Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

What have you been wrenching on lately?

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

What have you been wrenching on lately?

Old 06-25-20, 04:49 AM
  #3251  
J.Higgins 
2-Wheeled Fool
 
J.Higgins's Avatar
 
Join Date: Sep 2016
Location: New Hampshire
Posts: 2,486

Bikes: Surly Ogre, Brompton

Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 1385 Post(s)
Liked 677 Times in 457 Posts
Originally Posted by capnjonny
I just finished this Nishiki Olympic Mixte and am taking it to the shop tomorrow for them to sell. When I brought it home I was unimpressed with the color. It looked like dirty brown mustard. After I stripped the steel wheels and the drop bars and stem shifters it started to grow on me. By the time I had completely stripped it and gave everything a good clean I was in love. You can tell a bike has not been ridden when the crank spindle has absolutely no wear on it. The 40-52 tooth Maxi chain rings looked new, and the paint had almost no damage. Just a few pin holes.

I was starting to get a Serengeti vibe, the paint reminded me of a lion or leopard, and I almost painted spots on the frame. I did put a cool Bianchi saddle with leopard spots on it which I had been dying to use on a build. This was the time.

Even though it came with a nice Shimano 600 derailleur I decided to kit it out with Suntour bits, including a Vgt long cage rear and Spirt front Der, and Suntour adjustable ratchet thumb shifters. The original Diacompe center pulls were like new but I swapped in some Coolstop pads. For wheels I used a 1 1/4 x 27 at the back and a 1 x 27 in front , both with sealed bearings and stainless spokes.

New 1 1/8 x 27 gum walls from our huge stash of them and a new adjustable stem and new 2" riser bars with some custom brown grips completed the package

Oh, I almost forgot. I put a 6 speed Suntour 13-30 tooth freewheel on it . lots of range for hills or flats.

Enjoy




Gorgeous bike! These are the mixtes that I'm always in search of: True mixte frame, good tubing, and forged dropouts.
J.Higgins is offline  
Old 06-25-20, 07:28 AM
  #3252  
Mr. 66
Senior Member
 
Mr. 66's Avatar
 
Join Date: Aug 2015
Posts: 3,440
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 1124 Post(s)
Liked 1,704 Times in 941 Posts
The Berk, Fuji Berkeley that had a stuck gooseneck, steel tapered cranks, bad wheels.

With the stem frozen in place I went to a friends with a more proper vice for handling this situation. Clamped the crown applied penetrates and torked the steel Nitto handle bars til they broke free.

New cup for the lower headset.
I removed 17.6 pounds of bike shaped parts.

I'll have it all together later today
Mr. 66 is offline  
Old 06-25-20, 03:24 PM
  #3253  
52telecaster
ambulatory senior
 
52telecaster's Avatar
 
Join Date: Dec 2016
Location: Peoria Il
Posts: 6,347

Bikes: Austro Daimler modified by Gugie! Raleigh Professional and lots of other bikes.

Mentioned: 76 Post(s)
Tagged: 0 Thread(s)
Quoted: 1953 Post(s)
Liked 3,633 Times in 1,670 Posts
Built a set of wheels today..
52telecaster is offline  
Likes For 52telecaster:
Old 06-26-20, 02:31 PM
  #3254  
daverup 
Senior Member
 
daverup's Avatar
 
Join Date: Jun 2019
Location: Michigan USA
Posts: 902

Bikes: A bunch of old bikes.

Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Quoted: 265 Post(s)
Liked 821 Times in 396 Posts
Finally finished the 1999 Terry Symmetry for my wife. It needed attention, but no serious problems.
All wheel bearings cleaned and repacked, new bottom bracket Tange LN-3922. New cables, brake pads, tires and tubes.
Stripped RSX brifters, cleaned and relubed. New SRAM chain.
My wife took it for a little ride and was happy despite the need for minor tweeks.


daverup is offline  
Old 06-26-20, 03:07 PM
  #3255  
eom 
Eccentric Old Man
 
eom's Avatar
 
Join Date: Jan 2014
Location: BelleVegas, IL
Posts: 810

Bikes: 1986 Trek 520 Cirrus, 1979 Schwinn Traveler III, Trek T100, 1995 Trek 970, Fuji America

Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 248 Post(s)
Likes: 0
Liked 173 Times in 87 Posts
Fixer upper to sell. They are well made.

