What Else Did You Just Buy For Your Bike? Thread Thread Thread..... Thread
#4601
Senior Member
Join Date: Jun 2014
Location: Ontario, Canada
Posts: 4,624
Bikes: iele Latina, Miele Suprema, Miele Uno LS, Miele Miele Beta, MMTB, Bianchi Model Unknown, Fiori Venezia, Fiori Napoli, VeloSport Adamas AX
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1324 Post(s)
Liked 927 Times
in
640 Posts
Well, I was going to buy some Campagnolo Triomphe components buy instead I bought a Fiori Vincenza bike with a complete Triomphe groupset excluding the pedals and toe-clips but I did get a pair of Campagnolo Look Delta Cleat compatible clipless pedals and they should be posted to me tomorrow. When I finish cleaning up the bike I'll post some images of it.
Cheers
Cheers
Likes For Miele Man:
#4602
Senior Member
Join Date: May 2013
Location: Greenwood SC USA
Posts: 2,252
Bikes: 2002 Mercian Vincitore, 1982 Mercian Colorado, 1976 Puch Royal X, 1973 Raleigh Competition, 1971 Gitane Tour de France and others
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 823 Post(s)
Liked 1,395 Times
in
694 Posts
They arrived last week but I didn't have the chance to set them up or try them out 'till last night - I scored a used set of Kreitler alloy-capped 4.5-in rollers on the 'Bay, bought a new tension band from another source, then found something to replace a missing pin to lock the length. I set it up in a doorway rode my Gitane fixed-gear conversion long enough to know that room needs a fan and I will need a lot more time to get comfortable on those things. So far so good, though, and I foresee a lot of time on them this winter.
#4603
- Soli Deo Gloria -
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,779
Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix
Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times
in
469 Posts
Gonna see whether Compass are just hype or if they are real.
#4604
Senior Member
Join Date: Feb 2014
Location: SD
Posts: 2,745
Bikes: Handsome Fredward, Trek 1.1
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 481 Post(s)
Liked 131 Times
in
47 Posts
Lost the dust/self-extracting cap from my SRAM crank at the races last weekend. Ordered two so I'd have a spare.
#4605
Senior Member
Join Date: May 2013
Location: Greenwood SC USA
Posts: 2,252
Bikes: 2002 Mercian Vincitore, 1982 Mercian Colorado, 1976 Puch Royal X, 1973 Raleigh Competition, 1971 Gitane Tour de France and others
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 823 Post(s)
Liked 1,395 Times
in
694 Posts
Ordered 64 ACI-Alpina butted spokes to build some wheels around some Surly track hubs - now to get the Sun CR-18s to complete the job.
#4607
Senior Member
Heard a lot about these, never tried anything other than stock pads. Wasn't sure if I should get the wet weather salmon ones, or the all black normal ones so I went with the dual compound.
#4608
- Soli Deo Gloria -
Join Date: Aug 2015
Location: Northwest Georgia
Posts: 14,779
Bikes: 2018 Rodriguez Custom Fixed Gear, 2017 Niner RLT 9 RDO, 2015 Bianchi Pista, 2002 Fuji Robaix
Mentioned: 235 Post(s)
Tagged: 0 Thread(s)
Quoted: 6844 Post(s)
Liked 736 Times
in
469 Posts
Set up with proper toe in so they don't squeal and you won't regret them.
-Tim-
#4609
Senior Member
So far so good, went out for my first ride with them last night and they are way better than what I had before. The pads on my Tektro R559 were horrendous, usually they aren't bad but I'll probably replace them for these every time now.
#4610
Senior Member
Join Date: May 2013
Location: Greenwood SC USA
Posts: 2,252
Bikes: 2002 Mercian Vincitore, 1982 Mercian Colorado, 1976 Puch Royal X, 1973 Raleigh Competition, 1971 Gitane Tour de France and others
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 823 Post(s)
Liked 1,395 Times
in
694 Posts
An eBay score - Brooks B17 Aged in need of a replacement rivet and some Proofide, $15 and shipping -
#4611
Senior Member
A friend gave me this sweet Park work stand.
Park work stand
Park work stand
#4612
Senior Member
Join Date: Sep 2019
Location: Kuala Lumpur, Malaysia
Posts: 54
Bikes: Mongoose Maurice FS 2011 fixed gear, custom 2017 Haro Master Flatland bmx, Contrast FL475 mid school flatland bmx
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 15 Post(s)
Likes: 0
Liked 11 Times
in
10 Posts
Hi all, Im a 48yrs old noob from Malaysia. I got a bit off topic question here; if I were to share online buying experiences in regards to a Chinese online shopping website, will that considered to be insensitive considering the ongoing trade & tariff thing? Tks in advance.
#4613
Full Member
Join Date: Aug 2018
Posts: 303
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 99 Post(s)
Liked 115 Times
in
78 Posts
Today I bought a cheap (£40) Bike Hut work stand from Halfords. I had expected to have to pay 2 - 3 times as much for something like a Park Tools one, and had been putting off the purchase for that reason.
