Show us your builds
#352
Junior Member
Join Date: May 2010
Posts: 21
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#353
Newbie
Join Date: Jul 2015
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
My first Bamboo Cargo bike
#355
Newbie
Join Date: Jul 2016
Posts: 1
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Recently finished my custom touring frame.
Here's some pictures of the process.
Geometry:
3D Mock up:
Internal routing and mounts:
Frame kit:
After assembling:
Custom fender mounts:
Incoming feature (integrated battery):
Here's some pictures of the process.
Geometry:
3D Mock up:
Internal routing and mounts:
Frame kit:
After assembling:
Custom fender mounts:
Incoming feature (integrated battery):
#357
Junior Member
Join Date: Sep 2015
Posts: 13
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Here's my first recumbent build. And my second. It was about 2 decades back and I just got the frame and pics out to do the video. Muffler clamps for the first and it was fun until I moved on.
#359
Junior Member
Join Date: Sep 2015
Posts: 13
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 1 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I made a few suitcase bikes too. In order of build date:
This one was to take to Paraguay and I've used it for a decade down there whenever we go.
Here's my second that I used to take to Detroit on the Megabus.
Lrn Fzx: Detroit by Bicycle from the Megabus - Part 1
And the third I built for the train to VanCouver, BC. This is the one I'm gonna keep.
Lrn Fzx: Pedal Vancouver BC Part 1 - The Plan
This one was to take to Paraguay and I've used it for a decade down there whenever we go.
Here's my second that I used to take to Detroit on the Megabus.
Lrn Fzx: Detroit by Bicycle from the Megabus - Part 1
And the third I built for the train to VanCouver, BC. This is the one I'm gonna keep.
Lrn Fzx: Pedal Vancouver BC Part 1 - The Plan
#361
Junior Member
Join Date: Mar 2013
Location: Alberta, Canada
Posts: 195
Bikes: Best described as "What is that?!"
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 73 Post(s)
Likes: 0
Liked 10 Times
in
9 Posts
May I post a Work In Progress if said work is a miniature prototype built out of a construction set?
#362
Licensed Bike Geek
My first frameset build. Up until this point, I'd never even held a torch let alone actually used one but with the patient tutelage of Aaron McCambridge of AR Cycles I managed to construct a frame and fork without burning down his shop.
It was a terrific experience, a bucket-list item for me and tremendously satisfying to ride something that was made by my hands.
It was a terrific experience, a bucket-list item for me and tremendously satisfying to ride something that was made by my hands.
#366
Senior Member
Join Date: Aug 2012
Location: Kiev
Posts: 69
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 27 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Here is a recent frame I've made for a friend:
Personally, I don't like sloping down tubes. But that's what he wanted and somehow I think it works for this bike.
Personally, I don't like sloping down tubes. But that's what he wanted and somehow I think it works for this bike.
#368
Junior Member
Join Date: Mar 2017
Posts: 9
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Just for fun
I had an old mountain bike hanging in the garage that I thought I'd have a little fun with. I re-used all the wheels, brakes, head tube and few other miscellaneous parts and came up with this. I need to find a good seat, the traditional shaped seat makes you pull on the bars as you pedal, I'd like to find one with a bit of a bucket shape without going to the lawn chair shape you see on full recumbents. Any ideas welcome.
IMG_0122small.jpg
IMG_0122small.jpg
#371
Senior Member
Bought this bike at the nearby thrift store for $15 with the idea that I'd just use the tubing for a recycled bike project some day. But, the bike has grown on me. So, I decided to see if I could figure out what it was. It seems to be a Huffy Sea Pines, based on the rear triangle shape and dropouts. But, this frame is for sure brazed. I didn't know Huffy did that. It's not nice brazing, but it is certainly brass in the joints and not steel.
I think I'm going to modernize this one. Fillet the joints, add disk tabs., cable stops; maybe make it a 1x10 for riding around the neighborhood.
Bummer, I can't post pics anymore? I guess I need 3 more posts and then I'll put some pics in here...
I think I'm going to modernize this one. Fillet the joints, add disk tabs., cable stops; maybe make it a 1x10 for riding around the neighborhood.
Bummer, I can't post pics anymore? I guess I need 3 more posts and then I'll put some pics in here...
#372
Senior Member
Join Date: Apr 2015
Location: High Normandy, France
Posts: 58
Bikes: Raleigh Maverick '15, Dahon Speed D7 ~2007, and a lot :)
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 12 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
@ LrnFzx : wow, your suitcase bikes are pretty cools ! Are they rigid enough compared to a "not cut bike" ? Do you plan to make a folding bike one day ?
Here is my first build (and, eeeeh... my practice for welding )
My super cheap cargo bike (~100€, including all parts). Nice to ride, but a "little" tank with 32kg and 2,60m long. 90x60cm of "cargo" space, already tested with ~80kg of wood but I wouldn't put more than 70kg in use.
The donnor bike was an old supermarket MTB, steel tubes and profiles are recycling or from scrapyard, the box is made with palette wood (burned + linseed oil + walnut broth).
Welded with a MMA inverter, no jig (), a lot of grinder an files, about ~150 hours of work.
I'm already thinking about the next: a trike, that I'll modify as a velomobile. But this time with a jig an better welds.
Here is my first build (and, eeeeh... my practice for welding )
My super cheap cargo bike (~100€, including all parts). Nice to ride, but a "little" tank with 32kg and 2,60m long. 90x60cm of "cargo" space, already tested with ~80kg of wood but I wouldn't put more than 70kg in use.
The donnor bike was an old supermarket MTB, steel tubes and profiles are recycling or from scrapyard, the box is made with palette wood (burned + linseed oil + walnut broth).
Welded with a MMA inverter, no jig (), a lot of grinder an files, about ~150 hours of work.
I'm already thinking about the next: a trike, that I'll modify as a velomobile. But this time with a jig an better welds.
#373
Full Member
Join Date: Sep 2015
Location: Denver Colorado
Posts: 339
Bikes: 2020 Pivot Vault, 1983 Rossin Record, Garneau R1, Mesamods home built gravel/rain commuter bike, 1995 Barracuda A2V modified with Surley single speed dropouts, 1969 Bottecchia junkyard special fixed gear, Cervelo P4, Mesamods 650b klunker
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 96 Post(s)
Liked 72 Times
in
50 Posts
This is my second complete frame build. I built the fork on this bike as well. The bike is a 650b klunker type bike, single speed with rear disc brake only. I built the bike as a tribute to my first BMX bike - a 1975 Webco with Redline forks.
#374
Full Member
Join Date: Sep 2015
Location: Denver Colorado
Posts: 339
Bikes: 2020 Pivot Vault, 1983 Rossin Record, Garneau R1, Mesamods home built gravel/rain commuter bike, 1995 Barracuda A2V modified with Surley single speed dropouts, 1969 Bottecchia junkyard special fixed gear, Cervelo P4, Mesamods 650b klunker
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 96 Post(s)
Liked 72 Times
in
50 Posts
I also made a video series of the build....