Knee and Bike Damage but riding again - at last..!
#1
Senior Member
Thread Starter
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,674
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,751 Times
in
938 Posts
Knee and Bike Damage but riding again - at last..!
I had a fall (carrying fire wood) last Fall, just before I headed out for my winter riding in Jamaica. Well, the knee was shot, so no riding. And, someone had attempted to install a pedal on my bike, destroying the threads, in the poorly executed process. So the bike sat, my cane got a lot of use, and I finally started riding the motorcycle, after six weeks in Jamaica. However..
Today, after replacing the good crank set with an all steel POS VeloLion aftermarket thing, I was, pretty much good to go. So, I slipped on my new SPD bike shoes, my new half finger padded gloves and off I went.
The crank, kindaa sorts worked OK. The chain needs to be lubed and/or replaced but it worked and even allowed a bit of shifting. The bottom bracket fet gritty, and, after taking it apart, was found to be filled with aluminium filings (???). One can olny wonder where they came from. But the balls and races were pristine so in they went, then, seeking a not so great hammer and even less great screwdriver, I installed, greased and adjusted the BB. All good, now.
And that first ride put a not gonna go away soon smile on my face. Tomorrow morning, a new eight speed chain, and away for a real ride. Yahoo!
Oh yah, that old carb came off of my motorcycle and was replaced with a brand new one that, actually, works.
Today, after replacing the good crank set with an all steel POS VeloLion aftermarket thing, I was, pretty much good to go. So, I slipped on my new SPD bike shoes, my new half finger padded gloves and off I went.
The crank, kindaa sorts worked OK. The chain needs to be lubed and/or replaced but it worked and even allowed a bit of shifting. The bottom bracket fet gritty, and, after taking it apart, was found to be filled with aluminium filings (???). One can olny wonder where they came from. But the balls and races were pristine so in they went, then, seeking a not so great hammer and even less great screwdriver, I installed, greased and adjusted the BB. All good, now.
And that first ride put a not gonna go away soon smile on my face. Tomorrow morning, a new eight speed chain, and away for a real ride. Yahoo!
Oh yah, that old carb came off of my motorcycle and was replaced with a brand new one that, actually, works.
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
Likes For randyjawa:
#2
Senior Member
Join Date: Aug 2010
Location: Central Florida, USA
Posts: 1,991
Bikes: Litespeed (9); Slingshot (9); Specialized (3); Kestrel (2); Cervelo (1); FELT (1); Trek (2)
Mentioned: 39 Post(s)
Tagged: 0 Thread(s)
Quoted: 436 Post(s)
Liked 3,471 Times
in
999 Posts
I'm happy to hear your knee is healing well enough to ride and you have a positive attitude. I imagine being in Jamaica helps the latter, especially now.
So now are you the Velo Lion? Lion in Winter?
For some reason, your story makes me want to see a photo of your full ride with the cane in it.
So now are you the Velo Lion? Lion in Winter?
For some reason, your story makes me want to see a photo of your full ride with the cane in it.
__________________
WTB: Slingshot bicycle promotional documents (catalog, pamphlets, etc).
WTB: American Cycling May - Aug, Oct, Dec 1966.
WTB: Bicycle Guide issues 1984 (any); Jun 1987; Jul, Nov/Dec 1992; Apr 1994; 1996 -1998 (any)
WTB: Bike World issue Jun 1974.
WTB: Slingshot bicycle promotional documents (catalog, pamphlets, etc).
WTB: American Cycling May - Aug, Oct, Dec 1966.
WTB: Bicycle Guide issues 1984 (any); Jun 1987; Jul, Nov/Dec 1992; Apr 1994; 1996 -1998 (any)
WTB: Bike World issue Jun 1974.
#3
Mr. Anachronism
Join Date: Jan 2013
Location: Somewhere west of Tobie's
Posts: 2,087
Bikes: fillet-brazed Chicago Schwinns, and some other stuff
Mentioned: 29 Post(s)
Tagged: 0 Thread(s)
Quoted: 526 Post(s)
Liked 256 Times
in
165 Posts
WOOO HOOO!!! Glad to read this, Randy.
__________________
"My only true wisdom is in knowing I have none" -Socrates
"My only true wisdom is in knowing I have none" -Socrates
#4
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,004
Bikes: Yes, please.
Mentioned: 280 Post(s)
Tagged: 0 Thread(s)
Quoted: 2198 Post(s)
Liked 4,600 Times
in
1,764 Posts
You got a carburettor on your bike? I'd figured you'd be an injection man.
