Fly 6 stopping
#1
Senior Member
Thread Starter
Fly 6 stopping
Hi all, it's been a while, but I'm back to the commute and I'm having a tech issue. I had an original Fly 6, and it just would randomly stop recording. Being as this was an original model, I figured maybe the tip over sensor was bad, or something similar, so I went out and bought a newer generation one, the 2nd gen actually, used but it seemed fine. Well after two rides, it appears it's started doing the same thing, one time it will get my whole ride, and another time it will just stop recording part way though the ride. I'm not sure what this could be, I've updated the firmware. I'm just fishing to see if anyone is familiar with these and has had anything similar happen. Thanks in advance!
Joe
Joe
#2
Señior Member
Join Date: Sep 2005
Location: Michigan
Posts: 13,749
Bikes: Windsor Fens, Giant Seek 0 (2014, Alfine 8 + discs)
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 446 Post(s)
Likes: 0
Liked 8 Times
in
7 Posts
Tech support at Cycliq is very good.
__________________
Work: the 8 hours that separates bike rides.
Work: the 8 hours that separates bike rides.
#3
Master Sarcaster
Join Date: Apr 2006
Location: DFW, Texas
Posts: 527
Bikes: 2018 Allez Sprint, 2016 Trek Crockett Canti
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 190 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Agreed that Cycliq's tech support is great, I'd reach out to them.
That being said, some things to look for is to make sure you don't have locked files on the SD card. If it gets to a point where it fills up and can't overwrite the files, that's definitely going to cause problems. If you have the new Fly6 CE you can have it reformat the SD card from the App. If you have the older v2 you can tell it to re-format the SD card in the config file. I ran into a similar issue with my v2 and having the device reformat the SD card instead of doing it myself on my computer resolved the issue.
That being said, some things to look for is to make sure you don't have locked files on the SD card. If it gets to a point where it fills up and can't overwrite the files, that's definitely going to cause problems. If you have the new Fly6 CE you can have it reformat the SD card from the App. If you have the older v2 you can tell it to re-format the SD card in the config file. I ran into a similar issue with my v2 and having the device reformat the SD card instead of doing it myself on my computer resolved the issue.
#4
Senior Member
Thread Starter
Agreed that Cycliq's tech support is great, I'd reach out to them.
That being said, some things to look for is to make sure you don't have locked files on the SD card. If it gets to a point where it fills up and can't overwrite the files, that's definitely going to cause problems. If you have the new Fly6 CE you can have it reformat the SD card from the App. If you have the older v2 you can tell it to re-format the SD card in the config file. I ran into a similar issue with my v2 and having the device reformat the SD card instead of doing it myself on my computer resolved the issue.
That being said, some things to look for is to make sure you don't have locked files on the SD card. If it gets to a point where it fills up and can't overwrite the files, that's definitely going to cause problems. If you have the new Fly6 CE you can have it reformat the SD card from the App. If you have the older v2 you can tell it to re-format the SD card in the config file. I ran into a similar issue with my v2 and having the device reformat the SD card instead of doing it myself on my computer resolved the issue.
Ok, just tried that, I'll see how it does over the rest of the week. Thanks!
Joe
#5
Señior Member
Join Date: Sep 2005
Location: Michigan
Posts: 13,749
Bikes: Windsor Fens, Giant Seek 0 (2014, Alfine 8 + discs)
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 446 Post(s)
Likes: 0
Liked 8 Times
in
7 Posts
On any camera, dashcam, whatever, that's set on loop recording, I think it's a good idea to format the card periodically.
__________________
Work: the 8 hours that separates bike rides.
Work: the 8 hours that separates bike rides.
#6
Senior Member
Thread Starter
Update, I'm pretty sure it's the battery. I take the device off charge, it gives 4 beeps, indicating full charge when I turn it on, I start the recording, and now it's only getting two clips, less than 20 mins total record time, every time. I contacted cyclq for support, we will see what they say, I'd love to get a slight discount on their fancy new Fly6 CE model, that would make me a very happy biker! I'll update here when I know more.
Joe
Joe
#7
Master Sarcaster
Join Date: Apr 2006
Location: DFW, Texas
Posts: 527
Bikes: 2018 Allez Sprint, 2016 Trek Crockett Canti
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 190 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Update, I'm pretty sure it's the battery. I take the device off charge, it gives 4 beeps, indicating full charge when I turn it on, I start the recording, and now it's only getting two clips, less than 20 mins total record time, every time. I contacted cyclq for support, we will see what they say, I'd love to get a slight discount on their fancy new Fly6 CE model, that would make me a very happy biker! I'll update here when I know more.
Joe
Joe
That being said... I have the new CE's and I really like them. 1080p on the 6 is nice and having two bikes, the 1/4 turn mounts work so much better than dealing with rubber straps or velcro if you buy some extra mounts.
#8
Senior Member
Thread Starter
There's a lot of things that can affect the charge level of rechargeable batteries. If I remember correctly, the Fly6 has just a standard 18650 Li-Ion battery soldered into it. If you're good with a soldering iron, you could probably replace it if you're out of warranty and they don't want to help you out. In general, it's better to recharge the battery more frequently rather than let it get "low" and recharge it when it's near empty.
That being said... I have the new CE's and I really like them. 1080p on the 6 is nice and having two bikes, the 1/4 turn mounts work so much better than dealing with rubber straps or velcro if you buy some extra mounts.
That being said... I have the new CE's and I really like them. 1080p on the 6 is nice and having two bikes, the 1/4 turn mounts work so much better than dealing with rubber straps or velcro if you buy some extra mounts.
Joe