 Faggin, 1996 Cannondale M500, 1984 Mercian, 1982 AD SuperLeicht, 1985 Massi (model unknown), 1988 Daccordi Griffe , 1989 Fauxsin MTB, 1981 Ciocc Mockba, 1992 Bianchi Giro, 1977 Colnago Super, 1971 Raleigh International, 1998 Corratec Ap & Dun, 1991 Peugeot Slimestone
#28
Senior Member
Well I finished hooking it up and it stops the bike, so I guess I'll stick with it for now. I am not sure I want to go the centerpull route it would just look even funnier to me.
My next question is, what common vintage rear derailleur can work with a 9 speed cassette? I tried a cyclone mk-II long cage and it only goes up to the 8th cog (2nd gear). I think the cable is tight enough, and the adjustment screw is all the way out. The shifter is a Shimano BS50 in friction mode. I have a deore dx somewhere, would that work? Or is it the shifter? This is actually the first time I've tried anything over 7 cogs, so I've no clue.
Alternatively, if I use a smaller cassette such as a 7 or 8 speed, would I need to stick a spacer on the hub? Or no?
My next question is, what common vintage rear derailleur can work with a 9 speed cassette? I tried a cyclone mk-II long cage and it only goes up to the 8th cog (2nd gear). I think the cable is tight enough, and the adjustment screw is all the way out. The shifter is a Shimano BS50 in friction mode. I have a deore dx somewhere, would that work? Or is it the shifter? This is actually the first time I've tried anything over 7 cogs, so I've no clue.
Alternatively, if I use a smaller cassette such as a 7 or 8 speed, would I need to stick a spacer on the hub? Or no?
An easy test: with the bike on a repair stand, turn the cranks with your right hand while pushing the bottom of the rear derailleur parallelogram inward with your left hand. With the inner-limit screw backed out all the way, the chain should easily reach the cassette's largest cog. (Be careful not to overshoot and push the chain into the spokes!)
If the chain does indeed reach the largest cog, that tells you that the problem would likely be solved by replacing the index/friction shifter with a shifter from the pre-indexing era.
Last edited by Trakhak; 04-22-24 at 06:03 AM.
#29
Senior Member
one can only wonder how the heck they got him mounted up thar!
unlikely to have been helicopters extant at that epoch...
perhaps ein kranischer gigante
-----
#30
Senior Member
I'm thinking of participating in this challenge so I started looking for suitable candidates. I came across a FB Marketplace ad for a "Burleigh road bicycle". I've come up empty trying to find information on this bike. Has anyone ever seen or heard of this bike before? Is it bike shop quality or was it sold at Toys R Us in 1970s? It appears to have a lugged frame and there is a downtube sticker that says "Chrome Molybdenum".
Here are a couple of images from the ad:
Here are a couple of images from the ad:
-----
Ach Du lederkrans!
Krautkraft im farben.
Perchance a perpetration of someone such as Kalkhoff...
-----
Last edited by juvela; 04-22-24 at 10:21 AM. Reason: spellin'
#31
Senior Member
Join Date: Aug 2015
Location: Delaware Sea Shore
Posts: 548
Bikes: There is always room for one more.
Liked 403 Times
in
232 Posts
Tearing Down the Ross
I dismantled the Ross yesterday, cleaned the frame and components and applied a light coat of boiled linseed oil to the frame this morning.
Ross frame and fork wiped down with boiled linseed oil.
No polishing - just a basic cleaning.
During the tear down I determined a new headset, chain and rim strips were needed. Mucho Cheapo of course. I would normally opt for rim tape but there is that budget to consider.
Expenses so far:
Mucho Cheapo Ross - $10.00
Mucho Cheapo Neco headset - $9.90
Mucho Cheapo 7-speed chain - $9.96
Mucho Cheapo Amazon rim strips - $7.49
Mucho Cheapo expenses to date - $37.35
Ross frame and fork wiped down with boiled linseed oil.
No polishing - just a basic cleaning.
During the tear down I determined a new headset, chain and rim strips were needed. Mucho Cheapo of course. I would normally opt for rim tape but there is that budget to consider.
Expenses so far:
Mucho Cheapo Ross - $10.00
Mucho Cheapo Neco headset - $9.90
Mucho Cheapo 7-speed chain - $9.96
Mucho Cheapo Amazon rim strips - $7.49
Mucho Cheapo expenses to date - $37.35
__________________
Don
Don
Likes For GeezyRider:
#32
StillNewbieButInGrey
Join Date: Feb 2024
Location: Wayne county, TN
Posts: 248
Bikes: 1982 Austro Daimler SLE, Eastern Alpaka 29er
Liked 209 Times
in
106 Posts
Can I play? Frame up.