I'm really impressed. It is heavy (in a good way) solid and stable, with plenty of adjustment, and will hold a bike up with the handlebars at shoulder height (or more) with plenty of clearance to turn the cranks (with pedals attached) if you're working on gears or brakes. It will grip the bike by the top tube or seat tube. It even comes with a little tray to put odds and ends on, which is pierced around the edge for screwdrivers or Allen keys.
I had expected it to be a disappointingly flimsy stop gap until I could afford better, but I'm very pleased with it.
Of course, a better one would be better. For example, this one has knurled knobs for tightening most of the bits that need tightening. A cam lever would be quicker and better, but more expensive. It's not often I'd go out of my way to recommend a purchase, but this one gets my seal of approval for those who want to do bike maintenance without back ache.
I'm really impressed. It is heavy (in a good way) solid and stable, with plenty of adjustment, and will hold a bike up with the handlebars at shoulder height (or more) with plenty of clearance to turn the cranks (with pedals attached) if you're working on gears or brakes. It will grip the bike by the top tube or seat tube. It even comes with a little tray to put odds and ends on, which is pierced around the edge for screwdrivers or Allen keys.
I had expected it to be a disappointingly flimsy stop gap until I could afford better, but I'm very pleased with it.
Of course, a better one would be better. For example, this one has knurled knobs for tightening most of the bits that need tightening. A cam lever would be quicker and better, but more expensive. It's not often I'd go out of my way to recommend a purchase, but this one gets my seal of approval for those who want to do bike maintenance without back ache.
Likes For Gods lonely man:
#4617
Not actually Tmonk
Join Date: Jun 2007
Location: San Diego, CA
Posts: 14,140
Bikes: road, track, mtb
Mentioned: 140 Post(s)
Tagged: 0 Thread(s)
Quoted: 2640 Post(s)
Liked 3,153 Times
in
1,660 Posts
I bought my buddy's TT bike, a Felt DA2. Now time to patiently hunt ebay or CL for a deal on a disc wheel...
__________________
"Your beauty is an aeroplane;
so high, my heart cannot bear the strain." -A.C. Jobim, Triste
"Your beauty is an aeroplane;
so high, my heart cannot bear the strain." -A.C. Jobim, Triste
#4618
Senior Member
Join Date: May 2013
Location: Greenwood SC USA
Posts: 2,252
Bikes: 2002 Mercian Vincitore, 1982 Mercian Colorado, 1976 Puch Royal X, 1973 Raleigh Competition, 1971 Gitane Tour de France and others
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 823 Post(s)
Liked 1,395 Times
in
694 Posts
A pair of Phil Wood 6901 sealed bearings to replace the original 7901s in my c.2002 Surly New Track hubs. I gladly paid the experienced older mechanic at my LBS to swap them out for me, and this weekend was delighted to have my favorite bike back. It is soooo much better now!
Also got four rolls of Newbaum's tape for a couple of other bikes and a new pair of crochet-back gloves ...
Also got four rolls of Newbaum's tape for a couple of other bikes and a new pair of crochet-back gloves ...
Likes For rustystrings61:
Likes For ceelint:
#4621
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,792
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3591 Post(s)
Liked 3,401 Times
in
1,935 Posts
Mavic threadless bottom bracket:
Last edited by JohnDThompson; 10-19-19 at 06:08 PM.
Likes For JohnDThompson:
#4624
Clark W. Griswold
Join Date: Mar 2014
Location: ,location, location
Posts: 13,558
Bikes: Foundry Chilkoot Ti W/Ultegra Di2, Salsa Timberjack Ti, Cinelli Mash Work RandoCross Fun Time Machine, 1x9 XT Parts Hybrid, Co-Motion Cascadia, Specialized Langster, Phil Wood Apple VeloXS Frame (w/DA 7400), R+M Supercharger2 Rohloff, Habanero Ti 26
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 4365 Post(s)
Liked 4,006 Times
in
2,675 Posts
I bought two of these. Love Spurcycle bells and 3DV so I just had to do it. Wish the front bolt as also 3DV but can't have everything.
#4625
Junior Member
I just bought a set of USB chargeable front and rear lights, a nice Topeak pump, a tactical light with a cool handlebar clamp. oh—and they came with a bike!
A 6KU FGSS. GASP!
I know, the hubs, headset and crank are cheapo cheesy, but dang it, the frame is right nicely done, and 6061 aluminum to boot.
I couldn’t help myself. The price was way too good to say no, especially for an unused bike, loaded with gear I was going to get anyway.
If I end up liking the geometry it will be a blueprint for the Columbus lugged frame I’m building.
cheers,
Mikey
A 6KU FGSS. GASP!
I know, the hubs, headset and crank are cheapo cheesy, but dang it, the frame is right nicely done, and 6061 aluminum to boot.
I couldn’t help myself. The price was way too good to say no, especially for an unused bike, loaded with gear I was going to get anyway.
If I end up liking the geometry it will be a blueprint for the Columbus lugged frame I’m building.
cheers,
Mikey
Last edited by reconnaissance; 11-05-19 at 09:03 PM. Reason: Clarity