Crank length rule of thumb? (Toe?)
#51
Insane Bicycle Mechanic
Join Date: Mar 2008
Location: other Vancouver
Posts: 9,860
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 811 Post(s)
Liked 728 Times
in
388 Posts
There’s a fair amount of experimentation with short cranks (140mm to 160mm) in the recumbent bike and trike community. Mostly this is done to facilitate faster spin and lower stress on old, creaky knees.
__________________
Jeff Wills
Comcast nuked my web page. It will return soon..
Jeff Wills
Comcast nuked my web page. It will return soon..
#52
Senior Member
Join Date: Jun 2021
Posts: 1,697
Bikes: '38 Schwinn New World, ’69 Peugeot PX-10, '72 Peugeot PX-10, ‘7? Valgan, '78 Raleigh Comp GS, ’79 Holdsworth Pro, ’80 Peugeot TH-8 tandem, '87 Trek 400T, ‘7? Raleigh Sports, ‘7? Raleigh Superbe, ‘6? Hercules
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 765 Post(s)
Liked 1,601 Times
in
766 Posts
I recently put 175s on my PX-10 just for the heck of it, and not really expecting that I'd notice a difference from the 170s, but..... I really do notice the diff, and I like it. My comfort-zone cadence is pretty high, and that's probably come down a bit which is fine, but it's on hill climbs that I really notice the longer cranks- it just feels easier. And now I'm all, I've got to put 175s on all my bikes! I really want to try 175s on my Holdsworth Pro, but the toe overlap on that bike is already kind of extreme, so it might not be the wisest more....
[edit] data point to add- I was just a bit over 6', now I'm a bit under 6', ground down by the weight of years; 36.5" inseam.
[edit] data point to add- I was just a bit over 6', now I'm a bit under 6', ground down by the weight of years; 36.5" inseam.
Last edited by ehcoplex; 04-11-24 at 05:07 AM.
Likes For ehcoplex:
#53
Insane Bicycle Mechanic
Join Date: Mar 2008
Location: other Vancouver
Posts: 9,860
Mentioned: 34 Post(s)
Tagged: 0 Thread(s)
Quoted: 811 Post(s)
Liked 728 Times
in
388 Posts
https://www.davincitandems.com/components/
Origin8:
https://www.amazon.com/Origin8-Tripl...df_B002I7MAKG/
Zinn:
https://www.bigandtallbike.com/zinn-...per-style.html
__________________
Jeff Wills
Comcast nuked my web page. It will return soon..
Jeff Wills
Comcast nuked my web page. It will return soon..
#54
Senior Member
Join Date: Apr 2011
Posts: 7,182
Mentioned: 43 Post(s)
Tagged: 0 Thread(s)
Quoted: 4475 Post(s)
Liked 1,620 Times
in
1,064 Posts
“Different” in that a 10mm longer crank puts the pedal 10mm closer to the ground. The common 2.5mm (or 2%) increment is almost irrelevant when people vary 20% in height.
There’s a fair amount of experimentation with short cranks (140mm to 160mm) in the recumbent bike and trike community. Mostly this is done to facilitate faster spin and lower stress on old, creaky knees.
There’s a fair amount of experimentation with short cranks (140mm to 160mm) in the recumbent bike and trike community. Mostly this is done to facilitate faster spin and lower stress on old, creaky knees.
And then there's the fact that pedals have increased cornering clearance since the late '80s, so cornering with 180s now is like riding Campy quill pedals in the early '80s.
Just to put some numbers to this, my hypothetical bicycle has pedal clearance to 29.7 degrees with 170 cranks. Cornering drops by 2.5 degrees to 27.2 with 180s. That's the same amount if you use pedals that are 2cm longer. I don't think 2.5 degrees is significant compared to what people believe they are getting out of more suitable crank lengths.
And then if you have gotten on board with big tires, your 35c tires make up for 180 cranks compared to 25c.
