Disks not ready
#127
pan y agua
Join Date: Aug 2005
Location: Jacksonville
Posts: 31,303
Bikes: Willier Zero 7; Merlin Extralight; Calfee Dragonfly tandem, Calfee Adventure tandem; Cervelo P2; Motebecane Ti Fly 29er; Motebecanne Phantom Cross; Schwinn Paramount Track bike
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1447 Post(s)
Liked 727 Times
in
372 Posts
Then you’re not doing it right. Ride your flatted tubular until there’s a lull, signal the wheel truck that you need a wheel, and you can be changed and chasing back on quickly. 15 second delay getting the disc to set in correctly when you’re panicked and rushing and or getting the thru axle to start threading can be the difference in a dnf and winning the race.
__________________
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
#128
pan y agua
Join Date: Aug 2005
Location: Jacksonville
Posts: 31,303
Bikes: Willier Zero 7; Merlin Extralight; Calfee Dragonfly tandem, Calfee Adventure tandem; Cervelo P2; Motebecane Ti Fly 29er; Motebecanne Phantom Cross; Schwinn Paramount Track bike
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1447 Post(s)
Liked 727 Times
in
372 Posts
With a disc wheel thru axle setup it’s totally faster to swap a whole bike. Hence Pro teams that can carry a backup bike set up for their Gc guys do that. They didn’t feel the need with Qr because it was as fast as a bike swap. My whole friggin point is we amateurs play in a world without those resources, and our equipment choices should be be made accordingly.
__________________
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
#129
Senior Member
Join Date: Jul 2009
Posts: 5,949
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3952 Post(s)
Liked 7,297 Times
in
2,947 Posts
Then you’re not doing it right. Ride your flatted tubular until there’s a lull, signal the wheel truck that you need a wheel, and you can be changed and chasing back on quickly. 15 second delay getting the disc to set in correctly when you’re panicked and rushing and or getting the thru axle to start threading can be the difference in a dnf and winning the race.
#130
Senior Member
Join Date: Nov 2015
Posts: 8,922
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 4717 Post(s)
Liked 1,882 Times
in
998 Posts
With a disc wheel thru axle setup it’s totally faster to swap a whole bike. Hence Pro teams that can carry a backup bike set up for their Gc guys do that. They didn’t feel the need with Qr because it was as fast as a bike swap. My whole friggin point is we amateurs p,any in a world without those resources, and our equipment choices should be be made accordingly.
How many times have you lost a race by a few seconds, due to a flat?
#131
pan y agua
Join Date: Aug 2005
Location: Jacksonville
Posts: 31,303
Bikes: Willier Zero 7; Merlin Extralight; Calfee Dragonfly tandem, Calfee Adventure tandem; Cervelo P2; Motebecane Ti Fly 29er; Motebecanne Phantom Cross; Schwinn Paramount Track bike
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1447 Post(s)
Liked 727 Times
in
372 Posts
My whole point in this thread is that the Pros play by different rules, and have different resources. Thus Pros racing disc brake bicycles doesn’t mean that we amateurs should do so as well.
__________________
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
Last edited by StanSeven; 02-13-21 at 04:43 PM. Reason: Quotes deleted post
#132
Senior Member
Join Date: Nov 2015
Posts: 8,922
Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 4717 Post(s)
Liked 1,882 Times
in
998 Posts
I couldn't possibly care less about Froome's opinion. We don't ride together.
#133
pan y agua
Join Date: Aug 2005
Location: Jacksonville
Posts: 31,303
Bikes: Willier Zero 7; Merlin Extralight; Calfee Dragonfly tandem, Calfee Adventure tandem; Cervelo P2; Motebecane Ti Fly 29er; Motebecanne Phantom Cross; Schwinn Paramount Track bike
Mentioned: 17 Post(s)
Tagged: 0 Thread(s)
Quoted: 1447 Post(s)
Liked 727 Times
in
372 Posts
I’m out. I grant that I’m arguing against a rising tide. Discs are the future and my point is largely consigned to history. Nonetheless, none of you have actually contradicted anything I’ve said. I think your need to validate your choices, or just win an argument has limited your ability to consider what I’ve actually said. Building straw men up, and tearing them down doesn’t change my point.
so whether UCI regs accelerated the switch to discs or not ultimately is at best an historical footnote. Sorry all of you were too close minded to even hear or consider what I said.
so whether UCI regs accelerated the switch to discs or not ultimately is at best an historical footnote. Sorry all of you were too close minded to even hear or consider what I said.
__________________
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
You could fall off a cliff and die.
You could get lost and die.
You could hit a tree and die.
OR YOU COULD STAY HOME AND FALL OFF THE COUCH AND DIE.
Likes For colnago62:
#135
Senior Member
Join Date: Jul 2009
Posts: 5,949
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3952 Post(s)
Liked 7,297 Times
in
2,947 Posts
#137
Senior Member
Join Date: Sep 2017
Posts: 7,879
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 6963 Post(s)
Liked 10,963 Times
in
4,688 Posts
Another disc vs rim brake thread.
