Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Show off your junk box builds

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Show off your junk box builds

Old 12-11-19, 12:41 PM
  #1  
norcalmike
Senior Member
Thread Starter
 
norcalmike's Avatar
 
Join Date: Aug 2017
Location: Salinas
Posts: 435
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 159 Post(s)
Liked 102 Times in 63 Posts
Show off your junk box builds

Im curious to see those builds made up entirely of junk you had lying around.
Those mix and match recyled parts coming together to live again.
norcalmike is offline  
Old 12-11-19, 12:51 PM
  #2  
OldsCOOL
Senior Member
 
OldsCOOL's Avatar
 
Join Date: Jul 2004
Location: northern michigan
Posts: 12,897

Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712

Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 556 Post(s)
Liked 295 Times in 160 Posts
How about a ‘76 Fuji “The Finest”? Traded for the frameset here and started piling on the junk. Cyclone 1st gen, Dura Ace brakes, and out popped this:


OldsCOOL is offline  
Likes For OldsCOOL:
Old 12-11-19, 12:59 PM
  #3  
onre
Member
 
onre's Avatar
 
Join Date: Aug 2018
Location: Akaa, Finland
Posts: 49
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 24 Post(s)
Liked 8 Times in 5 Posts
You, sir, have way too good stuff in your junk box.
onre is offline  
Likes For onre:
Old 12-11-19, 01:12 PM
  #4  
OldsCOOL
Senior Member
 
OldsCOOL's Avatar
 
Join Date: Jul 2004
Location: northern michigan
Posts: 12,897

Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712

Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 556 Post(s)
Liked 295 Times in 160 Posts
Originally Posted by onre View Post
You, sir, have way too good stuff in your junk box.
To confess, that at the time was the best I had. Funny thing, I did it just for fun. Fuji that year put a touring fork on it and that was a bike I rode maybe 3 times. The frame is now on display in my shop.
OldsCOOL is offline  
Old 12-11-19, 01:33 PM
  #5  
Spaghetti Legs 
Senior Member
 
Join Date: Dec 2014
Location: Central Virginia
Posts: 3,695

Bikes: Numerous

Mentioned: 83 Post(s)
Tagged: 0 Thread(s)
Quoted: 1055 Post(s)
Likes: 0
Liked 353 Times in 177 Posts
My wife’s commuter bike. Ross frame was very kindly gifted by rccardr and the rest of the parts sourced out of my parts bin. Notice mismatched brakes and levers. I’ve since added a matching rear fender, a gold accented bottle cage. I splurged and bought a close match fender compatible front brake, but still trying to find a fender that works. Frame is a little big for her so I had to slam the post, but wifey absolutely loves the bike and it rides smooth as buttah.
__________________
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '85 Moser, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘85 Pinarello Record
Spaghetti Legs is offline  
Old 12-11-19, 02:24 PM
  #6  
thumpism 
Bikes are okay, I guess.
 
thumpism's Avatar
 
Join Date: Jan 2015
Location: Richmond, Virginia
Posts: 5,868

Bikes: Waterford Paramount Touring, Trek 510 city build, Giant CFM-2, Raleigh Sports 3-speeds in M23 & L23, Schwinn Cimarron oddball build, Marin Palisades Trail dropbar conversion, Nishiki Cresta GT

Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 1693 Post(s)
Likes: 0
Liked 405 Times in 287 Posts
My Cimarron.