Last edited by non-fixie; 01-16-20 at 12:55 PM. Reason: added smiley just to be sure
#5
Banned
Join Date: Aug 2013
Posts: 6,480
Mentioned: 93 Post(s)
Tagged: 0 Thread(s)
Quoted: 1361 Post(s)
Likes: 0
Liked 423 Times
in
282 Posts
Glad you're on the mend and riding.
I know 'nuttin about that bikey monkey business but I'd take that cane of yours and beat whoever macked up your pedal and sabotage attempt on the bottom bracket.
Ps. Is that carb some sort of Mikuni round smooth bore? They're one of the best and simple field serviceable.
I know 'nuttin about that bikey monkey business but I'd take that cane of yours and beat whoever macked up your pedal and sabotage attempt on the bottom bracket.
Ps. Is that carb some sort of Mikuni round smooth bore? They're one of the best and simple field serviceable.
#6
Senior Member
Join Date: Jul 2006
Location: San Jose (Willow Glen) Ca
Posts: 9,844
Bikes: Kirk Custom JK Special, '84 Team Miyata,(dura ace old school) 80?? SR Semi-Pro 600 Arabesque
Mentioned: 106 Post(s)
Tagged: 0 Thread(s)
Quoted: 2338 Post(s)
Liked 2,822 Times
in
1,541 Posts
= good job
__________________
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
Life is too short not to ride the best bike you have, as much as you can
(looking for Torpado Super light frame/fork or for Raleigh International frame fork 58cm)
#7
Partially Sane.
Join Date: Jan 2016
Location: Sunny Sacramento.
Posts: 3,559
Bikes: Soma Saga, pre-disc
Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 972 Post(s)
Likes: 0
Liked 643 Times
in
468 Posts
It almost sounds like you’ve been (cough cough) sampling the local foliage. 🤔😁😉 Good luck on that healing. It can be a tricky business. 😎😉
#8
PM me your cotters
Join Date: Jun 2015
Location: ATL
Posts: 3,241
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 1137 Post(s)
Liked 590 Times
in
422 Posts
I had a tough one last year, sucks not being able to get in the saddle.
Aluminum filings ... check the seat post? Maybe parts got ground off on insertion and trickled down the seat tube?
That crankset, my friend, is ghastly.
Aluminum filings ... check the seat post? Maybe parts got ground off on insertion and trickled down the seat tube?
That crankset, my friend, is ghastly.
Likes For francophile:
#10
Thrifty Bill
Join Date: Jan 2008
Location: Mountains of Western NC
Posts: 23,524
Bikes: 86 Katakura Silk, 87 Prologue X2, 88 Cimarron LE, 1975 Sekai 4000 Professional, 73 Paramount, plus more
Mentioned: 96 Post(s)
Tagged: 0 Thread(s)
Quoted: 1236 Post(s)
Liked 964 Times
in
628 Posts
Good to hear Randy! Ride safe!
#12
Senior Member
Thread Starter
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,674
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,751 Times
in
938 Posts
Well, I am NOT Tour de France material but I got from here to there and back to hear without too much pain. Man oh man - is it good to ride again...
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
#13
Zip tie Karen
Join Date: Aug 2009
Location: Fair Oaks Ranch, TX
Posts: 7,004
Bikes: '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '18 Velobuild VB-R-022, '21 Tsunami SNM-100
Mentioned: 26 Post(s)
Tagged: 0 Thread(s)
Quoted: 1465 Post(s)
Liked 1,542 Times
in
806 Posts
I've read that Jamaican rum may have medicinal qualities...
#14
Senior Member
Join Date: Dec 2016
Location: Long Island, NY
Posts: 2,109
Bikes: Trek 800 x 2, Schwinn Heavy Duti, Schwinn Traveler, Schwinn Le Tour Luxe, Schwinn Continental, Cannondale M400 and Lambert, Schwinn Super Sport
Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 809 Post(s)
Liked 1,022 Times
in
665 Posts
Glad to hear your feeling better. Thank for posting the picture of the bike. The bike makes the cranks set look not so bad. I know the key thing is that you needed a crankset to ride.
Perhaps the original crankset could have the pedal threads repaired by rethreading it with a heli-coil thread?
Perhaps the original crankset could have the pedal threads repaired by rethreading it with a heli-coil thread?