Likes For Koyote:
#138
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,520
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20810 Post(s)
Liked 9,456 Times
in
4,672 Posts
And now dude is sending angsty PMs?
#139
Trying to keep up
Join Date: Jan 2007
Location: Fort Worth
Posts: 2,137
Bikes: Pinarello Prince, Orbea Onix, Ridley Fenix
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 79 Post(s)
Liked 136 Times
in
79 Posts
And I thought faculty members were able to rehash and continue pointless arguments with little hope for resolution. This is impressive.
A colleague of mine likes to paraphrase Kissinger who said something to the effect that faculty disputes are so intense because the stakes are so often so low. I've thought about that in reading this thread.
A colleague of mine likes to paraphrase Kissinger who said something to the effect that faculty disputes are so intense because the stakes are so often so low. I've thought about that in reading this thread.
#140
Senior Member
Join Date: Sep 2017
Posts: 7,879
Mentioned: 38 Post(s)
Tagged: 0 Thread(s)
Quoted: 6963 Post(s)
Liked 10,963 Times
in
4,688 Posts
And I thought faculty members were able to rehash and continue pointless arguments with little hope for resolution. This is impressive.
A colleague of mine likes to paraphrase Kissinger who said something to the effect that faculty disputes are so intense because the stakes are so often so low. I've thought about that in reading this thread.
A colleague of mine likes to paraphrase Kissinger who said something to the effect that faculty disputes are so intense because the stakes are so often so low. I've thought about that in reading this thread.
Last edited by Koyote; 02-12-21 at 06:44 AM.
Likes For Koyote:
#144
Senior Member
Couldn't care less what Froomie thinks about disc brakes. I like 'em!
#146
Full Member
Join Date: Apr 2013
Posts: 286
Bikes: Tcr advanced sl & Protos
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 116 Post(s)
Liked 60 Times
in
33 Posts
One thing I've wondered, watching the TDF and the Giro last year is if the brakes don't increase the crash rate when descending and braking through corners. Bike tires don't really have that much contact with the road for the speeds and the cornering limits that racers hit. Toss in faster stopping and it would seem to make questionable situations sketchier and increase the chances of breaking traction and crashing.
I installed hydro disc on both my kids' bikes so they could stop better, custom ordered my cross with disc and made sure the new gravel frame only used disc. Don't own a single carbon rim and don't plan to, I just like consistent, reliable stopping in any conditions. I'm better that's true for a lot of people.
I installed new discs today, took me 20 min each between screaming kids to cut the lines, route them through the frame, bleed them and set the calipers. Probably close to twice the time road rim brakes would take but pad replacement on the discs is much faster. I push a screw driver between the old pads to compress the piston, pull off the cotter pin, undo the screw that holds them in, slide out the old, slide in the new, reinstall screw and pin, install wheel and squeeze the lever. Sounds like more work but calipers require aligning the pads, toeing them in, releasing the previously taken up cable with the barrel adjuster or the fixing bolt, recentering the caliper and adjusting the cable to the new pads. If the pads have spacers, conical washers or in the case of V-brakes lots of both, it gets tedious not dropping those putting the pad fixing bolt in place. Cantis can be the worst with the straddle cable and getting the pads the same settings on both sides. Considering discs can go years with no trouble, I like them.
I'm a little beyond chubby and will really push the braking on my bike in the woods, fade has yet to be an issue.
What is a lot contact point? Not certain I've seen this one. As I mentioned above, with hydraulics centering and bleeding is quick and easy. Centering with cable disc can be annoying, but a properly set up thru axle bike really doesn't have disc issues in my experience.
I installed hydro disc on both my kids' bikes so they could stop better, custom ordered my cross with disc and made sure the new gravel frame only used disc. Don't own a single carbon rim and don't plan to, I just like consistent, reliable stopping in any conditions. I'm better that's true for a lot of people.
I installed new discs today, took me 20 min each between screaming kids to cut the lines, route them through the frame, bleed them and set the calipers. Probably close to twice the time road rim brakes would take but pad replacement on the discs is much faster. I push a screw driver between the old pads to compress the piston, pull off the cotter pin, undo the screw that holds them in, slide out the old, slide in the new, reinstall screw and pin, install wheel and squeeze the lever. Sounds like more work but calipers require aligning the pads, toeing them in, releasing the previously taken up cable with the barrel adjuster or the fixing bolt, recentering the caliper and adjusting the cable to the new pads. If the pads have spacers, conical washers or in the case of V-brakes lots of both, it gets tedious not dropping those putting the pad fixing bolt in place. Cantis can be the worst with the straddle cable and getting the pads the same settings on both sides. Considering discs can go years with no trouble, I like them.
I'm a little beyond chubby and will really push the braking on my bike in the woods, fade has yet to be an issue.
