Helix Update?
#126
Senior Member
#127
Senior Member
Ah, OK, I am ignorant about what exists over there... Perhaps the hubs that are already here would be dealt in that way. The front wheels are built in Asia due to custom lefty hubs built by Formula. Not sure about the rears. Formula also supply the 10-sp rear hubs so it makes sense that these also will be built at the same time. Maybe just the Alfine wheels will be built in Canads.
#128
Banned
Join Date: Dec 2013
Location: Olney Illinois USA
Posts: 1,021
Bikes: to many
Likes: 0
Liked 1 Time
in
1 Post
yeah but its real cheap to sent hubs over here.... rims and spokes are plentiful here in the US
shipping complete wheels is expensive from Taiwan... but he does have enough money I assume ..
Its relatively easy ... purchase the hubs from Formula, have them send to Sta True ( as an example ) or somebody like them in Canada ( like Cycle Lambert, or procycle ) tell them what spokes and what rims and they built the wheels ...
:-)
shipping complete wheels is expensive from Taiwan... but he does have enough money I assume ..
Its relatively easy ... purchase the hubs from Formula, have them send to Sta True ( as an example ) or somebody like them in Canada ( like Cycle Lambert, or procycle ) tell them what spokes and what rims and they built the wheels ...
:-)
#129
Senior Member
I wonder what the Burn rate for the company is...
It does not take long to run through a lot of money running a company when it is not producing anything.
Big Money upfront for starting a business can often cause a higher burn rate.
Major changes in direction from Welded to Glued back to Welded scare me also.
It would not be all that expensive to ship wheels from Asia. You could easily get 1000 to 1500 wheels in a 40 foot container---my guess---and that is about $4k to $10k for shipping. I don't know about Duty however.
You can get right at 300 Mountain bicycles in a 40 foot container---that is my baseline for size.
It does not take long to run through a lot of money running a company when it is not producing anything.
Big Money upfront for starting a business can often cause a higher burn rate.
Major changes in direction from Welded to Glued back to Welded scare me also.
It would not be all that expensive to ship wheels from Asia. You could easily get 1000 to 1500 wheels in a 40 foot container---my guess---and that is about $4k to $10k for shipping. I don't know about Duty however.
You can get right at 300 Mountain bicycles in a 40 foot container---that is my baseline for size.
#130
Senior Member
Join Date: Sep 2005
Location: Greensboro, NC
Posts: 1,498
Bikes: Many Downtube Folders :)
Likes: 0
Liked 24 Times
in
17 Posts
My last 40' container costed $3500 including truck delivery ( in NC ).
Thanks,
Yan
Thanks,
Yan
__________________
Designer of Downtube Folding Bike
Ph.D. Temple University ( Math )
Biked across the USA twice
Semi-active chess player ( two time Bahamas National Champion )
Sivananda ( Bahamas ) Trained Yoga instructor ( 2013 ) and ThetaHealer since 2013
Bicycle delivery worker for Jimmy John's. Delivering is the best workout I have ever had.
Designer of Downtube Folding Bike
Ph.D. Temple University ( Math )
Biked across the USA twice
Semi-active chess player ( two time Bahamas National Champion )
Sivananda ( Bahamas ) Trained Yoga instructor ( 2013 ) and ThetaHealer since 2013
Bicycle delivery worker for Jimmy John's. Delivering is the best workout I have ever had.
#132
Senior Member
I have gotten a few containers through the port of Seattle. It seems like there are so many added fees. I don't remember exactly what the total was but I am also 400 miles from the port and shipping to here was included. $3500 seems pretty good.
#134
Senior Member
Join Date: Dec 2005
Location: Richmond, VA
Posts: 424
Bikes: Torelli Titanio; Serotta Atlanta Concept; Specialized Rockhopper, Raleigh Twenty, Velo Orange Polyvalent
Likes: 0
Liked 6 Times
in
4 Posts
I'm not a backer, but if I was, I think I'd be angry because it seems like he delayed delivery for a very long time while using the backers' money to fund development of intellectual property and pay lawyers for patent applications. Was any of that in the Kickstarter presentation?
