Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

8 speed upgrade

Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

8 speed upgrade

Old 05-16-19, 11:42 AM
  #1  
frogbiscuit
Senior Member
Thread Starter
 
Join Date: Aug 2008
Location: Spotsylvania, VA
Posts: 64

Bikes: 2018 Specialized Sirrus, 2004 Gary Fisher Marlin, 90's Diamond Back Extreme TG, Schwinn Mesa Runner with an 88cc 2 stroke engine

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 37 Post(s)
Liked 7 Times in 5 Posts
8 speed upgrade

I had to do a little tweaking on my Specialized Sirrus rear derailleur and the 8 speed Shimano Altus seems a little cheesy. Not 100% familiar with the Shimano hierarchy, what would be considered an upgrade for an 8 speed rear? I would like to stay Shimano so all I would have to do is change the rear derailleur.
frogbiscuit is offline  
Old 05-16-19, 11:54 AM
  #2  
Eric S. 
Senior Member
 
Eric S.'s Avatar
 
Join Date: Aug 2005
Location: Las Vegas, NV
Posts: 814

Bikes: '04 LeMond Buenos Aires, '82 Bianchi Nuova Racing, De Rosa SLX, Bridgestone MB-1, Guerciotti TSX, Torpado Aelle, LeMond Tourmalet 853, Bridgestone Radac

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 58 Post(s)
Liked 8 Times in 7 Posts
A Shimano Sora derailleur would work fine and looks as good as many others higher up Shimano's line. I just checked eBay and you can get a new one for about $25.
Eric S. is offline  
Old 05-16-19, 12:00 PM
  #3  
Iride01
Senior Member
 
Iride01's Avatar
 
Join Date: Jul 2017
Location: Mississippi
Posts: 2,329

Bikes: '91 Schwinn Paramount '78 Raleigh Competition GS

Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 865 Post(s)
Liked 28 Times in 25 Posts
Why do you think it cheesy? Altus is fine for an 8 speed. I suppose you could move up to a more expensive line of Shimano, but realize the higher you go in the line, probably the more speeds they were intended for.

I assume this is for a mountain bike. So it's a little out of what I'm used to, but if you do go for an different model or newer model of the same then be certain the pull ratio's for the DR aren't different. Usually not, but I think at some time on the road bike DR's shimano changed the amount of cable pull needed to traverse the cassette stack. They may have done similar with the mtn bike line. So a newer or different model DR might require a different shifter too.

Shimano's line up of components is here...................... https://bike.shimano.com/en-US/components/mtb.html
Iride01 is offline  
Old 05-16-19, 12:02 PM
  #4  
Bill Kapaun
Senior Member
 
Bill Kapaun's Avatar
 
Join Date: Feb 2007
Location: Mid Willamette Valley, Orygun
Posts: 10,800

Bikes: 86 RockHopper,2008 Specialized Globe. Both upgraded to 9 speeds.

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 661 Post(s)
Liked 26 Times in 22 Posts
Altus shifts my 9 speed just fine.
Bill Kapaun is offline  
Old 05-16-19, 12:07 PM
  #5  
Lemond1985
Sophomore Member
 
Lemond1985's Avatar
 
Join Date: Jan 2019
Posts: 1,427
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 794 Post(s)
Liked 150 Times in 108 Posts
I just replaced a bent 8 speed RSX RD with an Altus one a couple weeks ago. The Altus shifts great, takes a 34t cassette and was only $20. My only gripe is it's a little heavy, but for $20, I won't complain.

Lemond1985 is offline  
Likes For Lemond1985:
Old 05-16-19, 12:23 PM
  #6  
frogbiscuit
Senior Member
Thread Starter
 
Join Date: Aug 2008
Location: Spotsylvania, VA
Posts: 64

Bikes: 2018 Specialized Sirrus, 2004 Gary Fisher Marlin, 90's Diamond Back Extreme TG, Schwinn Mesa Runner with an 88cc 2 stroke engine

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 37 Post(s)
Liked 7 Times in 5 Posts
Originally Posted by Lemond1985 View Post
I just replaced a bent 8 speed RSX RD with an Altus one a couple weeks ago. The Altus shifts great, takes a 34t cassette and was only $20. My only gripe is it's a little heavy, but for $20, I won't complain.

