Panaracer Gravel King, World's Most Sadistic Tire?
#1
Sophomore Member
Thread Starter
Join Date: Jan 2019
Posts: 2,531
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1628 Post(s)
Liked 1,059 Times
in
633 Posts
Panaracer Gravel King, World's Most Sadistic Tire?
Third day and third set of wheels trying to mount these SOB's. They're the regular folding clincher version. I pride myself on being able to mount almost any tire using only my hands, time, patience, and some baby powder, But I'm ready to throw in the towel with these.
I've laughed at many an Amazon review where someone said a given brand of tires were impossible to mount. I fought probably 5 minutes just getting the opposite side of the tire onto the rim. I can only think of one other set of tires in 50+ years of wrenching on bikes fitting so tightly, and that was because they were the wrong size (anyone remember Schwinn's proprietary tires for 20" rims?)
Sent away for some Kool Stop tire levers, as a last resort. But these tires are just simply too small for any 700c rim that I own. And I know that if and when I do get them to mount, it will be a hollow victory once I get my first flat, and have to go through the same thing a second time, most likely while on the road in rain, mud or cold. And I predict that first flat won't be long, given the laughably thin tread on these. They're just a file tread road tire, as far as I can see. I have no idea why they're marketed as a gravel tire, since the first goathead or piece of glass I even see is gonna cause a flat, I predict. They might work fine in some parts of the US, but not in CA or anyplace with goat heads, or in any sort of urban setting with glass and debris on the roadway.
Thank you Panaracer, I bow humbly to your extreme sadism, and I hate your tires with the passion of a thousand rising suns.
I've laughed at many an Amazon review where someone said a given brand of tires were impossible to mount. I fought probably 5 minutes just getting the opposite side of the tire onto the rim. I can only think of one other set of tires in 50+ years of wrenching on bikes fitting so tightly, and that was because they were the wrong size (anyone remember Schwinn's proprietary tires for 20" rims?)
Sent away for some Kool Stop tire levers, as a last resort. But these tires are just simply too small for any 700c rim that I own. And I know that if and when I do get them to mount, it will be a hollow victory once I get my first flat, and have to go through the same thing a second time, most likely while on the road in rain, mud or cold. And I predict that first flat won't be long, given the laughably thin tread on these. They're just a file tread road tire, as far as I can see. I have no idea why they're marketed as a gravel tire, since the first goathead or piece of glass I even see is gonna cause a flat, I predict. They might work fine in some parts of the US, but not in CA or anyplace with goat heads, or in any sort of urban setting with glass and debris on the roadway.
Thank you Panaracer, I bow humbly to your extreme sadism, and I hate your tires with the passion of a thousand rising suns.
#2
Sophomore Member
Thread Starter
Join Date: Jan 2019
Posts: 2,531
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1628 Post(s)
Liked 1,059 Times
in
633 Posts
These are 700 x 28's. They've got to be a defective batch, they feel more like 695 x 28's. And they don't appear very wide either, more like 25's than 28's.
I was hoping to get some stretch once they got mounted, maybe I could even over-inflate them a bit. But this just seems like a lost cause, on a tire I can already tell is not gonna suit my needs or hold up very well around my old nemesis, i.e., goat heads.
I was hoping to get some stretch once they got mounted, maybe I could even over-inflate them a bit. But this just seems like a lost cause, on a tire I can already tell is not gonna suit my needs or hold up very well around my old nemesis, i.e., goat heads.
#3
Senior Member
Because it has reinforced sidewalls.
In lots of places, the only things on roads that are likely to stab through tread rubber are things left by humans, and gravel roads see low traffic. The result being that a sub-tread puncture-protection layer is largely irrelevant to the gravel riding in these areas.
In lots of places, the only things on roads that are likely to stab through tread rubber are things left by humans, and gravel roads see low traffic. The result being that a sub-tread puncture-protection layer is largely irrelevant to the gravel riding in these areas.
#4
Sempiternal Newb
Join Date: Dec 2014
Location: Panama City, FL
Posts: 637
Bikes: '92 Trek 750, '85 Univega Gran Turismo, '95 Stumpjumper,
Mentioned: 49 Post(s)
Tagged: 0 Thread(s)
Quoted: 232 Post(s)
Likes: 0
Liked 15 Times
in
11 Posts
They absolutely require a Kool-Stop tire jack to install, in any size. I've tried a couple 32s in both SK and file tread as well as 43.