Seems like he could have built and delivered the bikes sooner simply by foregoing his IP goals and not turning his backers into unwitting and unrewarded venture capitalists.
Seems like he could have built and delivered the bikes sooner simply by foregoing his IP goals and not turning his backers into unwitting and unrewarded venture capitalists.
#136
Senior Member
I'm not a backer, but if I was, I think I'd be angry because it seems like he delayed delivery for a very long time while using the backers' money to fund development of intellectual property and pay lawyers for patent applications. Was any of that in the Kickstarter presentation?
Seems like he could have built and delivered the bikes sooner simply by foregoing his IP goals and not turning his backers into unwitting and unrewarded venture capitalists.
Seems like he could have built and delivered the bikes sooner simply by foregoing his IP goals and not turning his backers into unwitting and unrewarded venture capitalists.
#138
...and I did not eventually end up with a functional and amazing Ti bike, I would shrug it off as a bad investment and move on with my life. Kickstarter is not ebay, amazon, alibaba, or online shopping, it's taking a risk with some promised investment payout.
If I wanted a Ti folder, I'd get one currently in production. If I wanted THAT design, I would certainly be disappointed, but at this stage, I'd be hopeful that the intellectual property would be sold and that someone would make it a reality.
If I was just some piker looking for a deal on Ti folding bike, meh, I might get angry, or I might shrug and think to myself, "If it sounds too good to be true, it probably is..."
If I wanted a Ti folder, I'd get one currently in production. If I wanted THAT design, I would certainly be disappointed, but at this stage, I'd be hopeful that the intellectual property would be sold and that someone would make it a reality.
If I was just some piker looking for a deal on Ti folding bike, meh, I might get angry, or I might shrug and think to myself, "If it sounds too good to be true, it probably is..."
#140
Full Member
Join Date: Dec 2012
Location: West Palm Beach, Florida
Posts: 263
Bikes: 1984 Cannodale full touring bike, Giant full carbon dura ace, Belinsky frame Tandem
Likes: 0
Liked 1 Time
in
1 Post
I believe he is going to pull it off. As a backer I would rather wait to have a better riding and more durable folder than the prototype. If he doesn't then, it will be lesson learned. $1300 would hurt, but it doesn't going to make you poor. It would be foolish not to bring it to market. If it rides as good as it looks, then he has a money making folder.
Double O
Double O
#141
Senior Member
I believe he is going to pull it off. As a backer I would rather wait to have a better riding and more durable folder than the prototype. If he doesn't then, it will be lesson learned. $1300 would hurt, but it doesn't going to make you poor. It would be foolish not to bring it to market. If it rides as good as it looks, then he has a money making folder.
Double O
Double O
(I am backer 219 )
#143
Senior Member
The pedals are removed in the folded pic.
#145
Newbie
Join Date: Oct 2016
Posts: 1
Likes: 0
Liked 0 Times
in
0 Posts
I'm also a kickstarter backer for the bike. I don't have a problem with the delays, per se, but I do have a problem with the company's wildly unsubstantiated issuing of updated delivery dates. The "delays" exist because the company fails to meet it's own absurd completion schedule. This undermines confidence. It would have been entirely reasonable to have stated design and production will take 36 months, or whatever. Of course, if the reason for being overly optimistic about the release date was to dupe investors, I'd be thinking about, one way or the other, getting my money back.
#147
Senior Member
#148
Newbie
Join Date: Dec 2008
Posts: 2
Likes: 0
Liked 0 Times
in
0 Posts
Sorry for being a bit of a "lurker" here, but I haven't had much to add or ask until now. Although I didn't jump in during the Kickstarter campaign, I am very interested to pre-order a helix when that option comes.
Jur, would you please post the rest of the new photos you had access to as one of the Kickstarter backers? I would love to see more images of how the front end design was resolved.