__________________
email:
bikeforums@protonmail.com


eom is offline  
Old 06-27-20, 08:19 AM
  #3256  
Mr. 66
Senior Member
 
Mr. 66's Avatar
 
Join Date: Aug 2015
Posts: 3,440
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 1124 Post(s)
Liked 1,704 Times in 941 Posts
The Univega Gran Premio was parted out and frame sold. The parts were used on a Trek and sold. Well the opportunity presented itself and the Gran Premio is back. No now is being built with some of the stash.




Mr. 66 is offline  
Old 06-27-20, 09:52 AM
  #3257  
Mr. 66
Senior Member
 
Mr. 66's Avatar
 
Join Date: Aug 2015
Posts: 3,440
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 1124 Post(s)
Liked 1,704 Times in 941 Posts
Here is the Fuji Berkeley in it's final form, I like it.
Mr. 66 is offline  
Old 06-27-20, 12:32 PM
  #3258  
bikemig 
Senior Member
 
bikemig's Avatar
 
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 20,505

Bikes: A bunch of old bikes and a few new ones

Mentioned: 178 Post(s)
Tagged: 0 Thread(s)
Quoted: 5877 Post(s)
Liked 3,445 Times in 2,066 Posts
'89 Specialized Rockhopper

At least I think it's an '89; certainly it's late 80s with a U-brake. I rebuilt the Specialized Rockhopper for my nephew who wants a bike to ride around town and go to school with. The bike is about a decade older than he is.

It has good quality 26 x 1.5 tires (with tire liners), new cables, new chain, new grips, and new shifters. I had to go with a 7 speed rear wheel that I robbed from an early 90s rockhopper as the old wheel was shot so I went ahead and replaced ths shifter as well. The sun friction shifters work well and they're a good deal at around $10 with cable and housing. I used old parts as much as I could. I also overhauled the bike.

I'll ride the bike for a few days to check it out before boxing and shipping it. I'll also get rid of the quick release seatpost binder bolt and replace it with less stealable one before I ship it.



bikemig is offline  
Likes For bikemig:
Old 06-27-20, 04:40 PM
  #3259  
Night Treker
Senior Member
 
Join Date: May 2020
Location: Detroit area Michigan
Posts: 75

Bikes: Trek 1200 Specialized HardRock Hybrid GT Tempest MTB

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Liked 14 Times in 13 Posts
Old bar tape uses

Had some stuff left over and did this...



Haven't ridden it yet but feels better than big chunks of rubber
Night Treker is offline  
Old 06-28-20, 02:09 PM
  #3260  
deux jambes
Senior Member
 
deux jambes's Avatar
 
Join Date: Jul 2018
Location: Eugene, OR
Posts: 1,340
Mentioned: 64 Post(s)
Tagged: 0 Thread(s)
Quoted: 535 Post(s)
Liked 344 Times in 196 Posts
Finally got all the paint stripped off of the Benotto. Just nooks n crannies left, to be followed up with a little cleaning/polishing, a WD-40 wipe down, and a a shot of Frame Saver inside.


deux jambes is offline  
Likes For deux jambes:
Old 06-28-20, 06:15 PM
  #3261  
seedsbelize 
smelling the roses
 
seedsbelize's Avatar
 
Join Date: Nov 2010
Location: Tixkokob, Yucatán, México
Posts: 15,428

Bikes: 79 Trek 930, 80 Trek 414, 84 Schwinn Letour Luxe (coupled), 92 Schwinn Paramount PDG 5

Mentioned: 104 Post(s)
Tagged: 1 Thread(s)
Quoted: 7081 Post(s)
Liked 901 Times in 612 Posts
Wheels. Building and overhauling
__________________
Originally Posted by Bah Humbug
Auto-pause is a honey-tongued devil whispering sweet lies in your ear.


seedsbelize is offline  
Old 06-28-20, 07:54 PM
  #3262  
Steel Charlie
Senior Member
 
Steel Charlie's Avatar
 
Join Date: Apr 2009
Posts: 902
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 354 Post(s)
Liked 489 Times in 261 Posts
Picked up a early 80's 58cm Guerciotti for the SR group on it. Frame's too big for me (Dang!) so I'll have to get around to flipping it sometime.
Steel Charlie is offline  
Old 06-29-20, 07:55 AM
  #3263  
seedsbelize 
smelling the roses
 
seedsbelize's Avatar
 
Join Date: Nov 2010
Location: Tixkokob, Yucatán, México
Posts: 15,428

Bikes: 79 Trek 930, 80 Trek 414, 84 Schwinn Letour Luxe (coupled), 92 Schwinn Paramount PDG 5

Mentioned: 104 Post(s)
Tagged: 1 Thread(s)
Quoted: 7081 Post(s)
Liked 901 Times in 612 Posts
Originally Posted by Mr. 66
The Berk, Fuji Berkeley that had a stuck gooseneck, steel tapered cranks, bad wheels.

