Go Back  Bike Forums > Bike Forums > Commuting
Reload this Page >

Anyone remove and reinstall their rack regularly?

Notices
Commuting Bicycle commuting is easier than you think, before you know it, you'll be hooked. Learn the tips, hints, equipment, safety requirements for safely riding your bike to work.

Anyone remove and reinstall their rack regularly?

Old 05-07-20, 04:44 PM
  #1  
ABQIan
Junior Member
Thread Starter
 
Join Date: Apr 2020
Location: Albuquerque, NM
Posts: 19

Bikes: Lynskey R230, Bianchi Vigorelli, Jamis Dragonslayer, Surly Cross Check, EAI Bareknuckle

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 3 Times in 3 Posts
Anyone remove and reinstall their rack regularly?

I'm talking about a 50 lbs.+ rated rack that uses the frame bosses on the seatstay and holes at the dropout. I have a commuter/touring bike I use for all my errands and it has a heavier-duty rack for large grocery runs, etc., and I've toured with that rack as well. I quite enjoy the feel of the bike for recreational riding, though, when I take the rack off.

I've heard people warn against doing this with regularity, and I'm wondering (a) if that is your experience and (b) if you've tried alternative mounting methods that make it less troublesome. I'm not looking for a quick-release, seatpost rack, or other solution-- I quite enjoy my burly Tubus and just wanted to see if people ever go back and forth with their mounting.

Thanks
ABQIan is offline  
Old 05-07-20, 05:06 PM
  #2  
Joe Bikerider
Senior Member
 
Join Date: Jul 2017
Location: Walnut Creek, CA
Posts: 754

Bikes: 1969 Peugeot PX10, 1992 Della Santa, Linus Roadster 8, Biria 700C ST-8

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 785 Post(s)
Liked 500 Times in 317 Posts
No. My rack came on the bike and while I have checked the attachments sometimes that’s it.
Joe Bikerider is offline  
Likes For Joe Bikerider:
Old 05-07-20, 05:38 PM
  #3  
rseeker
Senior Member
 
rseeker's Avatar
 
Join Date: May 2016
Location: Southeast US
Posts: 937
Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 318 Post(s)
Liked 149 Times in 104 Posts
What's the supposed risk? Wearing out the frame threading?
rseeker is offline  
Old 05-07-20, 06:58 PM
  #4  
ABQIan
Junior Member
Thread Starter
 
Join Date: Apr 2020
Location: Albuquerque, NM
Posts: 19

Bikes: Lynskey R230, Bianchi Vigorelli, Jamis Dragonslayer, Surly Cross Check, EAI Bareknuckle

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 3 Post(s)
Likes: 0
Liked 3 Times in 3 Posts
Originally Posted by rseeker
What's the supposed risk? Wearing out the frame threading?
Yes, I had an older bike, since sold, where one of them had been stripped, though no idea if that was from normal use-- I had picked it up used. I've been careful with my current bike but I wonder if I'm pushing it. I do grease bolts/torque appropriately, though.
ABQIan is offline  
Likes For ABQIan:
Old 05-07-20, 07:07 PM
  #5  
Papa Tom
Senior Member
 
Join Date: Aug 2008
Posts: 4,440
Mentioned: 23 Post(s)
Tagged: 0 Thread(s)
Quoted: 863 Post(s)
Liked 234 Times in 136 Posts
I don't remove the rack, but I do slide my Trek bag on and off the rack and, wow, what a weight difference THAT makes!
Papa Tom is offline  
Likes For Papa Tom:
Old 05-07-20, 08:33 PM
  #6  
alloo
Full Member
 
alloo's Avatar
 
Join Date: Apr 2019
Location: Albuquerque, NM
Posts: 490

Bikes: 2022 Priority Coast, 2022 Priority Current

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 175 Post(s)
Liked 137 Times in 99 Posts
My rack stays on the bike, but the bags come off.
alloo is offline  
Likes For alloo:
Old 05-07-20, 11:38 PM
  #7  
Darth Lefty 
Disco Infiltrator
 
Darth Lefty's Avatar
 
Join Date: May 2013
Location: Folsom CA
Posts: 13,775

Bikes: Stormchaser, Paramount, Tilt, Samba tandem

Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,102 Times in 1,366 Posts
No, but my fenders come off a few weeks after the time change and go back on when it changes back
__________________
Genesis 49:16-17
Darth Lefty is offline  
Old 05-08-20, 10:28 AM
  #8  
pdlamb
Senior Member
 
Join Date: Dec 2010
Location: northern Deep South
Posts: 8,844

Bikes: Fuji Touring, Novara Randonee

Mentioned: 36 Post(s)
Tagged: 0 Thread(s)
Quoted: 2575 Post(s)
Liked 1,900 Times in 1,192 Posts
Originally Posted by alloo
My rack stays on the bike, but the bags come off.
Ditto.

