Aluminum aero tubulars?
#1
Cat 4 roadkill
Thread Starter
Join Date: Jan 2009
Location: Austin, TX
Posts: 190
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Aluminum aero tubulars?
So I've got a tax refund coming in, and I've been lusting after a new wheelset. I was wondering whether it was worth building up some aluminum aero wheels, or whether I'm better off saving my money until I can afford carbon. Right now, I'm doing most of my training on box-section tubulars that I built up for cross. I really like the ride quality, but they're noticeably slower on the flats than my crappy Ultegra clinchers (WH-R600).
I'm wondering if it's a terrible idea to build up some aluminum aero wheels. I was looking at the Velocity Pro Elite rims, which are basically the tubular version of the Deep V. However, the weight is a little absurd - 582 g, compared to 375 g for a Mavic Reflex. I'd be building them up with bladed spokes, either Sapim or DT, and probably lacing them to Dura-Ace hubs, although I've also considered DT 240s.
Would that be a wheelset worth owning? Last season, I mostly raced crits, where the weight wouldn't be such a big deal, but I'm trying to make it out to a lot more RR's this season. Is it going to be impossible to spin these up when the pack surges? Will they put me at a disadvantage vs. either of the other wheelsets I own? Are Deep Vs/Pro Elites even appropriate rims for road racing?
I'm wondering if it's a terrible idea to build up some aluminum aero wheels. I was looking at the Velocity Pro Elite rims, which are basically the tubular version of the Deep V. However, the weight is a little absurd - 582 g, compared to 375 g for a Mavic Reflex. I'd be building them up with bladed spokes, either Sapim or DT, and probably lacing them to Dura-Ace hubs, although I've also considered DT 240s.
Would that be a wheelset worth owning? Last season, I mostly raced crits, where the weight wouldn't be such a big deal, but I'm trying to make it out to a lot more RR's this season. Is it going to be impossible to spin these up when the pack surges? Will they put me at a disadvantage vs. either of the other wheelsets I own? Are Deep Vs/Pro Elites even appropriate rims for road racing?
#2
pan y agua
Join Date: Aug 2005
Location: Jacksonville
Posts: 31,304
Bikes: Willier Zero 7; Merlin Extralight; Calfee Dragonfly tandem, Calfee Adventure tandem; Cervelo P2; Motebecane Ti Fly 29er; Motebecanne Phantom Cross; Schwinn Paramount Track bike
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1447 Post(s)
Liked 728 Times
in
373 Posts
Personally, I'd save the money. Sounds like you've got two sets of serviceable wheels.
30mm deep aluminum rims are not going to be a whole lot more aero. So rather than paying a fiar chunck of change for at most a very marginal improvement, save toward something more worthwhile.
Or better yet, if you don't already have a power meter , get the PT Comp deal on Competitive Cyclist.
30mm deep aluminum rims are not going to be a whole lot more aero. So rather than paying a fiar chunck of change for at most a very marginal improvement, save toward something more worthwhile.
Or better yet, if you don't already have a power meter , get the PT Comp deal on Competitive Cyclist.
__________________
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
#3
Primate
Join Date: Jan 2006
Location: gone
Posts: 2,579
Bikes: Concorde Columbus SL, Rocky Mountain Edge, Sparta stadfiets
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 5 Times
in
5 Posts
There's a thread going right now. https://www.bikeforums.net/showthread.php?t=506538
Apparently there are those who say the weight of your rims doesn't matter. I say those Velocitys sound heavy.
Apparently there are those who say the weight of your rims doesn't matter. I say those Velocitys sound heavy.
#4
Cat 4 roadkill
Thread Starter
Join Date: Jan 2009
Location: Austin, TX
Posts: 190
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Yeah, if it's still around when I get the money, I might do that. I'd want to re-lace the hub to a tubular, though - I've been training on tubs for the last few months, and I'm totally hooked.
#5
slow up hills
Join Date: Mar 2006
Location: Seattle, WA
Posts: 4,931
Bikes: Giant TCR, Redline CX, Ritchey Breakaway, Spec S-works epic
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#6
Senior Member
Join Date: Dec 2005
Location: Charlottesville, Virginia
Posts: 1,990
Bikes: Dawes Kalahari, Puch Prima Super Sport, Graham Weigh 853
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
I recommend you try and find some older Campagnolo Shamal type wheels. Many of those came in tubular because they were popular with TT riders. I'd imagine the original Shamal was reasonably aero, although I can't say for sure. FIR and Gipiemme made similar wheels such as the Super Rialto and the Tecno 416 (this one is still available and also as a tubular - the key is finding the distributor...).
#7
shut up and ride
Join Date: Nov 2005
Location: noho
Posts: 1,947
Bikes: supersix hi-mod,burley duet tandem,woodrup track,cannondale cross,specialized road
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 2 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
i saw a 40 mm deep aluminum wheelset that wasn't too heavy but i can't remember who made it. anyone else know?
#8
sidelined
Join Date: Apr 2008
Posts: 342
Bikes: 2005 Scattante R660, Kona Race Light SS conversion, 2007 Schwinn Fastback CX
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#9
Senior Member
#10
Cat 4 roadkill
Thread Starter
Join Date: Jan 2009
Location: Austin, TX
Posts: 190
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#11
Super Moderator
Join Date: Jul 2004
Location: Ffld Cnty Connecticut
Posts: 21,843
Bikes: Old Steelies I made, Old Cannondales
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1173 Post(s)
Liked 927 Times
in
612 Posts
So I've got a tax refund coming in, and I've been lusting after a new wheelset. I was wondering whether it was worth building up some aluminum aero wheels, or whether I'm better off saving my money until I can afford carbon. Right now, I'm doing most of my training on box-section tubulars that I built up for cross. I really like the ride quality, but they're noticeably slower on the flats than my crappy Ultegra clinchers (WH-R600).
__________________
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
Bikes: Old steel race bikes, old Cannondale race bikes, less old Cannondale race bike, crappy old mtn bike.
FYI: https://www.bikeforums.net/forum-sugg...ad-please.html
#13
Senior Member
Join Date: Dec 2005
Location: Charlottesville, Virginia
Posts: 1,990
Bikes: Dawes Kalahari, Puch Prima Super Sport, Graham Weigh 853
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
The H+Son rims are very expensive, heavy and not proven. I'd rather go for Gipiemme's or NOS FIR or Campagnolo rims. I think the tubular part of the equation limits the OP to one rim in current production, namely the Gipiemme Techno 716. But Gipiemme does not seem to have US distribution atm, so you would probably have to get them from Europe.
#14
Over the hill
Join Date: Mar 2006
Location: Los Angeles, CA
Posts: 24,376
Bikes: Giant Defy, Giant Revolt
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 998 Post(s)
Liked 1,206 Times
in
692 Posts
Yes, I've read some pretty disturbing reviews on the H+Son rims, and they were really made to appeal to the fixie hipster crowd for bling, not to racers for speed.
__________________
It's like riding a bicycle
It's like riding a bicycle