#15
Senior Member
Join Date: Mar 2007
Location: SF Bay Area, East bay
Posts: 7,658
Bikes: Miyata 618 GT, Marinoni, Kestral 200 2002 Trek 5200, KHS Flite, Koga Miyata, Schwinn Spitfire 5, Mondia Special, Univega Alpina, Miyata team Ti, Santa Cruz Highball
Mentioned: 53 Post(s)
Tagged: 0 Thread(s)
Quoted: 1608 Post(s)
Liked 2,589 Times
in
1,224 Posts
#16
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,634
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4678 Post(s)
Liked 5,795 Times
in
2,281 Posts
Naw, injection is for carbon fiber bikes, carbs are C&V.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#17
Senior Member
Join Date: Jan 2004
Location: Madison, WI USA
Posts: 6,154
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 2363 Post(s)
Liked 1,749 Times
in
1,191 Posts
Maybe some previous owner had to saw out a stuck seat post, and just let the aluminium bits fall into the BB shell?
Glad to hear you're on the mend. In the '90s, my brother cycled across Michigan, from Detroit to Sleeping Bear Dunes park, with his ankle in a cast and crutches strapped to the frame. Took the ferry from Ludington to Manitowoc WI, got back on his bike, I picked him up (by car) in Port Washington, and we had a blast at IrishFest in Milwaukee.
That looks like a Chinese finger torture trap for giants, re-purposed as a bottle recycler.
Glad to hear you're on the mend. In the '90s, my brother cycled across Michigan, from Detroit to Sleeping Bear Dunes park, with his ankle in a cast and crutches strapped to the frame. Took the ferry from Ludington to Manitowoc WI, got back on his bike, I picked him up (by car) in Port Washington, and we had a blast at IrishFest in Milwaukee.
That looks like a Chinese finger torture trap for giants, re-purposed as a bottle recycler.
#18
Seńor Member
Join Date: Oct 2004
Location: Hardy, VA
Posts: 17,923
Bikes: Mostly English - predominantly Raleighs
Mentioned: 70 Post(s)
Tagged: 0 Thread(s)
Quoted: 1491 Post(s)
Liked 1,090 Times
in
638 Posts
I didn't realize that you'd gotten injured. Good to hear you're back to riding. I had my first experience with a forced layoff this past year as well, and I did not care for it.
__________________
In search of what to search for.
In search of what to search for.
#20
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,004
Bikes: Yes, please.
Mentioned: 280 Post(s)
Tagged: 0 Thread(s)
Quoted: 2198 Post(s)
Liked 4,600 Times
in
1,764 Posts
While I see your point, one of the most sophisticated C&V fuel systems was Alfa Romeo's SPICA mechanical injection system. Dates from the 1940's.
#21
Senior Member
Thread Starter
Join Date: Apr 2007
Location: Thunder Bay, Ontario, Canada - burrrrr!
Posts: 11,674
Bikes: 1958 Rabeneick 120D, 1968 Legnano Gran Premio, 196? Torpado Professional, 2000 Marinoni Piuma
Mentioned: 210 Post(s)
Tagged: 0 Thread(s)
Quoted: 1372 Post(s)
Likes: 0
Liked 1,751 Times
in
938 Posts
You got a carburettor on your bike? I'd figured you'd be an injection man.
Those fish things are there to help with plastic bottle disposal and they REALLY work well. Just two days ago, the truck and crew came by and emptied them out. In my mind, a creative way to help protect Mother Earth and it looks good too, Looks good - anyone else know how to make plastic bottle disposal easier and more attractive...
__________________
"98% of the bikes I buy are projects".
"98% of the bikes I buy are projects".
Likes For randyjawa:
#22
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,509
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2746 Post(s)
Liked 3,390 Times
in
2,053 Posts
Now you just need some blue tires on that bike.
Glad you're back on the road
Glad you're back on the road
#23
Senior Member
Join Date: Jan 2004
Location: Madison, WI USA
Posts: 6,154
Mentioned: 50 Post(s)
Tagged: 0 Thread(s)
Quoted: 2363 Post(s)
Liked 1,749 Times
in
1,191 Posts
So is the fade on the muffler just a natural outcome of the heating, or was it intentional? Cool, either way.
#25
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,829 Times
in
1,995 Posts
“Carburetors man, that’s what life is all about”
lyric by Paul Williams as heard in the Phantom of the Paradise movie.
the song: Upholstery
when I saw the image, just came to mind.
riding is good.
lyric by Paul Williams as heard in the Phantom of the Paradise movie.
the song: Upholstery
when I saw the image, just came to mind.
riding is good.