GT Windstream help with crankset
11-20-23, 10:10 PM
#1
Newbie
Thread Starter
Join Date: Nov 2023
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
GT Windstream help with crankset
i am restoring a GT windstream. It needs a new front sprocket as i destroyed the original one trying to replace it with a vintage one i purchased. The problem is that the vintage front sprocket does not have the same chain spacing as the rear 7 speed shimano freewheel cog. What do I do now?
How can i find a front sprocket that will fit? I am thinking around 42 or 44 teeth?
How can i find a front sprocket that will fit? I am thinking around 42 or 44 teeth?
11-21-23, 03:20 PM
#2
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,528
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4357 Post(s)
Liked 3,996 Times
in
2,667 Posts
You need to figure out your BCD (Bolt Circle Diameter) and then order a chainring in that BCD an 7-9 speed should work fine your local bike shop can help with all of this as they probably have the tool and the know how. However keep in mind the Windstream is a very low initial cost bike and is not really a great candidate for putting a lot of money into. They were under $300 new and don't hold much value used.