Likes For Kontact:
#55
Senior Member
Join Date: Nov 2005
Location: NW Ohio
Posts: 3,442
Bikes: 1984 Miyata 310, 1986 Schwinn Sierra, 2011 Jamis Quest, 1980 Peugeot TH8 Tandem, 1992 Performance Parabola, 1987 Ross Mt. Hood, 1988 Schwinn LeTour, 1988 Trek 400T, 1981 Fuji S12-S LTD, 197? FW Evans
Mentioned: 24 Post(s)
Tagged: 0 Thread(s)
Quoted: 540 Post(s)
Liked 1,033 Times
in
529 Posts
Most of my bikes have 170 mm cranks, a couple have 175, and one is 172.5. My inseam is 32 inches and my normal cadence is around 80 rpm. Whatever length is on the bike I start off with is what feels like the ideal length. If I jump between a 170 and a 175, I can feel the difference for a few miles, then my legs adapt and forget about it. I'm sure there might be some scientific testing that could determine if one length is better, but for my riding, I can use them all. Last year I was looking for a crankset at the bike swap and passed up a bunch of nice 165mm cranks because I thought they were too short. Several were only $10, so I probably should have bought one to try out. Memory Lane and Ann Arbor are only a month away, so I'll add that to my shopping list.
#57
Crawlin' up, flyin' down
Join Date: Jan 2006
Location: Democratic Peoples' Republic of Berkeley
Posts: 5,681
Bikes: 1967 Paramount; 1982-ish Ron Cooper; 1978 Eisentraut "A"; two mid-1960s Cinelli Speciale Corsas; and others in various stages of non-rideability.
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 1038 Post(s)
Liked 2,558 Times
in
1,069 Posts
For your size, 170s would likely have been spec'd for as long as I can remember. 175s might feel just fine to you, or they may not. There is only one way to find out - try 'em, being sure to adjust your saddle height accordingly. If they feel wrong to you, or (especially) if your knees start hurting, then go back to 170s and move the 175s along to someone else. For comparison, you know how big I am. I ride 175s on most bikes, including the bike you saw me on at Cino last year. However, I do have 180s on the bike you saw me on at Eroica last year. When I ride the 180s, I feel the difference for about two minutes - after that, it's just riding.
As for scraping pedals, I would think that the vast majority of us are long past the days when we are cornering so aggressively that pedal strikes are an issue.
__________________
"I'm in shape -- round is a shape." Andy Rooney
"I'm in shape -- round is a shape." Andy Rooney
Likes For bikingshearer:
#58
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,721
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1957 Post(s)
Liked 2,034 Times
in
1,120 Posts
For years, I had 175s on my go fast bike with a complete Dura Ace 7700 group. I attended a training with Rahsaan Bahati who is taller than me but leg length is the same. I asked him what crank length he uses and he informed me that he uses 172.5 because his coach told him to change from 175. After that training I picked up a 172.5 7700 crankset. My rule of thumb states that if it's good for Rahsaan it can't hold me back.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
#60
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,522
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7359 Post(s)
Liked 2,497 Times
in
1,449 Posts
I just stumbled upon this video. It's about crank lengths for MTBs. There's an innovative crank that offers a huge number of lengths, all so that you can determine which length you like.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#61
Senior Member
Join Date: Apr 2011
Posts: 7,182
Mentioned: 43 Post(s)
Tagged: 0 Thread(s)
Quoted: 4475 Post(s)
Liked 1,620 Times
in
1,064 Posts
Long cranks, short cranks. Take the average of all the trends = 170mm.
#62
Senior Member
Agree that pedal strikes are something I’ll never worry about again. Now fender strikes are another story. Put some 175s on a fendered bike that I had been riding with 170s. Balancing at a light, I swung the wheel. The slightly longer cranks meant my foot brushed the fender and down I went. Kept the 175s but made sure the new fender was set Up a little closer to the tire.
#63
Junior Member
Lots of used copies of RRT are available:
https://www.amazon.com/Road-Racing-T...s%2C145&sr=8-1
RRT has an extensive discussion of crank length (pages 74-77). Also mentioned in the discussion is that a lot of top pro riders used long cranks BITD without ill effects.
Per the book:
Standard (traditional) crank length: Inseam of 74-80cm = 170mm; 81-86cm = 172.5mm; 87-93cm = 175mm.
Daring, new solutions crank length: Inseam 74-77cm = 170mm; 78-81cm = 172.5mm; 82-85cm = 175mm; 86-89cm = 177.5cm; 90-93cm = 180mm.
#64
Senior Member
Join Date: Apr 2016
Posts: 1,299
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 523 Post(s)
Liked 463 Times
in
355 Posts
I had some 152 mm, 4 x 110 bcd from Amazon a couple of weeks ago, seem reasonable quality if not the lightest. Stronglight Impact single or double, 5 x 110 bcd comes in 130, 145, 150, 155, 160, 165, 170, 175 mm.