With the stem frozen in place I went to a friends with a more proper vice for handling this situation. Clamped the crown applied penetrates and torked the steel Nitto handle bars til they broke free.

New cup for the lower headset.
I removed 17.6 pounds of bike shaped parts.

I'll have it all together later today
Nice vise
__________________
Originally Posted by Bah Humbug
Auto-pause is a honey-tongued devil whispering sweet lies in your ear.


seedsbelize is offline  
Old 06-29-20, 09:36 AM
  #3264  
Mr. 66
Senior Member
 
Mr. 66's Avatar
 
Join Date: Aug 2015
Posts: 3,440
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 1124 Post(s)
Liked 1,704 Times in 941 Posts
Here is the final piece, 25 pounds 10 ounces with reflectors.

Mr. 66 is offline  
Old 06-29-20, 10:35 AM
  #3265  
ydrea
Junior Member
 
Join Date: Aug 2014
Posts: 13
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time in 1 Post
a Sunn softtail mtb
ydrea is offline  
Old 06-29-20, 11:09 AM
  #3266  
thumpism 
Bikes are okay, I guess.
 
thumpism's Avatar
 
Join Date: Jan 2015
Location: Richmond, Virginia
Posts: 9,128

Bikes: Waterford Paramount Touring, Giant CFM-2, Raleigh Sports 3-speeds in M23 & L23, Schwinn Cimarron oddball build, Marin Palisades Trail dropbar conversion, Nishiki Cresta GT

Mentioned: 69 Post(s)
Tagged: 0 Thread(s)
Quoted: 2647 Post(s)
Liked 2,445 Times in 1,557 Posts
Put GripShift MRX shifters and dumpster-found alloy brake levers (with the nifty bump out for those shifters) on a buddy's bike, a mid-'90s Diamond Back Apex. A year or so ago I'd put a riser stem and bars on it for a more comfortable riding position and now his tendonitis is making shifting more difficult. He likes the twist shifting and now wants an even taller stem/bar combo. He gave me the old original RapidFire STI levers that I'll never use.
thumpism is offline  
Old 06-29-20, 11:52 AM
  #3267  
Andy_K 
Senior Member
 
Andy_K's Avatar
 
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,787

Bikes: Yes

Mentioned: 522 Post(s)
Tagged: 0 Thread(s)
Quoted: 3228 Post(s)
Liked 3,853 Times in 1,436 Posts
Originally Posted by SJX426
I have been having fun learning about 2nd gen Ergo's. I purchased two sets one day apart.

The first set were Chorus and it was a desperate move to get the De Rosa project completed. It has had a couple of issues including bottom bracket selection, brake mounting issues, FD not correct, etc. The last item to buy were a set of Ergos. The Chorus set looked OK on the pictures from the seller but after receiving them, I was disappointed in the amount of damage covered by the hoods. Although the right lever worked, it only worked through the first 6-7 positions using the back lever. Beyond that the lever worked but the thumb lever would return the selection all the way back to position one. Tear down time. Found the G spring retainer was broken in two places. I decided it was appropriate to examine the left as well. The body was dramatically damaged from being ground down. Parts were arded and arrived yesterday. Oh and the seller refunded about 35%.

The second set was offered by a very generous BF'r who sold me a set of Record with the right side in parts. Included were new hoods and G springs. Cleaned both sides up, lubed, assembled and they work very well without being cables.

Needless to say, i am well experienced with how to disassemble and assemble 2nd gen Ergo's. The only difference between Chorus and Record appear to be the nomenclature on the levers. Both sets have ball bearing for the pivot shafts. A replacement of the left body came with "QS Micron" on the front. it is identical to the "BB System" body. I think the 2nd get bodies are all the same but the internals may have changed.

