Bottom Bracket spacer
07-24-18, 03:09 PM
#1
Junior Member
Thread Starter
Bottom Bracket spacer
Hi, just pulled a Truative Square LE cartridge bracket from my friends 2004 Hardrock https://www.bikepedia.com/QuickBike/...spx?item=92367 its a 68x113 bracket, however there is a spacer on it, do I just put that spacer on a new Shimano UN-55 as well?
07-24-18, 03:50 PM
#2
Nigel
Join Date: Mar 2011
Location: San Jose, CA
Posts: 2,991
Bikes: 1980s and 1990s steel: CyclePro, Nishiki, Schwinn, SR, Trek........
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 384 Post(s)
Likes: 0
Liked 6 Times
in
6 Posts
Measure.
Is the chain line in the desired location?
Is the UN55 and Truative the same width; same distance from fixed cup to end of spindle?
Measurements of the parts you have will give you the answer.
Anything else is a GUESS and likely wrong because no one else has the parts to measure.
Is the chain line in the desired location?
Is the UN55 and Truative the same width; same distance from fixed cup to end of spindle?
Measurements of the parts you have will give you the answer.
Anything else is a GUESS and likely wrong because no one else has the parts to measure.
