Hayes Hydraulic disc brakes
#1
Newbie
Thread Starter
Join Date: Aug 2020
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hayes Hydraulic disc brakes
I own an 02 rocky mountain slayer with hayes hydraulic brakes. the brakes squeak when under a lot of pressure like going downhill on the trails, and I can kinda feel the squeaking. Just wondering if I might need to bleed the brakes? Or is it something else? I just bought the bike a few days ago and the owner hadn't ridden it for a long time. Any help appreciated thanks.
#2
Senior Member
Join Date: Jul 2019
Location: In the south but from North
Posts: 700
Bikes: Turner 5-Spot Burner converted; IBIS Ripley, Specialized Crave, Tommasini Sintesi, Cinelli Superstar, Tommasini X-Fire Gravel
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 406 Post(s)
Liked 389 Times
in
219 Posts
When is the last time you changed the pads? Noisy disc brakes (on cars as well!) are generally a sign of worn pads. No need to bleed the brakes if the lever feel is fine.
#3
Noob
Join Date: Sep 2011
Location: Essex, UK
Posts: 76
Bikes: Specialized Rockhopper Expert Disc 2009, Ridgeback Nemesis (Afine 8) 2011
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Depending on the brake material, sounds like the pads might have glazed. If you didn't want to spend any money, you could take them out and give them a sand (put sandpaper on flat surface, rub pads on them) and reinstall (then re-bed in). Otherwise I would get a fresh set.
#4
Senior Member
Join Date: May 2004
Location: Southern California
Posts: 2,191
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 114 Post(s)
Liked 119 Times
in
92 Posts
The squealing is probably at the pad to rotor interface, and not related to the hydraulic system (ie don't need to bleed, unless the levers feel mushy all the time). In addition to new pads, you might want to clean the rotor too. Wipe off any dirt/grime, then remove any grease with denatured or rubbing alcohol. The alcohols dry "cleanly" and do not leave a residue behind. In fact, try cleaning the rotors first and see if that helps. My policy is to do the cheap/easy things first. However, you may want to also get new pads since you don't know the history of them, and braking is a good feature.