NR hubs with holes drilled oversize, $20 from a little advertising newspaper back in the early '80s. Homemade triple from a Fuji-branded Sugino Maxy II, warranty bars from a Schwinn High Sierra that the hanger broke off of, warranty broken Pletscher rack that I made into a seatstay mount, stuff like that.




thumpism is offline  
Likes For thumpism:
Old 12-11-19, 02:44 PM
  #7  
dweenk 
Senior Member
 
dweenk's Avatar
 
Join Date: Mar 2013
Location: Maryland
Posts: 3,456

Bikes: 1971 Fuji Finest, Royale, S-10-S, 1976 Motobecane Mirage, 1989 Trek 330, 1100, 1970 Raleigh Sport, and more

Mentioned: 47 Post(s)
Tagged: 0 Thread(s)
Quoted: 697 Post(s)
Liked 97 Times in 71 Posts
Originally Posted by OldsCOOL View Post
How about a ‘76 Fuji “The Finest”? Traded for the frameset here and started piling on the junk. Cyclone 1st gen, Dura Ace brakes, and out popped this:


I remember that bike - er frame. You really turned it into something nice.
__________________
"The man who does not read has no advantage over the man who cannot read." –Mark Twain
dweenk is offline  
Old 12-11-19, 02:52 PM
  #8  
norcalmike
Senior Member
Thread Starter
 
norcalmike's Avatar
 
Join Date: Aug 2017
Location: Salinas
Posts: 435
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 159 Post(s)
Liked 102 Times in 63 Posts
So far this is exactly what I was thinking.
nice!
norcalmike is offline  
Likes For norcalmike:
Old 12-11-19, 03:00 PM
  #9  
OldsCOOL
Senior Member
 
OldsCOOL's Avatar
 
Join Date: Jul 2004
Location: northern michigan
Posts: 12,897

Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712

Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 556 Post(s)
Liked 295 Times in 160 Posts
Originally Posted by dweenk View Post
I remember that bike - er frame. You really turned it into something nice.
Yes! I was going to search my PM list to see if that was you. That was a fun winter. I have put that frame in a very special place in my vintage (1930’s) shop. Thanks again for helping me out!
OldsCOOL is offline  
Old 12-11-19, 03:02 PM
  #10  
OldsCOOL
Senior Member
 
OldsCOOL's Avatar
 
Join Date: Jul 2004
Location: northern michigan
Posts: 12,897

Bikes: '77 Colnago Super, '76 Fuji The Finest, '88 Cannondale Criterium, '86 Trek 760, '87 Miyata 712

Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 556 Post(s)
Liked 295 Times in 160 Posts
Originally Posted by thumpism View Post
My Cimarron.

NR hubs with holes drilled oversize, $20 from a little advertising newspaper back in the early '80s. Homemade triple from a Fuji-branded Sugino Maxy II, warranty bars from a Schwinn High Sierra that the hanger broke off of, warranty broken Pletscher rack that I made into a seatstay mount, stuff like that.




I love the handlebar!
OldsCOOL is offline  
Old 12-11-19, 03:08 PM
  #11  
ryansu 
Ride.Smile.Repeat
 
ryansu's Avatar
 
Join Date: May 2011
Location: Seattle WA
Posts: 2,536

Bikes: 2009 Handsome Devil, 1978 Motobecane Grand Touring, 1987 Nishiki Cresta GT, Former bikes; 1986 Miyata Trail Runner, 1979 Miyata 912, 2011 VO Rando, 1999 Cannondale R800, 2012 Soma Smoothie, 1986 Schwinn Passage

Mentioned: 71 Post(s)
Tagged: 0 Thread(s)
Quoted: 675 Post(s)
Liked 315 Times in 231 Posts
Ok this is actual junk I was A) clearing out the parts bin and B) trying to make use of a old Frame I got for $5 at a co-op sale. I built it up as a Campus bike. I had everything on hand except the weird schwinn sized stem which fortunately the co-op had. Once upon a time it was a Schwinn Traveler

ryansu is offline  
Old 12-11-19, 04:04 PM
  #12  
JohnDThompson 
Old fart
 
JohnDThompson's Avatar
 
Join Date: Nov 2004
Location: Appleton WI
Posts: 21,437

Bikes: Several, mostly not name brands.