I'm a huge fan of the tires. Been on a set of 32s in a file tread for a year for commuting, gravel, and fast club rides. Only flatted once with a snakebite because I was playing around with low tire pressure. Once that was dialed, it's been smooth sailing.
I'm sure they won't handle goat heads, not much can I hear. It's probably worthwhile to run a tube with a removable core and add some Stan's sealant. Then you can have your supple ride with no headaches.
I'm a huge fan of the tires. Been on a set of 32s in a file tread for a year for commuting, gravel, and fast club rides. Only flatted once with a snakebite because I was playing around with low tire pressure. Once that was dialed, it's been smooth sailing.
I'm sure they won't handle goat heads, not much can I hear. It's probably worthwhile to run a tube with a removable core and add some Stan's sealant. Then you can have your supple ride with no headaches.
#5
Sophomore Member
Thread Starter
Join Date: Jan 2019
Posts: 2,531
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1628 Post(s)
Liked 1,059 Times
in
633 Posts
They absolutely require a Kool-Stop tire jack to install, in any size. I've tried a couple 32s in both SK and file tread as well as 43.
I'm a huge fan of the tires. Been on a set of 32s in a file tread for a year for commuting, gravel, and fast club rides. Only flatted once with a snakebite because I was playing around with low tire pressure. Once that was dialed, it's been smooth sailing.
I'm sure they won't handle goat heads, not much can I hear. It's probably worthwhile to run a tube with a removable core and add some Stan's sealant. Then you can have your supple ride with no headaches.
I'm a huge fan of the tires. Been on a set of 32s in a file tread for a year for commuting, gravel, and fast club rides. Only flatted once with a snakebite because I was playing around with low tire pressure. Once that was dialed, it's been smooth sailing.
I'm sure they won't handle goat heads, not much can I hear. It's probably worthwhile to run a tube with a removable core and add some Stan's sealant. Then you can have your supple ride with no headaches.
#6
Senior Member
Bigger picture... Any remount attempt later in the field under less than ideal conditions will be that much worse. Sure the tire may "stretch" a bit but if you are planning on going TL, the dried up layer around the bead will make it stickier and that much harder to handle.
#7
Sophomore Member
Thread Starter
Join Date: Jan 2019
Posts: 2,531
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1628 Post(s)
Liked 1,059 Times
in
633 Posts
The sidewall is regular, non-reinforced. Linked picture of cross-sectioned GK slick 700cx38 example shows sidewall between 0.6-0.7mm and lines up with the picture for Gravel King Slick and SK on Panaracers site. This thickness is about the same as a regular road tire, GP4KII shows the same thickness.
https://drandalls.files.wordpress.co...2/img_5722.jpg
That's where you're stuck? Should be no problem to pop on with Pedros tire levers. What rim tape or strip are you using, that looks like the kind of rim wrapped in Velox.
https://drandalls.files.wordpress.co...2/img_5722.jpg
That's where you're stuck? Should be no problem to pop on with Pedros tire levers. What rim tape or strip are you using, that looks like the kind of rim wrapped in Velox.
#8
Sophomore Member
Thread Starter
Join Date: Jan 2019
Posts: 2,531
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1628 Post(s)
Liked 1,059 Times
in
633 Posts
Bigger picture... Any remount attempt later in the field under less than ideal conditions will be that much worse. Sure the tire may "stretch" a bit but if you are planning on going TL, the dried up layer around the bead will make it stickier and that much harder to handle.
#9
Senior Member
It's not especially thick, but I think they're using a tougher outer fabric layer than on a normal road tire. That's what Panaracer's diagrams claim, and the cross-section photo you linked also shows the casing consisting of two layers of different material. The sidewalls of most road tires look homogeneous when viewed in cross-section.
#10
Senior Member
Does the rim have a central trough? If so, is the entire bead in that central trough before you try to mount the tire? Are these tubeless tires?
Also, it takes two to tango. Tight tires are often a tire/rim combination problem, not a tire rpoblem. For example, for me mounting Hutchinson tubeless road tires on Shimano WH-6800 was an unbelievable exercise in frustrations, ripped up hands and broken levers. I later mounted a similar set of tires to WTB rims without issue. Some rims (like Shimano) are notoriously oversized.
