Show me your wheel building setup
#1
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
Show me your wheel building setup
Does anyone have pictures of the shop setup you use for wheel building?
I'm in the process of trying to get my shop organized. Having cleaned the Augean stable that is my man cave, I can finally get to my workbench and vise again, However, the workbench surface is over three feet off the floor (not my doing). By the time I put my truing stand in the vise, I have to be standing to have the hub at eye level. Even with a proper drafting chair at full extension, I can't sit high enough to get a good viewing angle. So, I'm goin to have to figure out something different. I was thinking maybe I'd build a table for this. But I need inspiration. What have you got?
I'm in the process of trying to get my shop organized. Having cleaned the Augean stable that is my man cave, I can finally get to my workbench and vise again, However, the workbench surface is over three feet off the floor (not my doing). By the time I put my truing stand in the vise, I have to be standing to have the hub at eye level. Even with a proper drafting chair at full extension, I can't sit high enough to get a good viewing angle. So, I'm goin to have to figure out something different. I was thinking maybe I'd build a table for this. But I need inspiration. What have you got?
__________________
My Bikes
My Bikes
#2
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,624
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3883 Post(s)
Liked 6,476 Times
in
3,205 Posts
I like to sit on my living room floor and lace wheels, then true 'em up in an upside-down frame right there in front of the tv with an old TCM movie on, like McCabe and Mrs Miller. I jog over to the kitchen counter to perfect dish using a couple stacks of indie cd jewel cases, like Wilco's Summerteeth.
Likes For SurferRosa:
#3
Senior Member
Join Date: Dec 2014
Location: Central Virginia
Posts: 4,778
Bikes: Numerous
Mentioned: 150 Post(s)
Tagged: 0 Thread(s)
Quoted: 1676 Post(s)
Liked 3,089 Times
in
911 Posts
I recognize this is a bike frame and not a wheel but this is where I do my wheel building. I bring my Park truing stand up from the basement and sit on the sofa. The lighting is better and more comfortable.
Imagine, if you will, a Park truing stand, a rim, hub and some spokes here
Imagine, if you will, a Park truing stand, a rim, hub and some spokes here
__________________
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur
Likes For Spaghetti Legs:
#4
Senior Member
Join Date: Jan 2015
Location: Los Angeles
Posts: 4,703
Bikes: 82 Medici, 2011 Richard Sachs, 2011 Milwaukee Road
Mentioned: 55 Post(s)
Tagged: 0 Thread(s)
Quoted: 1947 Post(s)
Liked 2,010 Times
in
1,109 Posts
What truing stand are you using? I have the Park 2.whatever and use a pair of c clamps and clamp it at the edge of the work bench. That might do it.
edit: building a dedicated table sounds like fun. Consider that some procedures IME are more easily done standing while others are done sitting.
edit: building a dedicated table sounds like fun. Consider that some procedures IME are more easily done standing while others are done sitting.
__________________
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
I don't do: disks, tubeless, e-shifting, or bead head nymphs.
Last edited by Classtime; 08-19-20 at 07:45 PM.
Likes For P!N20:
#6
Overdoing projects
Join Date: Oct 2011
Location: Rotterdam, former republic of the Netherlands
Posts: 2,397
Bikes: Batavus Randonneur GL, Gazelle Orange Excellent, Gazelle Super Licht, Gazelle Grand Tourist, Gazelle Lausanne, Gazelle Tandem, Koga-Miyata SilverAce, Koga-Miyata WorldTraveller
Mentioned: 58 Post(s)
Tagged: 0 Thread(s)
Quoted: 784 Post(s)
Liked 1,238 Times
in
686 Posts
Likes For JaccoW:
#7
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,034
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4510 Post(s)
Liked 6,377 Times
in
3,667 Posts
Does anyone have pictures of the shop setup you use for wheel building?
I'm in the process of trying to get my shop organized. Having cleaned the Augean stable that is my man cave, I can finally get to my workbench and vise again, However, the workbench surface is over three feet off the floor (not my doing). By the time I put my truing stand in the vise, I have to be standing to have the hub at eye level. Even with a proper drafting chair at full extension, I can't sit high enough to get a good viewing angle. So, I'm goin to have to figure out something different. I was thinking maybe I'd build a table for this. But I need inspiration. What have you got?