See my Altus doesn't look like that. It's black and mostly plastic. Are there different grades of Altus? I am just wondering if maybe I bent it in the fall, I should replace it? It seems to work fine, but took a bit of a beating.
frogbiscuit is offline  
Old 05-16-19, 12:33 PM
  #7  
Iride01
Senior Member
 
Iride01's Avatar
 
Join Date: Jul 2017
Location: Mississippi
Posts: 2,329

Bikes: '91 Schwinn Paramount '78 Raleigh Competition GS

Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 865 Post(s)
Liked 28 Times in 25 Posts
I don't know that there are different grades, but Altus is just a name of the product line/tier level. So the design periodically changes over the years. Someone else once described it like car models..... Same name, but different every year.

Thankfully bike parts are a little slower to change.

And if things are working fine. Don't be in such a hurry to spend money. Save for another bike.
Iride01 is offline  
Old 05-16-19, 01:40 PM
  #8  
fietsbob 
coprolite
 
fietsbob's Avatar
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 41,625

Bikes: 8

Mentioned: 188 Post(s)
Tagged: 0 Thread(s)
Quoted: 6838 Post(s)
Likes: 0
Liked 217 Times in 180 Posts
Those Big Bottom Pulleys Do a good slack take up without such a long cage ..
fietsbob is offline  
Old 05-16-19, 01:50 PM
  #9  
Lemond1985
Sophomore Member
 
Lemond1985's Avatar
 
Join Date: Jan 2019
Posts: 1,427
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 794 Post(s)
Liked 150 Times in 108 Posts
Yes, I agree, they do. Plus it has nice strong springs, so you don't end up with a weak RD with worn out springs that refuses to drop into the smallest cog.
Lemond1985 is offline  
Old 05-16-19, 04:58 PM
  #10  
HerrKaLeun
Senior Member
 
Join Date: Mar 2017
Location: Madison, WI
Posts: 1,379

Bikes: Giant Toughroad SLR1 and Motobecane Sturgis NX

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 667 Post(s)
Likes: 0
Liked 25 Times in 21 Posts
Unless the RD is worn out or not adjusted properly, all shifting quality is a function of the shifter.

Also check hanger alignment.
HerrKaLeun is online now  
Likes For HerrKaLeun:
Old 05-16-19, 06:01 PM
  #11  
Kapusta
Cyclochondriac
 
Join Date: Feb 2017
Posts: 2,164
Mentioned: 18 Post(s)
Tagged: 0 Thread(s)
Quoted: 907 Post(s)
Likes: 0
Liked 50 Times in 39 Posts
Any Shimano 7, 8, or 9 speed RD will work with your shifters and an 8 speed cassette.

Whether you need a mountain or road RD depends on the largest cog you are running, but I assume that since there is an Altus on there now that you need a mountain derailleur.

That said, unless your RD is worn out or broken, upgrading it is one if the least useful ways to spend money on your bike.
Kapusta is online now  
Likes For Kapusta:
Old 05-16-19, 06:06 PM
  #12  
Lemond1985
Sophomore Member
 
Lemond1985's Avatar
 
Join Date: Jan 2019
Posts: 1,427
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 794 Post(s)
Liked 150 Times in 108 Posts
Or bent like mine was.
Lemond1985 is offline  
Old 05-16-19, 06:51 PM
  #13  
Bill Kapaun
Senior Member
 
Bill Kapaun's Avatar
 
Join Date: Feb 2007
Location: Mid Willamette Valley, Orygun
Posts: 10,800

Bikes: 86 RockHopper,2008 Specialized Globe. Both upgraded to 9 speeds.