Also, it takes two to tango. Tight tires are often a tire/rim combination problem, not a tire rpoblem. For example, for me mounting Hutchinson tubeless road tires on Shimano WH-6800 was an unbelievable exercise in frustrations, ripped up hands and broken levers. I later mounted a similar set of tires to WTB rims without issue. Some rims (like Shimano) are notoriously oversized.
#11
Senior Member
Join Date: Jun 2014
Posts: 506
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 101 Post(s)
Liked 41 Times
in
33 Posts
#12
Senior Member
Join Date: Feb 2016
Location: SE Wisconsin
Posts: 1,851
Bikes: Lemond '01 Maillot Jaune, Lemond '02 Victoire, Lemond '03 Poprad, Lemond '03 Wayzata DB conv(Poprad), '79 AcerMex Windsor Carrera Professional(pur new), '88 GT Tequesta(pur new), '01 Bianchi Grizzly, 1993 Trek 970 DB conv, Trek 8900 DB conv
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 759 Post(s)
Likes: 0
Liked 810 Times
in
471 Posts
These are 700 x 28's. They've got to be a defective batch, they feel more like 695 x 28's. And they don't appear very wide either, more like 25's than 28's.
I was hoping to get some stretch once they got mounted, maybe I could even over-inflate them a bit. But this just seems like a lost cause, on a tire I can already tell is not gonna suit my needs or hold up very well around my old nemesis, i.e., goat heads.
I was hoping to get some stretch once they got mounted, maybe I could even over-inflate them a bit. But this just seems like a lost cause, on a tire I can already tell is not gonna suit my needs or hold up very well around my old nemesis, i.e., goat heads.
#13
FLIR Kitten to 0.05C
Join Date: Sep 2014
Location: Lincoln, Nebraska
Posts: 5,331
Bikes: Roadie: Seven Axiom Race Ti w/Chorus 11s. CX/Adventure: Carver Gravel Grinder w/ Di2
Mentioned: 30 Post(s)
Tagged: 0 Thread(s)
Quoted: 2349 Post(s)
Liked 406 Times
in
254 Posts
These are 700 x 28's. They've got to be a defective batch, they feel more like 695 x 28's. And they don't appear very wide either, more like 25's than 28's.
I was hoping to get some stretch once they got mounted, maybe I could even over-inflate them a bit. But this just seems like a lost cause, on a tire I can already tell is not gonna suit my needs or hold up very well around my old nemesis, i.e., goat heads.
I was hoping to get some stretch once they got mounted, maybe I could even over-inflate them a bit. But this just seems like a lost cause, on a tire I can already tell is not gonna suit my needs or hold up very well around my old nemesis, i.e., goat heads.
#14
Sophomore Member
Thread Starter
Join Date: Jan 2019
Posts: 2,531
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1628 Post(s)
Liked 1,059 Times
in
633 Posts
Mavic CXP 21, Mavic Aksium, DT Swiss r1800. I also have some tubeless-compatible HED rims I may try, but I need to wait until next week before I have my Kool Stop tool, which I fully expect to break while fighting with these tires, but if that's my fate, so be it.
Not helping things, is the weirdly-shaped rim hook that the beads of these tires have. It just doesn't want to engage with any of my rims very well. All of my various rims have a tendency to spit these tires right back out without engaging the bead very well at all. Whoever designed that bead hook needs to be fired immediately, IMO.
I tend not to return items I buy through the mail, but I may need to make an exception with these so-called "gravel tires".
Not helping things, is the weirdly-shaped rim hook that the beads of these tires have. It just doesn't want to engage with any of my rims very well. All of my various rims have a tendency to spit these tires right back out without engaging the bead very well at all. Whoever designed that bead hook needs to be fired immediately, IMO.
I tend not to return items I buy through the mail, but I may need to make an exception with these so-called "gravel tires".
#15
Senior Member
Join Date: Mar 2014
Location: Cascadia
Posts: 1,206
Bikes: Jamis Quest Comp
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 169 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
I thought the light file tread was why it was marketed as a gravel tire.
It's all right in hardpack, better than an actual slick. But not great in anything more textured than that. I'm also running the 26mm version on my road bike, though.
I had to resort to wiping motor oil on the tire, but I suppose something water or silicone based would work...
It's all right in hardpack, better than an actual slick. But not great in anything more textured than that. I'm also running the 26mm version on my road bike, though.