Started with 1982 AD SLE frame and fork with Tange headset.
Has shimano Hubs, freewheel, RD,crankset, BB,chainrings, brakes, levers,and shifters.
Suntour ARX FD
Araya rims
BELLERI St. Etienne Bars with ATAX quill stem.
Galli Mallard pedals
Continetal ultra sport tires
ANPI seat post.
Has shimano Hubs, freewheel, RD,crankset, BB,chainrings, brakes, levers,and shifters.
Suntour ARX FD
Araya rims
BELLERI St. Etienne Bars with ATAX quill stem.
Galli Mallard pedals
Continetal ultra sport tires
ANPI seat post.
Likes For Strawbunyan:
#33
Newbie
Join Date: Mar 2020
Location: New Hampshire
Posts: 59
Bikes: Raleighs (International, Super Tourer, Gran Sport, Super Course), Miyatas (610, Alumicross), Bianchi Eros, Fuji Cross Pro, Lotus Excelle, Paramount Series 7 Carbon, Univega Super Strada, Wheeler Tremosine,
Liked 62 Times
in
25 Posts
re (It started with a part) I just had-to-get one of those 3-pulley derailleurs last November!
Likes For darnet:
#34
...
Join Date: Oct 2021
Location: Whitestone and Rensselaerville, New York
Posts: 1,589
Bikes: Bicycles? Yup.
Liked 1,717 Times
in
780 Posts
Yup, the 2024 build is going to be weird, since it started that way.
A Swedish bike with French BB and ISO steerer. High quality tubes (Vitus 971) and lugs, yet crudely assembled.
The horrible paint removal of this tough stuff is nearly done. Next is the braze-ons; bottle cage mounts, shifter bosses, cable stop under the chainstay, and housing covers for internal routing of the rear brake cable.
Cresent Pepita 318
A Swedish bike with French BB and ISO steerer. High quality tubes (Vitus 971) and lugs, yet crudely assembled.
The horrible paint removal of this tough stuff is nearly done. Next is the braze-ons; bottle cage mounts, shifter bosses, cable stop under the chainstay, and housing covers for internal routing of the rear brake cable.
Cresent Pepita 318
Likes For BTinNYC:
#35
PeopleCode delaminator
Clarification needed...
I've stalled out on this heap over multiple Clunker challenges:
The frame was picked out of a trash heap and the wheelset was $25.
EDIT: While I think I can bring it in under the mucho-cheapo budget the result will fit MUCH better in Frankenbike
I've stalled out on this heap over multiple Clunker challenges:
The frame was picked out of a trash heap and the wheelset was $25.
EDIT: While I think I can bring it in under the mucho-cheapo budget the result will fit MUCH better in Frankenbike
Likes For RandolphCarter:
#37
Newbie
Join Date: Mar 2020
Location: New Hampshire
Posts: 59
Bikes: Raleighs (International, Super Tourer, Gran Sport, Super Course), Miyatas (610, Alumicross), Bianchi Eros, Fuji Cross Pro, Lotus Excelle, Paramount Series 7 Carbon, Univega Super Strada, Wheeler Tremosine,
Liked 62 Times
in
25 Posts
I'm in! I guess I'll go for the "mucho cheapo" category again, although I'm going to feel a little bad because I know I'll be replacing some stuff with parts that have been in my possession for quite some time which adds $0 to the total.
Anyway....
I picked up a Motobecane Grand Record at the local bike thrift store a a couple weeks ago for $37.50 ($35 plus tax).
As purchased, loaded up at the thrift store:
Here is a "before" pic:
The only thing I've done to it up to this point was air up the extremely dry rotted tires and rode up and down my short driveway a couple times. I also gave hardware and some components some lube, in preparation for teardown during The Challenge timeframe. I'm happy The Challenge has begun, because I've been itching to get working on this.
I began disassembling some things today, the rack was the first thing to go!
Anyway....
I picked up a Motobecane Grand Record at the local bike thrift store a a couple weeks ago for $37.50 ($35 plus tax).
As purchased, loaded up at the thrift store:
Here is a "before" pic:
The only thing I've done to it up to this point was air up the extremely dry rotted tires and rode up and down my short driveway a couple times. I also gave hardware and some components some lube, in preparation for teardown during The Challenge timeframe. I'm happy The Challenge has begun, because I've been itching to get working on this.