Regarding Joe Remi's comment, "That dude is a crook", that's a very strong accusation. I have not seen any evidence here or elsewhere that would make that a true statement. Yes, there have been numerous delays and it seems he should have made managed expectations better with more realistic delivery date projections, (it sounds like he's had his share of challenges along the way) but the time spent developing/resolving/patenting the design seems to have been in the interest of putting out a better/stronger/safer bike. How many of us have ever tried to start a bike company from scratch, let alone one that has a truly unique folding frame/fork design?
Jur, would you please post the rest of the new photos you had access to as one of the Kickstarter backers? I would love to see more images of how the front end design was resolved.
Regarding Joe Remi's comment, "That dude is a crook", that's a very strong accusation. I have not seen any evidence here or elsewhere that would make that a true statement. Yes, there have been numerous delays and it seems he should have made managed expectations better with more realistic delivery date projections, (it sounds like he's had his share of challenges along the way) but the time spent developing/resolving/patenting the design seems to have been in the interest of putting out a better/stronger/safer bike. How many of us have ever tried to start a bike company from scratch, let alone one that has a truly unique folding frame/fork design?
#149
Senior Member
Sorry for being a bit of a "lurker" here, but I haven't had much to add or ask until now. Although I didn't jump in during the Kickstarter campaign, I am very interested to pre-order a helix when that option comes.
Jur, would you please post the rest of the new photos you had access to as one of the Kickstarter backers? I would love to see more images of how the front end design was resolved.
Regarding Joe Remi's comment, "That dude is a crook", that's a very strong accusation. I have not seen any evidence here or elsewhere that would make that a true statement. Yes, there have been numerous delays and it seems he should have made managed expectations better with more realistic delivery date projections, (it sounds like he's had his share of challenges along the way) but the time spent developing/resolving/patenting the design seems to have been in the interest of putting out a better/stronger/safer bike. How many of us have ever tried to start a bike company from scratch, let alone one that has a truly unique folding frame/fork design?
Jur, would you please post the rest of the new photos you had access to as one of the Kickstarter backers? I would love to see more images of how the front end design was resolved.
Regarding Joe Remi's comment, "That dude is a crook", that's a very strong accusation. I have not seen any evidence here or elsewhere that would make that a true statement. Yes, there have been numerous delays and it seems he should have made managed expectations better with more realistic delivery date projections, (it sounds like he's had his share of challenges along the way) but the time spent developing/resolving/patenting the design seems to have been in the interest of putting out a better/stronger/safer bike. How many of us have ever tried to start a bike company from scratch, let alone one that has a truly unique folding frame/fork design?
#150
Senior Member
Sorry for being a bit of a "lurker" here, but I haven't had much to add or ask until now. Although I didn't jump in during the Kickstarter campaign, I am very interested to pre-order a helix when that option comes.
Jur, would you please post the rest of the new photos you had access to as one of the Kickstarter backers? I would love to see more images of how the front end design was resolved.
Regarding Joe Remi's comment, "That dude is a crook", that's a very strong accusation. I have not seen any evidence here or elsewhere that would make that a true statement. Yes, there have been numerous delays and it seems he should have made managed expectations better with more realistic delivery date projections, (it sounds like he's had his share of challenges along the way) but the time spent developing/resolving/patenting the design seems to have been in the interest of putting out a better/stronger/safer bike. How many of us have ever tried to start a bike company from scratch, let alone one that has a truly unique folding frame/fork design?
Jur, would you please post the rest of the new photos you had access to as one of the Kickstarter backers? I would love to see more images of how the front end design was resolved.
Regarding Joe Remi's comment, "That dude is a crook", that's a very strong accusation. I have not seen any evidence here or elsewhere that would make that a true statement. Yes, there have been numerous delays and it seems he should have made managed expectations better with more realistic delivery date projections, (it sounds like he's had his share of challenges along the way) but the time spent developing/resolving/patenting the design seems to have been in the interest of putting out a better/stronger/safer bike. How many of us have ever tried to start a bike company from scratch, let alone one that has a truly unique folding frame/fork design?