Put this pic in "What came in the post..."
P1030435, on Flickr

Bagged all the parts for the Chorus since the Records are going on the bike. I need to decide what to do with the Chorus set. Spare parts for now.
Used Ergo levers are always a bit of a gamble. You never know where they're going to be in the wear cycle. I did a rebuild once and found that I just don't have enough patience to enjoy it. For second and third generation, you can get complete replacement shift assemblies for around $100, which is worth it to avoid a rebuild in my book. Of course, that depends on the bodies and blades being in decent shape.

What is it about Campy levers that such a high percentage of them have crash damage? I know they're more likely to have been used for actual racing than most components, but it seems like it's rare to find a set of Campy Ergos that don't have at least some road rash on the brake body.
__________________
My Bikes
Andy_K is offline  
Old 06-29-20, 12:07 PM
  #3268  
Andy_K 
Senior Member
 
Andy_K's Avatar
 
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,787

Bikes: Yes

Mentioned: 522 Post(s)
Tagged: 0 Thread(s)
Quoted: 3228 Post(s)
Liked 3,853 Times in 1,436 Posts
I've been working on rebuilding my 1969 Raleigh International after sending it to L'Atelier for some minor Gugificazione (water bottle bosses and front rack mounts). The coil spring on the rear derailleur broke about a year ago, and it took me a long time to get around to replacing it. The chrome is rough and the paint, while, original isn't as good as it looks in a picture, so I decided to get the basic braze-ons and gamble that I could match the paint.

Before paint:


After (Gloss Black Rustoleum):


I may never buy another non-black bike again.

I ended up replacing the 3-Pulley LePree rear derailleur with a 3-Pulley XC. I think this is about 38T of wrap.

__________________
My Bikes
Andy_K is offline  
Old 06-29-20, 01:37 PM
  #3269  
SJX426 
Senior Member
 
SJX426's Avatar
 
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,580

Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8

Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1601 Post(s)
Liked 2,187 Times in 1,092 Posts
Originally Posted by Andy_K
Used Ergo levers are always a bit of a gamble. You never know where they're going to be in the wear cycle. I did a rebuild once and found that I just don't have enough patience to enjoy it. For second and third generation, you can get complete replacement shift assemblies for around $100, which is worth it to avoid a rebuild in my book. Of course, that depends on the bodies and blades being in decent shape.

What is it about Campy levers that such a high percentage of them have crash damage? I know they're more likely to have been used for actual racing than most components, but it seems like it's rare to find a set of Campy Ergos that don't have at least some road rash on the brake body.
Absolutely a gamble. I was trying to keep the cost down enough that I might rover most of the investment in $.
I think that the only Campy parts that are offered are those that have road rash! Most people would keep the parts otherwise. The explanation from the seller of the Chorus was the preplacement of the 10 speed with 11 speed. Claimed they worked fine when he retired them a few years ago. I think the move to 11 was inspired by the damage in his crash!
RDs suffer the same issue. Unless you buy NOS or near NOS they all have road rash on the upper pivot of the parallelogram links. That is the first place I look. FD suffer from a lot of wear on the inner plate, as might be expected. Gotta watch out for missing or substitute HW too!
__________________
Bikes don't stand alone. They are two tired.
SJX426 is offline  
Old 06-30-20, 05:34 PM
  #3270  
gaucho777 
Senior Member
 
gaucho777's Avatar
 
Join Date: Aug 2009
Location: Berkeley, CA
Posts: 7,445

Bikes: '72 Cilo Pacer, '72 Gitane Gran Tourisme, '72 Peugeot PX10, '73 Speedwell Ti, '74 Peugeot UE-8, '75 Peugeot PR-10L, '80 Colnago Super, '85 De Rosa Pro, '86 Look Equipe 753, '86 Look KG86, '89 Parkpre Team, '90 Parkpre Team MTB, '90 Merlin

Mentioned: 87 Post(s)
Tagged: 0 Thread(s)
Quoted: 826 Post(s)
Liked 2,048 Times in 545 Posts
I painted a still-unidentified sport (mixte variant) frame for my daughter a few weeks ago. I'm slowing cleaning & polishing the parts for it while the paint cures. Hoping to have it completed in the next week or two.

Untitled by gaucho777, on Flickr










Last edited by gaucho777; 06-30-20 at 05:38 PM.
gaucho777 is offline  
Likes For gaucho777:
Old 06-30-20, 05:43 PM
  #3271  
SJX426 
Senior Member
 
SJX426's Avatar
 
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,580

Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8

Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1601 Post(s)
Liked 2,187 Times in 1,092 Posts
gaucho777 Nice color! Did you order that color as a custom paint? Tell us more about the paint.