Don't give up! I run maybe 6-7 sets of these tires..4 sets of 700 x 28-slicks and a few in the 35-40ish size (sk;s). They can be a beast to mount, but they stretch and the second time mounting is MUCH easier. I've managed to mount all of them without the kool stop jack(suggestion..a "personal lube" does help), but the struggle led me to but the kool stop device. Used it once..a big help.
#17
Senior Member
https://www.crankbrothers.com/products/speedier-lever
I love this lever. The key feature to me is the knuckle guard to prevent skin loss if the lever slips, especially on bladed spokes...
I love this lever. The key feature to me is the knuckle guard to prevent skin loss if the lever slips, especially on bladed spokes...
Likes For Caliper:
#18
Sophomore Member
Thread Starter
Join Date: Jan 2019
Posts: 2,531
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1628 Post(s)
Liked 1,059 Times
in
633 Posts
https://www.crankbrothers.com/products/speedier-lever
I love this lever. The key feature to me is the knuckle guard to prevent skin loss if the lever slips, especially on bladed spokes...
I love this lever. The key feature to me is the knuckle guard to prevent skin loss if the lever slips, especially on bladed spokes...
Likes For Lemond1985:
#19
Sophomore Member
Thread Starter
Join Date: Jan 2019
Posts: 2,531
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1628 Post(s)
Liked 1,059 Times
in
633 Posts
I was fresh out of this stuff, and personal lube too (as luck would have it). So I tried smearing some Extra Virgin Olive Oil on the rim and the tire bead, and the tire slid right on. So it was more a matter of overcoming friction than anything else with this tire, as opposed to the bead being too small. I guess the rubber on a new tires has a tendency to not want to slide easily over aluminum rims. Learn something new every day, I guess.
#20
Non omnino gravis
#21
Full Member
Join Date: Oct 2010
Posts: 266
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 128 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
I had GK 38s on my bike and got four flats in about 6 months (tubed). 99% paved and the rest some smooth dirt and gravel. Before and after the GKs I used G-One 35s on the exact same routes and never got a single flat. About 1000 miles on each set I think.
#22
Life Feeds On Life
Join Date: Jan 2018
Location: Hondo,Texas
Posts: 2,143
Bikes: Too many Motobecanes
Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 4426 Post(s)
Liked 4,532 Times
in
3,032 Posts
Same here my tubeless rims are a SOB to mount tires on especially since I use tubes. I purchased another wheelset for my mountain bike that had regular old fashion clincher rims now changing tires is easy. So a flat in BFE will be a snap. Luckily in off road nowhere in Big Bend NP I never had a flat I would have manage but it would be a bloody finger endeavor. I know go tubeless but I don’t want to mess with it plus my MTB can sit for weeks as I mostly ride my gravel bike these days. When the MTB bug hits me, I hit some trails to mix it up and want rims that tires can easily be mounted to.
#23
Jedi Master
For motorcycle tires I use dish soap mixed with water applied with an old paint brush. Probably about the same thing as bubble juice. Can't recall using it for a bike tire, but I'm sure it would work the same.
#24
Senior Member
Join Date: Sep 2007
Location: Reston VA
Posts: 561
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 85 Post(s)
Liked 74 Times
in
55 Posts
I tried to mount the 32 mm SKs on Sun CR 18s with tubes. I couldn’t do it - first time in my life to fail to get a tire on a wheel. I finally got them to fit on Mavic Open Sports using soapy water, Pedro’s steel reinforced levers, and every other technique I coulf find. Then had a flat, probably due too overly aggressive use of the tire levers. They went on easier the second time and have worked fine since.
#25
If I own it, I ride it
Join Date: Nov 2005
Location: Cardinal Country
Posts: 5,580
Bikes: Lejeune(14), Raleigh, Raysport, Jan De Reus, Gazelle, Masi, B. Carré(4), Springfield, Greg Lemond, Andre Bertin, Schwinn Paramount
Mentioned: 56 Post(s)
Tagged: 0 Thread(s)
Quoted: 591 Post(s)
Likes: 0
Liked 663 Times
in
312 Posts
I am glad I am not the only one to have adventures mounting these tires. I ended up mounting them sans tubes and leaving them for a couple of weeks. Then came back and dismounted to install tubes. They were a bit easier but a tire jack was used. I thought they were only bears to mount on older 700c rims. So they are a PITA on newer rims? Seems all the new "hot tires" are a PITA to mount. I have recently mounted Vittorias and Specialized Turbo Cotton with similar efforts involved. I did try using tubeless tape on the Vittorias and cannot say it made much difference.