Go Back  Bike Forums > The Racer's Forum > Cyclocross Racing
Reload this Page >

Can't get outta my Beaters

Cyclocross Racing Discuss pro racing, the big races, and even the small backyard races. Don't forget to update all the members with your own race results.

Can't get outta my Beaters

Old 11-05-18, 04:44 PM
  #1  
JeffOYB
Senior Member
Thread Starter
 
JeffOYB's Avatar
 
Join Date: Dec 2006
Location: Williamston, MI "Wee-um-stun"
Posts: 617

Bikes: Uh... road, mtb, tour, CX (kludged), 3spd, 'bent, tandem, folder (the fam has another, what, 8)

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 86 Post(s)
Liked 1 Time in 1 Post
Can't get outta my Beaters

When I go to dismount my shoe stays connected until the heel is twisted WAY out.

I'm new to Beaters. At first the shoes were coming out easier than I could imagine. Going in easy, too. I wouldn't feel either change yet the pedal was grabbing. But now it's not letting go. I'm close to crashing sometimes now. Especially especially when coming in slow to just get off my bike.

Also i'm finding it sketchy to get into the things -- they're a small target. I don't look down or anything but they're just small.

I'm curious about what'll happen if I ever want to coast in on my instep...
JeffOYB is offline  
Old 11-12-18, 02:46 PM
  #2  
cmh
Senior Member
 
Join Date: Jul 2005
Location: Portland, OR
Posts: 2,623
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 36 Post(s)
Liked 34 Times in 12 Posts
When I had trouble unclipping from pedals it was because my cleat was loose. So, as I turned my shoe, the cleat stayed with the pedal until my heel was way out. You might check that. If your cleats are fine, try a little chain lube on the springs and mech in the pedal maybe they are seized up with dust and dirt. I don't like egg beaters either, btw. I feel much more stable on SPDs, but many like egg beaters so it may be a matter of getting used to them.
cmh is offline  
Old 11-12-18, 03:00 PM
  #3  
fietsbob 
coprolite
 
fietsbob's Avatar
 
Join Date: Jun 2010
Location: NW,Oregon Coast
Posts: 41,632

Bikes: 8

Mentioned: 188 Post(s)
Tagged: 0 Thread(s)
Quoted: 6838 Post(s)
Likes: 0
Liked 217 Times in 180 Posts
Yea, I 2nd, , It's Loose Cleat Screws...
fietsbob is offline  
Old 11-12-18, 04:23 PM
  #4  
JeffOYB
Senior Member
Thread Starter
 
JeffOYB's Avatar
 
Join Date: Dec 2006
Location: Williamston, MI "Wee-um-stun"
Posts: 617

Bikes: Uh... road, mtb, tour, CX (kludged), 3spd, 'bent, tandem, folder (the fam has another, what, 8)

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 86 Post(s)
Liked 1 Time in 1 Post
It was two things! Loose cleat. AND the cleats have sidedness! you have to look hard to see it. and also read the manual. one way has 20 deg outer release the other ways has 15 deg. i had it set to 20. now i'm tight and at 15 and good to go! (i also used locktite this time.)
JeffOYB is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
blaronn
Road Cycling
78
01-07-12 02:10 PM
dwarner1
Singlespeed & Fixed Gear
23
02-27-08 12:05 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.