I did take the rack off one bike 6-8 years ago. It was an aluminum rack that came with the bike, and the panniers had rubbed about a third of the way through the struts. New Tubus steel rack is shiny in those spots.
pdlamb is offline  
Likes For pdlamb:
Old 05-08-20, 04:44 PM
  #9  
RubeRad
Keepin it Wheel
 
RubeRad's Avatar
 
Join Date: Aug 2011
Location: San Diego
Posts: 10,238

Bikes: Surly CrossCheck, Krampus

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Liked 3,399 Times in 2,510 Posts
Maybe a couple times a year I'll take the rack off my crosscheck, but I really don't enjoy recreational riding on the road, so there's not much point.
RubeRad is offline  
Old 05-08-20, 06:42 PM
  #10  
Digger Goreman
Quidam Bike Super Hero
 
Digger Goreman's Avatar
 
Join Date: Jan 2019
Location: Stone Mountain, GA (Metro Atlanta, East)
Posts: 1,150

Bikes: 1995 Trek 800 Sport, aka, "CamelTrek"

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 331 Post(s)
Liked 415 Times in 282 Posts
My racks are there to provide service options and stay in place. Today was recycle run, so bigger panniers on front low riders with a few cans in trunk on back... smaller, back bags stayed home. Another day it was collapsed boxes on the front top rack. Or the bottled water run with all bags pitching in.

Last edited by Digger Goreman; 05-08-20 at 06:49 PM.
Digger Goreman is offline  
Old 05-09-20, 11:38 AM
  #11  
Daniel4
Senior Member
 
Join Date: Jul 2013
Location: Toronto
Posts: 3,497

Bikes: Sekine 1979 ten speed racer

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 1477 Post(s)
Liked 637 Times in 436 Posts
No but I keep losing the mounting screw that goes on the frame at the rear wheel. I keep forgetting to double-check it before and after all my rides or to just pour glue all over it.
Daniel4 is offline  
Old 05-09-20, 07:39 PM
  #12  
Nyah
QR-disc must die!!!
 
Join Date: Sep 2018
Location: Shenandoah Valley, Northern Virginia.
Posts: 703

Bikes: '99 Trek 520, '20 Kona Sutra (FOR SALE 48cm), '21 Simon-Bikes mini-velo and a chromoly-framed folding bicycle with drop-bars and V-brakes, that rolls even while folded.

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 397 Post(s)
Likes: 0
Liked 199 Times in 147 Posts
I've been planning to do this. I'm currently using my original touring bicycle Trek 520 as my grocery getter. On the cheap aluminum rear rack that came with it I have a pair of Wald 582 shopping pannier baskets, which would be too difficult to remove and reinstall multiple times. The rack is held by four allen bolts in the usual places. If I wanted to put trekking panniers on the bicycle, I'd remove the cheaper rack with shopping basket panniers still attached and get a new, stronger rack for which to tour with.

Be careful not to cross-thread your bolts when re-installing your racks.

If you're afraid that the bolts might work themselves loose, use blue threadlocker (locktight, etc) on the threads of the bolts which hold it on.

Last edited by Nyah; 05-09-20 at 07:44 PM.
Nyah is offline  
Old 05-11-20, 08:11 AM
  #13  
Nyah
QR-disc must die!!!
 
Join Date: Sep 2018
Location: Shenandoah Valley, Northern Virginia.
Posts: 703

Bikes: '99 Trek 520, '20 Kona Sutra (FOR SALE 48cm), '21 Simon-Bikes mini-velo and a chromoly-framed folding bicycle with drop-bars and V-brakes, that rolls even while folded.

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 397 Post(s)
Likes: 0
Liked 199 Times in 147 Posts
Does the issue happen just with experimental materials such as aluminum and carbon fiber?
Nyah is offline  
Old 05-25-20, 11:40 AM
  #14  
hermanchauw
Senior Member
 
hermanchauw's Avatar
 
Join Date: May 2014
Location: Singapore
Posts: 470

Bikes: Voodoo Hoodoo, Linus Libertine

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 106 Post(s)
Likes: 0
Liked 15 Times in 9 Posts

hermanchauw is offline  
Likes For hermanchauw:
Old 05-25-20, 12:08 PM
  #15  
79pmooney
Senior Member
 
79pmooney's Avatar
 
Join Date: Oct 2014
Location: Portland, OR
Posts: 12,827

Bikes: (2) ti TiCycles, 2007 w/ triple and 2011 fixed, 1979 Peter Mooney, ~1983 Trek 420 now fixed and ~1973 Raleigh Carlton Competition gravel grinder

Mentioned: 128 Post(s)
Tagged: 0 Thread(s)
Quoted: 4743 Post(s)
Liked 3,860 Times in 2,509 Posts
In the early days of my Pete Mooney, the rear rack came on and off as needed, Year 5, I had a replacement fork made with braze-ons for a Lowrider which also came on and off, Now the swaps are far less often and the bike has not toured for many years but it spent the '00s and first half of the teens as a farmers market bike so those racks saw real use.

With carefully done threading and care starting bolts, those dropout eyes should handle the changes many many times. And when the threads do go, a slightly longer bolt and nut works just fine on most bikes. I've had bikes that came without threading and older bikes that had them no longer. Small PITA but far from a frame killer.

Oh , my experience is all with steel and titanium frames, I've never owned either aluminum or carbon fiber. (The ti frames have only seen fenders, not racks but the fenders come on and off a lot.
79pmooney is online now  
Old 05-25-20, 02:31 PM
  #16  
Darth Lefty 
Disco Infiltrator
 
Darth Lefty's Avatar
 
Join Date: May 2013
Location: Folsom CA
Posts: 13,775

Bikes: Stormchaser, Paramount, Tilt, Samba tandem

Mentioned: 72 Post(s)
Tagged: 0 Thread(s)
Quoted: 3126 Post(s)
Liked 2,102 Times in 1,366 Posts
Originally Posted by Nyah
Does the issue happen just with experimental materials such as aluminum and carbon fiber?
Not at all! Braze-ons made of flint are known to be particularly brittle, even more so than cast iron.
__________________
Genesis 49:16-17
Darth Lefty is offline  
Likes For Darth Lefty:
Old 05-25-20, 08:56 PM
  #17  
Nyah
QR-disc must die!!!
 
Join Date: Sep 2018
Location: Shenandoah Valley, Northern Virginia.
Posts: 703

Bikes: '99 Trek 520, '20 Kona Sutra (FOR SALE 48cm), '21 Simon-Bikes mini-velo and a chromoly-framed folding bicycle with drop-bars and V-brakes, that rolls even while folded.

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 397 Post(s)
Likes: 0
Liked 199 Times in 147 Posts
What issue are people having with this?
Nyah is offline  
Old 05-26-20, 10:06 AM
  #18  
RubeRad
Keepin it Wheel
 
RubeRad's Avatar
 
Join Date: Aug 2011
Location: San Diego
Posts: 10,238

Bikes: Surly CrossCheck, Krampus

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 26 Post(s)
Liked 3,399 Times in 2,510 Posts
hermanchauw, is that just a grub screw in a standard braze-on, with a bolt and washer as locknuts? Or did you drill&tap your seatstay to screw that in?
RubeRad is offline  
Old 05-28-20, 10:58 PM
  #19  
Norc
Junior Member
 
Join Date: Apr 2020
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 0 Times in 0 Posts
I've taken my rack on and off maybe 20 times? doesn't seem worse for wear.
Norc is offline  
Old 05-29-20, 11:42 PM
  #20  
yamsyamsyams
Senior Member
 
Join Date: Dec 2011
Posts: 305
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 44 Post(s)
Liked 41 Times in 20 Posts
I’ve done this but had a threaded eyelet located at the seat stay stripped after a while so stopped taking off the rear rack.
yamsyamsyams is offline  
Old 06-02-20, 03:41 AM
  #21  
hermanchauw
Senior Member
 
hermanchauw's Avatar
 
Join Date: May 2014
Location: Singapore
Posts: 470

Bikes: Voodoo Hoodoo, Linus Libertine

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 106 Post(s)
Likes: 0
Liked 15 Times in 9 Posts
Originally Posted by RubeRad
hermanchauw, is that just a grub screw in a standard braze-on, with a bolt and washer as locknuts? Or did you drill&tap your seatstay to screw that in?
standard braze-on.
hermanchauw is offline  
Old 06-02-20, 06:48 AM
  #22  
u235
Senior Member
 
u235's Avatar
 
Join Date: Mar 2017
Posts: 1,185
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 437 Post(s)
Liked 133 Times in 86 Posts
I take mine on and off, maybe 3x a year so not much. My theory from general mechanical knowledge is you have a higher risk of damaging your threads from:
1. The screw working itself loose and moving around gradually damaging the threads
2. Over tightening
To prevent 1 people often use 2. Use a threadlocker to reduce the risk of both of those greatly and can fill in some voids and reduce vibration and movement. Racks put very little force outwards on a screw, the screw is just "there" to provide something to suspend the eyelets from falling. The tightness required is only to prevent the screw from vibrating and falling out which threadlocker does. A $5 tube can last you years if it doesn't leak out first.

Also, use the softest screw available (aluminum?). Allow any potential damage to happen to the screw instead of the boss.
u235 is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.