#65
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,449
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2520 Post(s)
Liked 3,003 Times
in
1,707 Posts
Bernard Hinault's book 'Cyclisme sur Route/Spourt pour tout' was published in 1986. It's English translation 'Road Racing Technique and Training' was published in 1988. RRT is well worth having, for lots of insight on various aspects of fitting.
Lots of used copies of RRT are available:
https://www.amazon.com/Road-Racing-T...s%2C145&sr=8-1
RRT has an extensive discussion of crank length (pages 74-77). Also mentioned in the discussion is that a lot of top pro riders used long cranks BITD without ill effects.
Per the book:
Standard (traditional) crank length: Inseam of 74-80cm = 170mm; 81-86cm = 172.5mm; 87-93cm = 175mm.
Daring, new solutions crank length: Inseam 74-77cm = 170mm; 78-81cm = 172.5mm; 82-85cm = 175mm; 86-89cm = 177.5cm; 90-93cm = 180mm.
Lots of used copies of RRT are available:
https://www.amazon.com/Road-Racing-T...s%2C145&sr=8-1
RRT has an extensive discussion of crank length (pages 74-77). Also mentioned in the discussion is that a lot of top pro riders used long cranks BITD without ill effects.
Per the book:
Standard (traditional) crank length: Inseam of 74-80cm = 170mm; 81-86cm = 172.5mm; 87-93cm = 175mm.
Daring, new solutions crank length: Inseam 74-77cm = 170mm; 78-81cm = 172.5mm; 82-85cm = 175mm; 86-89cm = 177.5cm; 90-93cm = 180mm.
"In 1980, he was forced to abandon the Tour because of a bad knee and was forced to miss the Tour in 1983 because of a knee operation."
#66
Mad bike riding scientist
Join Date: Nov 2004
Location: Denver, CO
Posts: 27,403
Bikes: Some silver ones, a red one, a black and orange one, and a few titanium ones
Mentioned: 152 Post(s)
Tagged: 1 Thread(s)
Quoted: 6239 Post(s)
Liked 4,248 Times
in
2,382 Posts
The other problem for me, personally, is the lack of triples. I’m large and strong and won’t ride without a 22 tooth inner mated to a 34 or 36 (or even 40) tooth cog on the back. I’m not going to ask my 5’ tall wife to ride something that is geared far higher than my bikes. And before the suggestion is made to get a modern bike with something like a 11-52, small bikes that are capable of using that technology are difficult to find in small enough frames. For example the Specialized Diverge Expert E5 EVO comes with a 11-50 cassette and a 38 tooth chainring. That makes for a 21” gear, which is almost respectable. That’s for $2600.
The Specialized Sirrus 2.0 comes with a 11-32 cassette with a 46/30 crank and an 11-32 cassette. That’s a bit taller low of 26” which isn’t all that great but the Sirrus sells for $650 which makes it a better platform for making changes.
The other problem is that the smallest size th Diverge comes in has a standover of 732mm. The Sirrus comes in an XXS with a standover of 692mm. That an extra 40mm (1.5”) of clearance for someone who is short. The Diverge is just too big for an extremely small rider. The standover height of Sirrus can be reduced further by changing the wheels to 26” which isn’t a problem if shorter cranks are used.
The $1800 difference in the bikes means that you can spend money on making the Sirrus into a better bike for a short rider…including having someone like Wheel Smith make short triple cranks for it.
__________________
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
Stuart Black
Plan Epsilon Around Lake Michigan in the era of Covid
Old School…When It Wasn’t Ancient bikepacking
Gold Fever Three days of dirt in Colorado
Pokin' around the Poconos A cold ride around Lake Erie
Dinosaurs in Colorado A mountain bike guide to the Purgatory Canyon dinosaur trackway
Solo Without Pie. The search for pie in the Midwest.
Picking the Scablands. Washington and Oregon, 2005. Pie and spiders on the Columbia River!
#67
Senior Member
Join Date: Apr 2016
Posts: 1,299
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 523 Post(s)
Liked 463 Times
in
355 Posts
The 110 BCD is a dumb chainring to use in either a double or single, especially for a short armed crank. Short cranks are meant small people who have less muscle mass than larger people. The 110 BCD is limited to 34 tooth size. That’s kind of a high gear for a small person.