Mentioned: 125 Post(s)
Tagged: 0 Thread(s)
Quoted: 2129 Post(s)
Liked 480 Times in 337 Posts
My Viscount frankenbike. The only original part is the seat post. Front and rear brakes, the brake levers, tires, and the pedals match each other. Nothing else. I'm particularly proud of the crank and bottom bracket: SR Royal right arm with Sugino ring. Zeus left arm. Mounted on a SunTour track cartridge held in place with Phil mounting rings, and because of the Viscount's unusually narrow shell, a couple Dura-Ace lockrings to cover up where the mounting rings extended past the edge of the shell.

JohnDThompson is offline  
Likes For JohnDThompson:
Old 12-11-19, 04:18 PM
  #13  
Dfrost 
Senior Member
 
Dfrost's Avatar
 
Join Date: May 2013
Location: Pacific Northwest
Posts: 1,512

Bikes: ‘87 Marinoni SLX Sports Tourer, ‘79 Miyata 912 by Gugificazione

Mentioned: 129 Post(s)
Tagged: 0 Thread(s)
Quoted: 325 Post(s)
Liked 58 Times in 44 Posts
This build of the ‘79 Miyata 912, back when my spare parts bin was much better stocked, only required those gold cable housings, a 26.8mm seatpost, another bike computer (‘cuz I’m a data junkie), the quite effective Lezyne pump, bell, and eventually a different saddle since replaced by a variety of others (‘cuz of my princess b***). There have been quite a few mods since then, but getting this fun bike (purchased new) back on the road was the gateway drug to multiple bikes. I’m almost ashamed that I let the frame hang in the basement for so long before this build.


Last edited by Dfrost; 12-11-19 at 04:21 PM.
Dfrost is offline  
Likes For Dfrost:
Old 12-11-19, 04:23 PM
  #14  
francophile 
PM me your cotters
 
francophile's Avatar
 
Join Date: Jun 2015
Location: ATL
Posts: 2,895
Mentioned: 60 Post(s)
Tagged: 0 Thread(s)
Quoted: 780 Post(s)
Liked 207 Times in 157 Posts
I've got one in progress. Tweaker house in my neighborhood is getting demolished. We ended up donating about 25 bikes in various states of decay to the local co-op - it was literally a truck full, and a ton of parts, wheels, etc. to go with it. I grabbed one mostly-complete Korean-made Moto, and after this sat around for a few days, I figured someone needed to do it justice. Tons of surface rust (see the rear stay in the medium-sized pic below, especially drive side, under the caliper) and stem was severely stuck, probably the 3rd worst I've ever had to deal with. Took some ultra-fine bronze wool and soap to the tubing to knock off all the rust, then buffed and polished a couple of the worse areas to get some shine back on it. Still needs a little more elbow grease but there's only so much lipstick you can put on an old pig, er, Peug?

I didn't give up on it, and I'm really sad I didn't get "before" pics other than these two crappy ones from behind - the bike was an absolute disaster and it looks respectable now. Here a pic of the buildup in-process. I dug around in the bin, got some CLB racer brakes I was about to sell here for $12 or $15 or something, think I'm retrofitting with a SR Apex crank and either Suntour or Shimano stem shifters and mechs. I'll probably go with the rims/wheels that are on it even though I've got two nice pairs of Rigida steelies in the attic I could toss on it. Have a few Atax stems and steel bars floating around, but may go with alloy bars. See if I can get it under 23lbs when all is said and done, then sell it to a college kid for cheap.



francophile is offline  
Old 12-11-19, 05:42 PM
  #15  
Murray Missile 
Bike hoarder.
 
Murray Missile's Avatar
 
Join Date: Jun 2013
Location: 700 Ft. above sea level.
Posts: 2,091

Bikes: Just as many as there were awhile ago.

Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 260 Post(s)
Liked 151 Times in 87 Posts
I've done several "junk box" builds, here's my latest. This 1986 Bianchi Classica frame has been built up several times with junk parts then torn down again and the parts used elsewhere but this version may stick around for awhile. Everything on it is "junk box" with the exception of the fenders and tires which were bought new 4 or 5 years ago for another project that never panned out. I've tried these fenders are countless bikes and they never worked out for one reason or another, they went on this one like they were made for it.