I began disassembling some things today, the rack was the first thing to go!
Looks a bit like a bike I found last fall at my town's transfer station re-use table (except for it's a Huffy; might be my ride this year). Pics as-found, plus bonus pic of re-use table from up above....
Likes For darnet:
#38
Full Member
Join Date: Jul 2023
Location: Idaho, USA
Posts: 253
Bikes: Aluminum and Steel
Liked 461 Times
in
169 Posts
Why not… 1974 Schwinn Continental. Picked it up for $13. Was supposed to be a quick flip. The snowball started rolling with the chrome fork crown cap. The original was cracked. I found one on ebay. I paid a ridiculous $30. Evaporust, Bar Keepers friend, Flitz, clay bar, rubbing compound, liquid carnuba wax, new decals, Schwinn cables/housings, Hunt-Wilde bar tape, etc. I stopped keeping track after $100. Restoration? Close to being on the road again. The most over restored Schwinn on BF for the year award?
__________________
“Ride like the wind boy! Ride like the wind…”
-The Voice inside my head, circa 1982
“Ride like the wind boy! Ride like the wind…”
-The Voice inside my head, circa 1982
Likes For IdahoBrett:
#39
Senior Member
Join Date: Nov 2005
Location: NW Ohio
Posts: 3,483
Bikes: 1984 Miyata 310, 1986 Schwinn Sierra, 2011 Jamis Quest, 1980 Peugeot TH8 Tandem, 1992 Performance Parabola, 1987 Ross Mt. Hood, 1988 Schwinn LeTour, 1988 Trek 400T, 1981 Fuji S12-S LTD, 197? FW Evans
Liked 1,097 Times
in
560 Posts
I wish they had something like that where I live. The closest thing would be the people who set things out by the road a few days before trash day. The township has a large item collection a couple times a year, but everything goes straight in a dumpster. They have one for metal and another one for everything else. A couple weeks ago I was going past the township building while they were having a collection and I spotted a girl's bike hanging off the back of a truck as they turned in. A couple hours later, I was buying one at a flea market to fix up for my niece. It was a '92 Schwinn CrissCross for $20. I was scrambling to get it finished in time for my next trip over there and forgot to get a picture.
Likes For Pompiere:
Likes For BTinNYC:
#41
Señor Member
Thread Starter
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,986
Bikes: Mostly English - predominantly Raleighs
Liked 1,142 Times
in
667 Posts
Clarification needed...
I've stalled out on this heap over multiple Clunker challenges:
...
The frame was picked out of a trash heap and the wheelset was $25.
EDIT: While I think I can bring it in under the mucho-cheapo budget the result will fit MUCH better in Frankenbike
I've stalled out on this heap over multiple Clunker challenges:
...
The frame was picked out of a trash heap and the wheelset was $25.
EDIT: While I think I can bring it in under the mucho-cheapo budget the result will fit MUCH better in Frankenbike
__________________
In search of what to search for.
In search of what to search for.
#42
Señor Member
Thread Starter
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,986
Bikes: Mostly English - predominantly Raleighs
Liked 1,142 Times
in
667 Posts
Why not… 1974 Schwinn Continental. Picked it up for $13. Was supposed to be a quick flip. The snowball started rolling with the chrome fork crown cap. The original was cracked. I found one on ebay. I paid a ridiculous $30. Evaporust, Bar Keepers friend, Flitz, clay bar, rubbing compound, liquid carnuba wax, new decals, Schwinn cables/housings, Hunt-Wilde bar tape, etc. I stopped keeping track after $100. Restoration? Close to being on the road again. The most over restored Schwinn on BF for the year award?
That's not the absolute best condition that I've seen one of those in, but it's close to it.
__________________
In search of what to search for.
In search of what to search for.
Likes For USAZorro:
#43
Full Member
Join Date: Sep 2020
Location: Sacramento, CA
Posts: 422
Bikes: 2017 Sage Skyline, 2015 Co-Motion Periscope Tandem, 2012 Soma Smoothie, 2006 Kona Jake, 1978 Richard Sachs, 1977 Peugeot UO18c, 1977 Peugeot PRN10, 1974 Allegro Schweitzermeister Model 76, 1972 Hugo Rickert Spezial, 1971 Fuji Finest
Liked 643 Times
in
201 Posts
More Progress on the Fuji Finest
Frame is now ready for the build. In checking the frame before the final polish, I found that it needed to be cold set back to 120 from 126 and the hangar needed to be aligned. Pretty happy with how it came out. I’m no Jack Trumbull but this came out pretty sharp for a rattle can job. Good prep and a lot of sanding makes all the difference.