The other problem for me, personally, is the lack of triples. I’m large and strong and won’t ride without a 22 tooth inner mated to a 34 or 36 (or even 40) tooth cog on the back. I’m not going to ask my 5’ tall wife to ride something that is geared far higher than my bikes. And before the suggestion is made to get a modern bike with something like a 11-52, small bikes that are capable of using that technology are difficult to find in small enough frames. For example the Specialized Diverge Expert E5 EVO comes with a 11-50 cassette and a 38 tooth chainring. That makes for a 21” gear, which is almost respectable. That’s for $2600.
The Specialized Sirrus 2.0 comes with a 11-32 cassette with a 46/30 crank and an 11-32 cassette. That’s a bit taller low of 26” which isn’t all that great but the Sirrus sells for $650 which makes it a better platform for making changes.
The other problem is that the smallest size th Diverge comes in has a standover of 732mm. The Sirrus comes in an XXS with a standover of 692mm. That an extra 40mm (1.5”) of clearance for someone who is short. The Diverge is just too big for an extremely small rider. The standover height of Sirrus can be reduced further by changing the wheels to 26” which isn’t a problem if shorter cranks are used.
The $1800 difference in the bikes means that you can spend money on making the Sirrus into a better bike for a short rider…including having someone like Wheel Smith make short triple cranks for it.
The other problem for me, personally, is the lack of triples. I’m large and strong and won’t ride without a 22 tooth inner mated to a 34 or 36 (or even 40) tooth cog on the back. I’m not going to ask my 5’ tall wife to ride something that is geared far higher than my bikes. And before the suggestion is made to get a modern bike with something like a 11-52, small bikes that are capable of using that technology are difficult to find in small enough frames. For example the Specialized Diverge Expert E5 EVO comes with a 11-50 cassette and a 38 tooth chainring. That makes for a 21” gear, which is almost respectable. That’s for $2600.
The Specialized Sirrus 2.0 comes with a 11-32 cassette with a 46/30 crank and an 11-32 cassette. That’s a bit taller low of 26” which isn’t all that great but the Sirrus sells for $650 which makes it a better platform for making changes.
The other problem is that the smallest size th Diverge comes in has a standover of 732mm. The Sirrus comes in an XXS with a standover of 692mm. That an extra 40mm (1.5”) of clearance for someone who is short. The Diverge is just too big for an extremely small rider. The standover height of Sirrus can be reduced further by changing the wheels to 26” which isn’t a problem if shorter cranks are used.
The $1800 difference in the bikes means that you can spend money on making the Sirrus into a better bike for a short rider…including having someone like Wheel Smith make short triple cranks for it.
* I'm thinking custom chainring with mounting tabs for the granny, can you weld Zicral I wonder? ... apparently not, it's 7075 and subject to microcracking unless you use voodoo.
#68
Senior Member
Join Date: Jun 2018
Location: SW Ohio
Posts: 2,402
Mentioned: 93 Post(s)
Tagged: 0 Thread(s)
Quoted: 1105 Post(s)
Liked 1,827 Times
in
879 Posts
That had more to do with the massive gears pros turned in those days with nothing lower than a 42x19 or 21, even in the mountains. Not crank length.
__________________
#69
Senior Member
Join Date: Jan 2005
Location: Baltimore, MD
Posts: 5,449
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 2520 Post(s)
Liked 3,003 Times
in
1,707 Posts
I know of no pros other than Hinault in that era who skipped races because of a knee operation, let alone two performed a few years apart. (There almost certainly were some, though - just none with the prominence of Hinault in either the general or cycling-specific press.)
You're right that those knee problems might have had nothing to do with his crank arm choices, of course. They could easily have resulted from crash damage to his knees.
And, of course, from the Badger's determined nature. Quoting from memory from a book on the 1980 Giro and Tour: "Hinault gloried in his ability to tolerate pain." Great for winning races. Not so great for avoiding season-ending injuries.
Likes For Trakhak:
#70
Palmer
Join Date: Mar 2007
Location: Parts Unknown
Posts: 8,638
Bikes: Mike Melton custom, Alex Moulton AM, Dahon Curl
Mentioned: 37 Post(s)
Tagged: 0 Thread(s)
Quoted: 1677 Post(s)
Liked 1,839 Times
in
1,068 Posts