__________________
".....distasteful and easily triggered."
Murray Missile is offline  
Old 12-11-19, 06:04 PM
  #16  
nlerner
Senior Member
 
Join Date: Dec 2005
Posts: 12,908
Mentioned: 285 Post(s)
Tagged: 0 Thread(s)
Quoted: 1488 Post(s)
Liked 545 Times in 321 Posts
I'm in the camp of those who've picked up frame sets or mostly incomplete bikes free or for cheap and then build them up with whatever you have for quick sale. Perhaps one of my more creative builds was this Phillips Manhattan (which actually came to me via eBay as a very trashed complete bike):

PhillipsManhattanFixie1.jpg
nlerner is offline  
Likes For nlerner:
Old 12-11-19, 06:11 PM
  #17  
bikemig 
Senior Member
 
bikemig's Avatar
 
Join Date: Apr 2012
Location: Middle Earth (aka IA)
Posts: 16,810

Bikes: A bunch of old bikes and a few new ones

Mentioned: 138 Post(s)
Tagged: 0 Thread(s)
Quoted: 4439 Post(s)
Liked 729 Times in 530 Posts
Junk box builds are some of my favorites. This one is a my commuter. I picked up the frame, shifters, and a few other bits for $10. It's a Bridgestone BB1:

bikemig is online now  
Likes For bikemig:
Old 12-11-19, 06:38 PM
  #18  
2cam16
Senior Member
 
2cam16's Avatar
 
Join Date: Oct 2016
Location: San Mateo,Ca.
Posts: 3,372

Bikes: TOO MANY

Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 799 Post(s)
Liked 306 Times in 220 Posts
This '94 Rockhopper was a freebie. It came with a no-name junk suspension fork with no brake bosses. I think the PO just slapped it on there to replace the oem fork. It sat in my stash for a year or so then I decided to make it my Winter beater. I had a Surly fork which was the perfect size to compensate for a sus fork. A cf seatpost which was the perfect size. Threw a bunch of parts on it from the bins and also from the forum's Box of Crap. Still a work in progress as I need a shorter stem.
IMG_1143 by 2cam16, on Flickr
IMG_1148 by 2cam16, on Flickr

Last edited by 2cam16; 12-11-19 at 06:41 PM.
2cam16 is offline  
Old 12-11-19, 06:49 PM
  #19  
Slightspeed
Senior Member
 
Slightspeed's Avatar
 
Join Date: Apr 2017
Location: Los Angeles, CA
Posts: 2,144

Bikes: 1964 Legnano Roma Olympiade, 1973 Raleigh Super Course, 1978 Raleigh Super Course, 1978 Peugeot PR10, 2002 Specialized Allez, 2007 Specialized Roubaix, 2013 Culprit Croz Blade

Mentioned: 62 Post(s)
Tagged: 0 Thread(s)
Quoted: 702 Post(s)
Liked 577 Times in 325 Posts
Found this '78 Raleigh Super Course for $20. I found a lightly used Brooks saddle on Ebay, new chain, new bar tape, pretty much everything else came from my spares.

As bought, $20 on local CL.

Turned out to be a nice ride. I had just built new wheels for my Legnano, so these were the old ones, mismatched Campy large flange hubs, unknown rims, 3 year old Gator 28s. Suntour derailleurs and shifters were spares that were laying around, as were the Shimano Exage aero levers, and SR Apex crank (was a triple). Ebay supplied newish B17 and new bar tape, KMC chain, pretty cheap build. Oh yeah, new Ebay cables and housing from Pork Chop BMX, too.
Slightspeed is offline  
Likes For Slightspeed:
Old 12-11-19, 06:59 PM
  #20  
cudak888 
www.theheadbadge.com
 
cudak888's Avatar
 
Join Date: Sep 2005
Location: Southern Florida
Posts: 25,030

Bikes: https://www.theheadbadge.com

Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 907 Post(s)
Liked 704 Times in 464 Posts
A true dog's dinner. The result after removing its aluminum 650A/EA3 wheels and Sturmey rear hub, along with whatever else could be used on alternate builds.