I worked on cabling on the De Rosa Today. All done. Just need to put hoods on and test ride for minor adjustments.
P1030491, on Flickr
__________________
Bikes don't stand alone. They are two tired.
SJX426 is offline  
Old 06-30-20, 05:50 PM
  #3272  
gaucho777 
Senior Member
 
gaucho777's Avatar
 
Join Date: Aug 2009
Location: Berkeley, CA
Posts: 7,445

Bikes: '72 Cilo Pacer, '72 Gitane Gran Tourisme, '72 Peugeot PX10, '73 Speedwell Ti, '74 Peugeot UE-8, '75 Peugeot PR-10L, '80 Colnago Super, '85 De Rosa Pro, '86 Look Equipe 753, '86 Look KG86, '89 Parkpre Team, '90 Parkpre Team MTB, '90 Merlin

Mentioned: 87 Post(s)
Tagged: 0 Thread(s)
Quoted: 826 Post(s)
Liked 2,048 Times in 545 Posts
SJX426 Thanks. It's an automotive paint. San Leandro Color, where I bought the paint, specializes in paint for car restorations and refinishes. I went with my daughter and she picked out the color from their large selection of binders with sample paint colors.

Your De Rosa looks great!
gaucho777 is offline  
Likes For gaucho777:
Old 07-03-20, 10:49 AM
  #3273  
Bianchigirll 
Bianchi Goddess
 
Bianchigirll's Avatar
 
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 29,716

Bikes: Too many to list here check my signature.

Mentioned: 191 Post(s)
Tagged: 2 Thread(s)
Quoted: 2910 Post(s)
Liked 2,830 Times in 1,457 Posts
So work is busy, my back is bother me and I am always tired but I was desperate to ride the 'Speckled Trout' so I did a few things. I changed the bar/stem combo for something more to my liking. I am no sold on the colors just yet, I'd like to be able to replicate this fit with a silver stem somehow.

his is a fabulous riding bike! I swapped out the dark Wolber clincher for some silver tubulars to brighten the bike up but they sure help the ride quality. Much to my surprise the cranks are actually 172.5!


The bars were already wrapped h3nce the splatter tape. Much to my surprise the brake levers are the early SR/C-Rec w/o a quick release button. I may swap these out for the later slghtly larger ones. I think Tektro RL520 levers would pair better with the 105 calipers but I don't think the come with a white hood.



The paint on this is just incredible


I unfortunately noticed a issue when changing the wheels. It seems the right wheel adjuster is broken off! Not sure just what I might do with that, maybe just a pair of thos bolt on spacers.



BTW the "Speckled Trout" monoker comes as much for this specialized KC-135 varient as it does the fish
__________________
One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"

Sugar "Kane" Kowalczyk

Last edited by Bianchigirll; 07-03-20 at 06:49 PM.
Bianchigirll is offline  
Likes For Bianchigirll:
Old 07-03-20, 03:39 PM
  #3274  
malcala622
Senior Member
 
malcala622's Avatar
 
Join Date: Oct 2014
Location: Pico Rivera, CA
Posts: 4,307

Bikes: 1983 Basso Gap...2013 Colnago CX-1...2015 Bianchi Intenso

Mentioned: 89 Post(s)
Tagged: 0 Thread(s)
Quoted: 1192 Post(s)
Liked 1,325 Times in 707 Posts
I finally got around to cleaning and lubing the drive train on my Tommasini. After putting the rear wheel back on I heard a grinding noise. Checked the pads, wheel alignment and possible chain rub. The noise is coming from the hub axle.

Good thing I didn't slap on the new veloflex tires. It'll have to go to the shop next week for a new axle.

An option I do have is build my recently purchased Campagnolo SR hubs with Mavic hoops and simply swap wheelset. Ill decide later.


malcala622 is offline  
Likes For malcala622:
Old 07-03-20, 06:58 PM
  #3275  
billnuke1 
Senior Member
 
billnuke1's Avatar
 
Join Date: Dec 2010
Location: St Cloud Fl.
Posts: 1,973

Bikes: Only my riders left...

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 350 Post(s)
Liked 782 Times in 389 Posts



Finally got back to this...I had moved some Raleigh bikes in to the shop to get ready to sell...they took up so much room! Anyhow they’re gone! I can move around the shop again!
billnuke1 is offline  
Likes For billnuke1:

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.