26.0 Gravel bars
04-20-20, 03:59 PM
#1
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Stillwater, OK
Posts: 7,827
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 1872 Post(s)
Liked 692 Times
in
468 Posts
26.0 Gravel bars
I'm looking for a modern 26.0 silver gravel bar. 31.8 are worthy of adding to the list but I'm personally focusing on 26.0 and flared bars right now for my build. I'll update this post as you all add options.
Lots of options at Velo Orange: https://velo-orange.com/collections/handlebars
Salsa Cowbell and Cowchipper in silver (31.8): https://salsacycles.com/components/c...oad_handlebars
Nitto B132 & B135 Randonneur: https://www.treefortbikes.com/filt/1...-ratings....--
Soma Portola: https://www.somafab.com/archives/product/portola-bar
Origin8 Gary II: https://origin8.bike/product/gary-ii-bar-33961
Nitto x Crust Shaka bar: 26.0 clamp, a little flare, shallow drop, wide as hell: https://crustbikes.com/collections/h...rust-shaka-bar
Lots of options at Velo Orange: https://velo-orange.com/collections/handlebars
Salsa Cowbell and Cowchipper in silver (31.8): https://salsacycles.com/components/c...oad_handlebars
Nitto B132 & B135 Randonneur: https://www.treefortbikes.com/filt/1...-ratings....--
Soma Portola: https://www.somafab.com/archives/product/portola-bar
Origin8 Gary II: https://origin8.bike/product/gary-ii-bar-33961
Nitto x Crust Shaka bar: 26.0 clamp, a little flare, shallow drop, wide as hell: https://crustbikes.com/collections/h...rust-shaka-bar
__________________
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
Last edited by shoota; 01-14-21 at 02:46 PM.
04-20-20, 09:33 PM
#2
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,614
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10963 Post(s)
Liked 7,489 Times
in
4,189 Posts
The old Origin8 Gary II bar is 25.4 so you could easily shim it to fit a 26.0 stem.
Gary II Bar
https://www.amazon.com/Origin8-Gary-2-Bar/dp/B00RNFRPY4
For a short while I had some Nitto Rando bars on an old refurbished early 80s frame- disliked those bars to no end. Nitto measured width at the drops, which are flared, so the tops were absurdly narrow. It was like I was riding 38s when I had 42s(which is also more narrow than ideal for me). Just worth mentioning if you haven't used them before.
Gary II Bar
https://www.amazon.com/Origin8-Gary-2-Bar/dp/B00RNFRPY4
For a short while I had some Nitto Rando bars on an old refurbished early 80s frame- disliked those bars to no end. Nitto measured width at the drops, which are flared, so the tops were absurdly narrow. It was like I was riding 38s when I had 42s(which is also more narrow than ideal for me). Just worth mentioning if you haven't used them before.
05-14-20, 06:21 PM
#3
Full Member
Nitto x Crust Shaka bar: 26.0 clamp, a little flare, shallow drop, wide as hell.
https://www.crustbikes.com/products/...ust-shaka-bar/
https://www.crustbikes.com/products/...ust-shaka-bar/
05-23-20, 03:45 PM
#4
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Stillwater, OK
Posts: 7,827
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 1872 Post(s)
Liked 692 Times
in
468 Posts
Nitto x Crust Shaka bar: 26.0 clamp, a little flare, shallow drop, wide as hell.
https://www.crustbikes.com/products/...ust-shaka-bar/
https://www.crustbikes.com/products/...ust-shaka-bar/
__________________
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
06-15-20, 08:41 AM
#5
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Stillwater, OK
Posts: 7,827
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 1872 Post(s)
Liked 692 Times
in
468 Posts
Any more 25.4 bars out there to look at?
__________________
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
06-15-20, 08:59 AM
#6
Full Member
I haven't seen any. Out of curiosity, why are you looking? Is there, in your experience, something to the claim that skinnier bars/stems are noticably more compliant?
06-15-20, 09:03 AM
#7
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Stillwater, OK
Posts: 7,827
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 1872 Post(s)
Liked 692 Times
in
468 Posts
Naw, it's nothing more than compatibility with older bikes that use quill stems.
__________________
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
06-15-20, 09:40 AM
#8
Senior Member
Join Date: Feb 2011
Location: adelaide, australia
Posts: 2,798
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 227 Post(s)
Liked 390 Times
in
149 Posts
I couldn't do a link for some reason but i bought a couple pairs of these being cheap in 420mm wider than normal for me for better control offroad. They need an opening stem as the tops bend is too sharp though I did get a SR Royal stem though them after trying many. If there going on a steel frame then yes 26mm looks more appropriate to me.
Likes For jbchybridrider:
06-15-20, 10:27 AM
#9
Senior Member
Thread Starter
Join Date: Jun 2012
Location: Stillwater, OK
Posts: 7,827
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 1872 Post(s)
Liked 692 Times
in
468 Posts
I couldn't do a link for some reason but i bought a couple pairs of these being cheap in 420mm wider than normal for me for better control offroad. They need an opening stem as the tops bend is too sharp though I did get a SR Royal stem though them after trying many. If there going on a steel frame then yes 26mm looks more appropriate to me.
__________________
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
2014 Cannondale SuperSix EVO 2
2019 Salsa Warbird
Last edited by shoota; 08-10-20 at 11:30 AM.