The bar tape was re-used too; just wrapped it so that the dirty bit would be primarily under the overlap.



__________________







cudak888 is offline  
Old 12-11-19, 07:15 PM
  #21  
curbtender
Senior Member
 
curbtender's Avatar
 
Join Date: Mar 2007
Location: SF Bay Area, East bay
Posts: 6,236

Bikes: Marinoni, Kestral 200 2002 Trek 5200, KHS Flite, Koga Miyata, Schwinn Spitfire 5, Schwinn Speedster, Mondia Special, Univega Alpina, Miyata team Ti, MB3

Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 783 Post(s)
Liked 277 Times in 204 Posts

True junk pile build. What it needs is a Raleigh Sport donor.
curbtender is offline  
Likes For curbtender:
Old 12-12-19, 01:50 AM
  #22  
norcalmike
Senior Member
Thread Starter
 
norcalmike's Avatar
 
Join Date: Aug 2017
Location: Salinas
Posts: 435
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 159 Post(s)
Liked 102 Times in 63 Posts
Originally Posted by Dfrost View Post
This build of the ‘79 Miyata 912, back when my spare parts bin was much better stocked, only required those gold cable housings, a 26.8mm seatpost, another bike computer (‘cuz I’m a data junkie), the quite effective Lezyne pump, bell, and eventually a different saddle since replaced by a variety of others (‘cuz of my princess b***). There have been quite a few mods since then, but getting this fun bike (purchased new) back on the road was the gateway drug to multiple bikes. I’m almost ashamed that I let the frame hang in the basement for so long before this build.

Nice! i have a soft spot for that era of 912's
All these builds are Sweet!
Lomg live the frankenbikes
norcalmike is offline  
Old 12-12-19, 06:14 AM
  #23  
cudak888 
www.theheadbadge.com
 
cudak888's Avatar
 
Join Date: Sep 2005
Location: Southern Florida
Posts: 25,030

Bikes: https://www.theheadbadge.com

Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 907 Post(s)
Liked 704 Times in 464 Posts
Originally Posted by curbtender View Post
True junk pile build. What it needs is a Raleigh Sport donor.
Looks better like that; almost unrecognizable. It'd be a crime to EA3 it again.

-Kurt
__________________







cudak888 is offline  
Old 12-12-19, 03:37 PM
  #24  
canklecat
Me duelen las nalgas
 
canklecat's Avatar
 
Join Date: Aug 2015
Location: Texas
Posts: 11,161

Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel

Mentioned: 182 Post(s)
Tagged: 0 Thread(s)
Quoted: 3550 Post(s)
Liked 1,040 Times in 699 Posts
Mine isn't assembled yet, and the frame won't be C&V. It's a circa 2014 Diamondback Podium carbon fiber frame, but it'll wear a Dura Ace RD, 105 front derailleur, 1980s Nitto drop bar, Shimano 600 brake levers, 105 brakes, Dura Ace bar-end shifters, the original Ultegra crankset, and DT Swiss wheels. Just what I already had in a bin, not that it makes any sense.

If I like the frame well enough after the initial build I might spring for a more cohesive component set and redo it.
canklecat is offline  
Old 12-13-19, 10:19 AM
  #25  
dufeau
Senior Member
 
Join Date: Nov 2016
Location: Naptown
Posts: 52

Bikes: '77 Trek TX-900 | 2003 Circle A fixie | 70s PUCH pathfinder | '50s unknown pathracer | 70's Libertas | 70s Romani | Gitane folder

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 14 Post(s)
Liked 2 Times in 1 Post

This is my Puch Pathfinder that I converted to a winter bike with a 3x5 group with a SunTour Cyclone rear derailleur
dufeau is offline  
Likes For dufeau:

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information

Copyright © 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.