Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Can't find barrel adjuster

Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Can't find barrel adjuster

Old 06-16-19, 06:05 AM
  #1  
bmca620
Newbie
Thread Starter
 
Join Date: Jun 2019
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times in 0 Posts
Can't find barrel adjuster

I have a Specialized Diverge A1 with a Shimano Claris and I'm having trouble figuring out where the barrel adjuster for the front or rear derailleur is.

I can see two likely places it could be but I can't turn either to adjust.

I wanted to attach some pictures showing where I think the barrel adjuster for the rear derailleur could be but I'm not allowed to yet. One is on the rear derailleur itself and the other is under the down tube.

Could anyone point out to me where I'm going wrong? Is there some way I need to turn them? Am I looking in the wrong places?

Thanks
bmca620 is offline  
Old 06-16-19, 06:19 AM
  #2  
ChinookTx
Senior Member
 
Join Date: Mar 2015
Location: Gatineau, Quebec
Posts: 247

Bikes: Kona Rove Ti., Motobecane Whipshot Ti

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 86 Post(s)
Liked 39 Times in 31 Posts
The one on the rear derailleur is right where the cable enters the derailleur. Out front, there usually is none at the derailleur. It can be an inline adjuster (somewhere along the cable) or on the cable boss on the downtube.

ChinookTx is offline  
Old 06-16-19, 06:23 AM
  #3  
andrewclaus
Senior Member
 
Join Date: Feb 2012
Location: Golden, CO, Scottsdale, AZ
Posts: 1,517

Bikes: 2016 Fuji Tread, 1983 Trek 620

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 217 Post(s)
Likes: 0
Liked 15 Times in 13 Posts
First, only try adjusting with a slack cable. On the rear, shift into your lowest gear, quit pedaling, then shift into your highest gear. This will give you maximum slack. On the front, it's opposite.

Often an adjuster will seize onto the housing end. When the cable is slack, try pulling the housing out of the adjuster and be sure this isn't happening.

Then try loosening the adjuster. It should be able to thread all the way out. Inspect the threads for corrosion and damage and repair as needed.
andrewclaus is offline  
Old 06-16-19, 09:23 AM
  #4  
dsbrantjr
Senior Member
 
dsbrantjr's Avatar
 
Join Date: Sep 2010
Location: Roswell, GA
Posts: 6,225

Bikes: '93 Trek 750, '92 Schwinn Crisscross, '93 Mongoose Alta

Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 649 Post(s)
Likes: 0
Liked 44 Times in 41 Posts
It will be easier to adjust and less likely to strip/bind if you relieve the cable tension before making the adjustments. Same with derailleur limit screws; don't try to drive the screw against the spring, pull the der away from the screw, then turn it.
dsbrantjr is online now  
Old 06-16-19, 01:49 PM
  #5  
fietsbob 
coprolite
 
fietsbob's Avatar
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 41,928

Bikes: 8

Mentioned: 188 Post(s)
Tagged: 0 Thread(s)
Quoted: 6832 Post(s)
Likes: 0
Liked 211 Times in 176 Posts
functionally, on the repair stand, the back location lets me see what the adjustment changes..
fietsbob is offline  
Old 06-17-19, 07:35 AM
  #6  
easyupbug 
Senior Member
 
Join Date: Jan 2013
Posts: 1,143

Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese

Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 149 Post(s)
Likes: 0
Liked 5 Times in 5 Posts
Welcome. If you google "bicycle part names" you will see lots of diagrams showing part names which can vary by manufacturer or source. The top tube adjuster might on some diagrams be identified as a "housing stop". Also searching for "derailleur adjustment" will find lots of help showing you how and why to turn the adjuster. The Park Tool website and Park Tool videos on You Tube would be good starting points.
easyupbug is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.