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 661 Post(s)
Liked 26 Times in 22 Posts
Originally Posted by frogbiscuit View Post
....It seems to work fine, but took a bit of a beating.
If it ain't broke....
Bill Kapaun is offline  
Likes For Bill Kapaun:
Old 05-17-19, 06:57 AM
  #14  
frogbiscuit
Senior Member
Thread Starter
 
Join Date: Aug 2008
Location: Spotsylvania, VA
Posts: 64

Bikes: 2018 Specialized Sirrus, 2004 Gary Fisher Marlin, 90's Diamond Back Extreme TG, Schwinn Mesa Runner with an 88cc 2 stroke engine

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 37 Post(s)
Liked 7 Times in 5 Posts
Originally Posted by Lemond1985 View Post
Or bent like mine was.
Yeah, the hanger was bent and so was the cage that holds the pulley. Did a couple of 15 milers, after some adjustment, seems to work fine. Just wondering what would be an upgrade, if there is one.
frogbiscuit is offline  
Old 05-17-19, 07:07 AM
  #15  
Wilfred Laurier
Señor Member
 
Wilfred Laurier's Avatar
 
Join Date: Feb 2013
Posts: 4,281
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 327 Post(s)
Liked 64 Times in 45 Posts
I believe the hierarchy in MTB and hybrid components is:

Altus -> Acera -> Alivio -> Deore -> SLX -> XT

In my experience, when new, the cheaper stuff works 99% as good as the more expensive stuff. I don't know if all the groups use the same 'pull ratios' - an SLX derailleur might not index properly with the shifters that originally came on your bike.
Wilfred Laurier is offline  
Old 05-17-19, 07:26 AM
  #16  
robert schlatte
Senior Member
 
robert schlatte's Avatar
 
Join Date: Dec 2007
Location: columbus, ohio
Posts: 886

Bikes: Soma Saga, 1980 Schwinn Voyageur 11.8, New Albion Privateer

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 76 Post(s)
Likes: 0
Liked 5 Times in 3 Posts
I needed a new derailleur on old foul weather beater bike. I bought a Shimano Tourney (lower in the hierarchy than Altus) for $12 on Amazon. It works flawlessly. It is a little ugly and heavy but I could care less. You could go up a grade or two and be very happy but maybe not necessary? Is there a bike co-op in your area. I have found beautiful used parts for next to nothing at my local co-op.
robert schlatte is offline  
Old 05-17-19, 07:33 AM
  #17  
Lemond1985
Sophomore Member
 
Lemond1985's Avatar
 
Join Date: Jan 2019
Posts: 1,427
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 794 Post(s)
Liked 150 Times in 108 Posts
Co-op idea seconded. I like experimenting with different-sized stems, and the co-op sells them for like 5-10 bucks. Forks, seats, and pedals I've gotten there. One good thing you can really save big on at co-ops is crankset chainrings, for trying out different gear ratios. Those cost a fortune new. Also, used cassettes are cheap.
Lemond1985 is offline  
Old 05-17-19, 07:46 AM
  #18  
bakerjw
Senior Member
 
Join Date: Sep 2008
Location: NE Tennessee
Posts: 784

Bikes: Giant TCR/Surly Karate Monkey/Foundry FireTower/Curtlo Tandem

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 128 Post(s)
Liked 49 Times in 37 Posts
FWIW, our road tandem came with Claris shifters and a 3x8 drivetrain. I swapped out the front and rear derailleurs with 105's and it worked quite well.
IIRC, 8 and 10 speed chains are the same inner width, it is the outer width that changes.
I have since upgraded the shifters to 105s and it shifts even better now.
bakerjw is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
armstrong101
Classic & Vintage
26
09-03-15 08:58 PM
JoelS
Northern California
5
05-29-10 05:45 PM
RobbieTunes
Classic & Vintage
7
09-19-09 11:37 AM
svbiker
"The 33"-Road Bike Racing
10
12-29-07 11:57 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.