What is a lot contact point? Not certain I've seen this one. As I mentioned above, with hydraulics centering and bleeding is quick and easy. Centering with cable disc can be annoying, but a properly set up thru axle bike really doesn't have disc issues in my experience.
#147
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,520
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20810 Post(s)
Liked 9,456 Times
in
4,672 Posts
Here’s another opinion. Seems pretty smart. What do you think?
https://youtu.be/aJK_d6onNjo
https://youtu.be/aJK_d6onNjo
Likes For WhyFi:
#148
Advocatus Diaboli
Join Date: Feb 2015
Location: Wherever I am
Posts: 8,636
Bikes: Merlin Cyrene, Nashbar steel CX
Mentioned: 14 Post(s)
Tagged: 1 Thread(s)
Quoted: 4733 Post(s)
Liked 1,532 Times
in
1,003 Posts
On the weight thing, just thought I'd look, but I don't know if I'm comparing apples to apples?
I see a 2015 Emonda SLR H2 frameset here https://archive.trekbikes.com/uk/en/...ameset/details shows a weight of 690g.
I see the 2021 Emonda Rim frameset here https://www.trekbikes.com/us/en_US/b...olorCode=black shows a weight of 1,170g.
Yes, I'm comparing two rim brake frames. How much of the closing of the weight gap of discs vs rim bikes is because the manufacturers might be unnecessarily making their rim braked bikes heavier than they could otherwise be? (minimizing mold/design changes vs. their disc counterparts?).
I see a 2015 Emonda SLR H2 frameset here https://archive.trekbikes.com/uk/en/...ameset/details shows a weight of 690g.
I see the 2021 Emonda Rim frameset here https://www.trekbikes.com/us/en_US/b...olorCode=black shows a weight of 1,170g.
Yes, I'm comparing two rim brake frames. How much of the closing of the weight gap of discs vs rim bikes is because the manufacturers might be unnecessarily making their rim braked bikes heavier than they could otherwise be? (minimizing mold/design changes vs. their disc counterparts?).
#149
Senior Member
Join Date: Jan 2010
Location: TC, MN
Posts: 39,520
Bikes: R3 Disc, Haanjo
Mentioned: 354 Post(s)
Tagged: 1 Thread(s)
Quoted: 20810 Post(s)
Liked 9,456 Times
in
4,672 Posts
On the weight thing, just thought I'd look, but I don't know if I'm comparing apples to apples?
I see a 2015 Emonda SLR H2 frameset here https://archive.trekbikes.com/uk/en/...ameset/details shows a weight of 690g.
I see the 2021 Emonda Rim frameset here https://www.trekbikes.com/us/en_US/b...olorCode=black shows a weight of 1,170g.
Yes, I'm comparing two rim brake frames. How much of the closing of the weight gap of discs vs rim bikes is because the manufacturers might be unnecessarily making their rim braked bikes heavier than they could otherwise be? (minimizing mold/design changes vs. their disc counterparts?).
I see a 2015 Emonda SLR H2 frameset here https://archive.trekbikes.com/uk/en/...ameset/details shows a weight of 690g.
I see the 2021 Emonda Rim frameset here https://www.trekbikes.com/us/en_US/b...olorCode=black shows a weight of 1,170g.
Yes, I'm comparing two rim brake frames. How much of the closing of the weight gap of discs vs rim bikes is because the manufacturers might be unnecessarily making their rim braked bikes heavier than they could otherwise be? (minimizing mold/design changes vs. their disc counterparts?).
#150
Senior Member
Join Date: Jul 2009
Posts: 5,949
Bikes: Colnago, Van Dessel, Factor, Cervelo, Ritchey
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 3952 Post(s)
Liked 7,297 Times
in
2,947 Posts
On the weight thing, just thought I'd look, but I don't know if I'm comparing apples to apples?
I see a 2015 Emonda SLR H2 frameset here https://archive.trekbikes.com/uk/en/...ameset/details shows a weight of 690g.
I see the 2021 Emonda Rim frameset here https://www.trekbikes.com/us/en_US/b...olorCode=black shows a weight of 1,170g.
Yes, I'm comparing two rim brake frames. How much of the closing of the weight gap of discs vs rim bikes is because the manufacturers might be unnecessarily making their rim braked bikes heavier than they could otherwise be? (minimizing mold/design changes vs. their disc counterparts?).
I see a 2015 Emonda SLR H2 frameset here https://archive.trekbikes.com/uk/en/...ameset/details shows a weight of 690g.
I see the 2021 Emonda Rim frameset here https://www.trekbikes.com/us/en_US/b...olorCode=black shows a weight of 1,170g.
Yes, I'm comparing two rim brake frames. How much of the closing of the weight gap of discs vs rim bikes is because the manufacturers might be unnecessarily making their rim braked bikes heavier than they could otherwise be? (minimizing mold/design changes vs. their disc counterparts?).
Likes For tomato coupe: