Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Seat Post Collar Size.

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Seat Post Collar Size.

Old 01-16-17, 10:24 AM
  #1  
Heyspike
Member
Thread Starter
 
Heyspike's Avatar
 
Join Date: Jul 2012
Location: Hudson Valley NY
Posts: 43

Bikes: 2017 Cannondale Carbon Synapse,2016 Cannondale Beast of the East, 2014 Cannondale CAADX, 1990's Specialized Hard Rock

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 16 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Seat Post Collar Size.

Need Seat Post Collar Size. The seat post says it's 31.6 mm, So a 32.0 collar should work? Cannondale Beast of the East 3.
Thanks.
Heyspike is offline  
Old 01-16-17, 12:34 PM
  #2  
HillRider
Senior Member
 
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 32,809

Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!

Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1651 Post(s)
Likes: 0
Liked 505 Times in 382 Posts
Originally Posted by Heyspike View Post
Need Seat Post Collar Size. The seat post says it's 31.6 mm, So a 32.0 collar should work? Cannondale Beast of the East 3.
Seat post collars are sized to match the outside diameter of the seat tube, not the seat post.
HillRider is offline  
Old 01-16-17, 02:07 PM
  #3  
fietsbob
Banned
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 43,599

Bikes: 8

Mentioned: 197 Post(s)
Tagged: 0 Thread(s)
Quoted: 7607 Post(s)
Liked 1,317 Times in 827 Posts
You are going to have to buy measuring tools.

ID + 2 x the tube wall thickness is the OD of the tube..


generally tubing uses inch sizes, but are spoken of in metric ..numbers..






Last edited by fietsbob; 01-16-17 at 09:16 PM.
fietsbob is offline  
Old 01-16-17, 07:16 PM
  #4  
dsbrantjr
Senior Member
 
dsbrantjr's Avatar
 
Join Date: Sep 2010
Location: Roswell, GA
Posts: 8,055

Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta

Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1333 Post(s)
Liked 821 Times in 574 Posts
A 32.0mm will not work since the seat tube is certainly thicker than 0.2mm (~0.008"). You will need to measure.
dsbrantjr is offline  
Old 01-16-17, 08:02 PM
  #5  
JanMM
rebmeM roineS
 
JanMM's Avatar
 
Join Date: Jan 2006
Location: Metro Indy, IN
Posts: 16,033

Bikes: Bacchetta Giro A20, RANS V-Rex, RANS Screamer

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 608 Post(s)
Liked 259 Times in 168 Posts
Harbor Freight sells a perfectly OK digital caliper for not much.
__________________
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
JanMM is offline  
Old 01-16-17, 09:21 PM
  #6  
Davet
Licensed Bike Geek
 
Davet's Avatar
 
Join Date: Oct 2002
Location: Los Barriles, Baja Sur, Mexico
Posts: 1,320

Bikes: Look 585, Kirk Terraplane, Serotta Ottrott, Spectrum Super Custom, Hampsten Carbon Leger Tournesol

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 80 Post(s)
Liked 38 Times in 27 Posts
You'll need a 34.8 (35mm) seat post clamp.
Davet is offline  
Old 01-16-17, 10:34 PM
  #7  
Leisesturm
Senior Member
 
Join Date: Jul 2005
Posts: 4,693
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 1723 Post(s)
Liked 267 Times in 199 Posts
Originally Posted by JanMM View Post
Harbor Freight sells a perfectly OK digital caliper for not much.
So does Radio Shack...
Leisesturm is offline  
Old 01-23-17, 04:49 AM
  #8  
Heyspike
Member
Thread Starter
 
Heyspike's Avatar
 
Join Date: Jul 2012
Location: Hudson Valley NY
Posts: 43

Bikes: 2017 Cannondale Carbon Synapse,2016 Cannondale Beast of the East, 2014 Cannondale CAADX, 1990's Specialized Hard Rock

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 16 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Thanks guys, didn't think about adding the frame too.
Heyspike is offline  
Old 01-23-17, 08:43 AM
  #9  
pdlamb
Senior Member
 
Join Date: Dec 2010
Location: northern Deep South
Posts: 6,764

Bikes: Fuji Touring, Novara Randonee

Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 1549 Post(s)
Liked 742 Times in 463 Posts
IMHO this is one of those questions with "go to your LBS" as the correct answer. Buying a caliper good enough to measure to the nearest tenth of a millimeter is going to cost more than the markup a decent LBS will put on the collar.
pdlamb is online now  
Old 01-23-17, 01:20 PM
  #10  
HillRider
Senior Member
 
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 32,809

Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!

Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1651 Post(s)
Likes: 0
Liked 505 Times in 382 Posts
Originally Posted by pdlamb View Post
IMHO this is one of those questions with "go to your LBS" as the correct answer. Buying a caliper good enough to measure to the nearest tenth of a millimeter is going to cost more than the markup a decent LBS will put on the collar.
Except afterwards you will own the caliper and have it available whenever you need to accurately measure something else. Going to a bike shop only gets you the need to do it again the next time you need similar help.
HillRider is offline  
Old 01-23-17, 04:13 PM
  #11  
pdlamb
Senior Member
 
Join Date: Dec 2010
Location: northern Deep South
Posts: 6,764

Bikes: Fuji Touring, Novara Randonee

Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 1549 Post(s)
Liked 742 Times in 463 Posts
Originally Posted by HillRider View Post
Except afterwards you will own the caliper and have it available whenever you need to accurately measure something else. Going to a bike shop only gets you the need to do it again the next time you need similar help.


I know, he who dies with the most toys and all. But let's get real about cost and savings. I've only replaced one seat post collar, and it cost less than $25 at the LBS. Where can you get a decent caliper for anywhere near that? A really good mechanical one (if you can still find such a thing) is upwards of $75. The electronic cheap caliper from Harbor freight was $30, IIRC, and it took another $10 of batteries to get it working again within two years. Cheap plastic mechanical junk cost me more in ordering the wrong size part than either of the other two. So where's the savings again?
pdlamb is online now  
Old 01-23-17, 04:59 PM
  #12  
HillRider
Senior Member
 
Join Date: Aug 2005
Location: Pittsburgh, PA
Posts: 32,809

Bikes: '96 Litespeed Catalyst, '05 Litespeed Firenze, '06 Litespeed Tuscany, '20 Surly Midnight Special, All are 3x10. It is hilly around here!

Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1651 Post(s)
Likes: 0
Liked 505 Times in 382 Posts
Originally Posted by pdlamb View Post
I know, he who dies with the most toys and all. But let's get real about cost and savings. I've only replaced one seat post collar, and it cost less than $25 at the LBS. Where can you get a decent caliper for anywhere near that? A really good mechanical one (if you can still find such a thing) is upwards of $75. The electronic cheap caliper from Harbor freight was $30, IIRC, and it took another $10 of batteries to get it working again within two years. Cheap plastic mechanical junk cost me more in ordering the wrong size part than either of the other two. So where's the savings again?
It's not a matter of "toys", it's having a useful tool when you need it. You can get a really decent dial-type stainless steel caliper for $35 or less from several sources and they are both accurate and durable and need no batteries. Since most are in inch calibration you do need to know how to multiply by 25.4.

Yes, "name brands" such as Starrett and Mitutoyo cost much more but are not needed unless you work in a machine shop.
HillRider is offline  
Old 01-23-17, 08:48 PM
  #13  
JanMM
rebmeM roineS
 
JanMM's Avatar
 
Join Date: Jan 2006
Location: Metro Indy, IN
Posts: 16,033

Bikes: Bacchetta Giro A20, RANS V-Rex, RANS Screamer

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 608 Post(s)
Liked 259 Times in 168 Posts
Current online price for HF digital caliper is $19.99. Looks like the one I have. Functional.
__________________
Bacchetta Giro A20, RANS V-Rex, RANS Screamer
JanMM is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cqlink
Classic and Vintage Bicycles: Whats it Worth? Appraisals.
3
01-16-19 01:21 PM
Hudson308
Classic & Vintage
8
03-23-17 02:54 PM
greg3rd48
Bicycle Mechanics
6
06-26-15 05:59 PM
lambo2124
Bicycle Mechanics
5
04-19-13 07:05 PM
Just Riding
Bicycle Mechanics
2
04-23-12 07:46 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.