Likes For Sactown_Albert:
#45
Senior Member
Join Date: Aug 2015
Location: Delaware Sea Shore
Posts: 548
Bikes: There is always room for one more.
Liked 403 Times
in
232 Posts
Frame is now ready for the build. In checking the frame before the final polish, I found that it needed to be cold set back to 120 from 126 and the hangar needed to be aligned. Pretty happy with how it came out. I’m no Jack Trumbull but this came out pretty sharp for a rattle can job. Good prep and a lot of sanding makes all the difference.
__________________
Don
Don
#46
Full Member
Join Date: Sep 2020
Location: Sacramento, CA
Posts: 422
Bikes: 2017 Sage Skyline, 2015 Co-Motion Periscope Tandem, 2012 Soma Smoothie, 2006 Kona Jake, 1978 Richard Sachs, 1977 Peugeot UO18c, 1977 Peugeot PRN10, 1974 Allegro Schweitzermeister Model 76, 1972 Hugo Rickert Spezial, 1971 Fuji Finest
Liked 643 Times
in
201 Posts
#47
Full Member
Join Date: Jul 2023
Location: Idaho, USA
Posts: 253
Bikes: Aluminum and Steel
Liked 461 Times
in
169 Posts
I'm not certain if it is an artifact of the camera angle, or whether it's the positioning of the cap, or if the fork is truly a bit cock-eyed, but if you haven't already measured it, it couldn't hurt to check it.
That's not the absolute best condition that I've seen one of those in, but it's close to it.
That's not the absolute best condition that I've seen one of those in, but it's close to it.
Awaiting shipment of the last part. Some more housing for the derailleur cables. No pics from today. But I did set up the brakes. Then I realized I shoulda put the rear rack on first. Oops.
A full body shot from the other day just because:
__________________
“Ride like the wind boy! Ride like the wind…”
-The Voice inside my head, circa 1982
“Ride like the wind boy! Ride like the wind…”
-The Voice inside my head, circa 1982
Likes For IdahoBrett:
#48
The Huffmeister
Join Date: Jul 2008
Location: The Le Grande HQ
Posts: 2,968
Bikes: 1965 dept store special, 1972 basket case, 1978 garden ornament, 1980 garbage heap, 1987 mutt, 1996 frankenstein
Liked 3,820 Times
in
1,538 Posts
Why not… 1974 Schwinn Continental. Picked it up for $13. Was supposed to be a quick flip. The snowball started rolling with the chrome fork crown cap. The original was cracked. I found one on ebay. I paid a ridiculous $30. Evaporust, Bar Keepers friend, Flitz, clay bar, rubbing compound, liquid carnuba wax, new decals, Schwinn cables/housings, Hunt-Wilde bar tape, etc. I stopped keeping track after $100. Restoration? Close to being on the road again. The most over restored Schwinn on BF for the year award?
Wow, that turned out freakin' nice!
__________________
There were 135 Confentes, but only one...Huffente!
There were 135 Confentes, but only one...Huffente!
Likes For AdventureManCO:
#49
Newbie
Join Date: Mar 2020
Location: New Hampshire
Posts: 59
Bikes: Raleighs (International, Super Tourer, Gran Sport, Super Course), Miyatas (610, Alumicross), Bianchi Eros, Fuji Cross Pro, Lotus Excelle, Paramount Series 7 Carbon, Univega Super Strada, Wheeler Tremosine,
Liked 62 Times
in
25 Posts
I wish they had something like that where I live. The closest thing would be the people who set things out by the road a few days before trash day. The township has a large item collection a couple times a year, but everything goes straight in a dumpster. They have one for metal and another one for everything else. A couple weeks ago I was going past the township building while they were having a collection and I spotted a girl's bike hanging off the back of a truck as they turned in. A couple hours later, I was buying one at a flea market to fix up for my niece. It was a '92 Schwinn CrissCross for $20. I was scrambling to get it finished in time for my next trip over there and forgot to get a picture.
Our small town does not provide for trash pickup. We bring ours to the town dump (transfer station).
We were once featured in a New York Times article!! https://www.nytimes.com/2007/11/13/us/13dump.html
Back then, the re-use table was up top on the same level as the other disposal and recycling. After the table caught fire, they moved it to the area down below.
Likes For USAZorro: