[Help] Bike Identify
#1
Junior Member
Thread Starter
Join Date: May 2018
Posts: 13
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
[Help] Bike Identify
Hello, I bought a bike from a person who said that it was a 1978 bike. I'm in doubt of which brand, has the lugged different from the others, it is very long and sharp. I've found some similar ones, but I do not really know which one it is. Some photos attached.
The serial number is: 76L94508 or 6L94508 (I believe that in the beginning may be a risk in place of 7)
The serial number is: 76L94508 or 6L94508 (I believe that in the beginning may be a risk in place of 7)
#2
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,503
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7349 Post(s)
Liked 2,474 Times
in
1,437 Posts
The fork is bent.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
#5
Senior Member
Join Date: Nov 2003
Location: Soviet of Oregon or Pensacola FL
Posts: 5,342
Bikes: Still have a few left!
Mentioned: 48 Post(s)
Tagged: 0 Thread(s)
Quoted: 467 Post(s)
Liked 532 Times
in
267 Posts
My 1982 Lotus "Classique" has a top tube/head tube lug like that, but it has all Shimano 600 Arabesque components.
#6
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,629
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3871 Post(s)
Liked 2,568 Times
in
1,579 Posts
To such a degree that it can't be debated!
I dig the long points on the lugs.
I dig the long points on the lugs.
#7
Senior Member
Join Date: Nov 2004
Posts: 23,223
Mentioned: 654 Post(s)
Tagged: 1 Thread(s)
Quoted: 4722 Post(s)
Likes: 0
Liked 3,038 Times
in
1,876 Posts
Everything points to a 1977 model manufactured in late 1976. A '6L' prefix would be consistent with Bridgestone manufacture, while a '76L' prefix would be consistent with Fuji but both typically used SunTour/Sugino/Dia-Compe during this period,as oppsed tothe subject Takagi/Shimano. Given the corroborating date code on the Takagi crankset and the era appropriate 2nd generation Titlist rear derailleur, the components would appear to be OEM. One contract manufactured brand that would have a '76L prefix and use that headbadge rivet spacing would be Sekai. They also liked to spec long point lugs. However, offhand I can't recall any model using the Shimano/Takagi mix around this time. Doesn't look like a higher end frame. Possibly butted hi-tensile steel. What's the seat post diameter?
Edit: D'Oh! My mind my transposed the first two characters. '6L' would be consistent with a M-a-t-s-u-s-h-i-t-a serial number format, not Bridgestone,which would have been 'L6'! They did have a Panasonic Sport Deluxe model in 1977 with Shimano Titlist and what appears to be a Takagi crankset, though the catalog pictures show a claw version of the rear derailleur. I'm not sure if they used long point lugs and the badge was not riveted but it may have used pins on the backside?
Edit: D'Oh! My mind my transposed the first two characters. '6L' would be consistent with a M-a-t-s-u-s-h-i-t-a serial number format, not Bridgestone,which would have been 'L6'! They did have a Panasonic Sport Deluxe model in 1977 with Shimano Titlist and what appears to be a Takagi crankset, though the catalog pictures show a claw version of the rear derailleur. I'm not sure if they used long point lugs and the badge was not riveted but it may have used pins on the backside?
Last edited by T-Mar; 05-25-18 at 11:17 AM.
#8
Bad example
Join Date: Nov 2015
Location: Seattle and Reims
Posts: 3,071
Bikes: Peugeot: AO-8 1973, PA-10 1971, PR-10 1973, Sante 1988; Masi Gran Criterium 1975, Stevenson Tourer 1980, Stevenson Criterium 1981, Schwinn Paramount 1972, Rodriguez 2006, Gitane Federal ~1975, Holdsworth Pro, Follis 172 ~1973, Bianchi '62
Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 826 Post(s)
Liked 213 Times
in
97 Posts
Agreed, the fork is bent a little bit. It should be possible to straighten it, though.
__________________
Keeping Seattle’s bike shops in business since 1978
Keeping Seattle’s bike shops in business since 1978
#9
aka Tom Reingold
Join Date: Jan 2009
Location: New York, NY, and High Falls, NY, USA
Posts: 40,503
Bikes: 1962 Rudge Sports, 1971 Raleigh Super Course, 1971 Raleigh Pro Track, 1974 Raleigh International, 1975 Viscount Fixie, 1982 McLean, 1996 Lemond (Ti), 2002 Burley Zydeco tandem
Mentioned: 511 Post(s)
Tagged: 0 Thread(s)
Quoted: 7349 Post(s)
Liked 2,474 Times
in
1,437 Posts
It looks like it's the steerer tube. In that case, straighten it is difficult and dangerous.
__________________
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.
Tom Reingold, tom@noglider.com
New York City and High Falls, NY
Blogs: The Experienced Cyclist; noglider's ride blog
“When man invented the bicycle he reached the peak of his attainments.” — Elizabeth West, US author
Please email me rather than PM'ing me. Thanks.