I'm in the process of trying to get my shop organized. Having cleaned the Augean stable that is my man cave, I can finally get to my workbench and vise again, However, the workbench surface is over three feet off the floor (not my doing). By the time I put my truing stand in the vise, I have to be standing to have the hub at eye level. Even with a proper drafting chair at full extension, I can't sit high enough to get a good viewing angle. So, I'm goin to have to figure out something different. I was thinking maybe I'd build a table for this. But I need inspiration. What have you got?
There's also the old bench grinder stand made out of an old car, wheel, big pipe and plate for mounting.
#8
Senior Member
Join Date: Dec 2005
Posts: 17,155
Mentioned: 481 Post(s)
Tagged: 0 Thread(s)
Quoted: 3808 Post(s)
Liked 6,681 Times
in
2,609 Posts
I lace at the kitchen table and then true on my Park stand down in the basement. I have the stand bolted to its own platform, and I drag it out and put it on my workbench. That’s a good height for me.
#9
Friendship is Magic
Join Date: Nov 2010
Location: Sacramento, CA
Posts: 22,984
Bikes: old ones
Mentioned: 304 Post(s)
Tagged: 0 Thread(s)
Quoted: 26402 Post(s)
Liked 10,374 Times
in
7,203 Posts
I use a portable, folding truing stand (the one that Performance used to sell) for the truing, set up on that same table, because the light is very good there.
When I'm not using this stuff, it all hangs on a pegboard in a tool closet in the garage.
#10
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
I've got a Park 2.2. Nice and hefty. Recently my practice has been to plunk it on the coffee table in front of the couch. That puts the base of it about knee level when I'm seated and gives me a pretty good view but maybe has me crouching over too much. That's the reason I am asking for pictures. I'd like to visualize what work surface height works well for other people.
__________________
My Bikes
My Bikes
#11
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
I recognize this is a bike frame and not a wheel but this is where I do my wheel building. I bring my Park truing stand up from the basement and sit on the sofa. The lighting is better and more comfortable.
Imagine, if you will, a Park truing stand, a rim, hub and some spokes here
Imagine, if you will, a Park truing stand, a rim, hub and some spokes here
__________________
My Bikes
My Bikes
#12
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
__________________
My Bikes
My Bikes
Likes For Andy_K:
#13
Senior Member
Join Date: Mar 2015
Location: Western MI
Posts: 2,769
Mentioned: 45 Post(s)
Tagged: 0 Thread(s)
Quoted: 656 Post(s)
Liked 469 Times
in
302 Posts
I have an old desk in my bike cave where I can sit and labor over oval-shaped vintage rims for hours. I’ve moved on from string, ruler and tuning forks to the fancy blue implements.
#14
smelling the roses
Join Date: Nov 2010
Location: Tixkokob, Yucatán, México
Posts: 15,320
Bikes: 79 Trek 930, 80 Trek 414, 84 Schwinn Letour Luxe (coupled), 92 Schwinn Paramount PDG 5
Mentioned: 104 Post(s)
Tagged: 1 Thread(s)
Quoted: 7081 Post(s)
Liked 901 Times
in
612 Posts
I build using the Roger Musson method, complete with his home built truing stand and dishing tool. That setup gets moved to a convenient location on the bench when the time comes. I enjoy truing standing up. My lacing program leaves a lot to be desired. The coffee table idea has promise. I'll look into building such a thing. I'll post pics of the stand and dishing tool in a bit. The system works very well.
#15
Senior Member
Join Date: Jan 2013
Posts: 2,678
Bikes: too many sparkly Italians, some sweet Americans and a couple interesting Japanese
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 569 Post(s)
Liked 581 Times
in
409 Posts
I build using the Roger Musson method, complete with his home built truing stand and dishing tool. That setup gets moved to a convenient location on the bench when the time comes. I enjoy truing standing up. My lacing program leaves a lot to be desired. The coffee table idea has promise. I'll look into building such a thing. I'll post pics of the stand and dishing tool in a bit. The system works very well.
#16
Half way there
Join Date: Sep 2015
Location: North Carolina
Posts: 2,956
Bikes: Many, and the list changes frequently
Mentioned: 5 Post(s)
Tagged: 0 Thread(s)
Quoted: 986 Post(s)
Liked 880 Times
in
527 Posts
Here is a lacing stand I built a few years ago. It makes the whole lacing process much easier. For truing, I use a standard Park TS2 + an old Minoura dishing gauge.
Likes For Moe Zhoost:
#17
Bike Butcher of Portland
Join Date: Jul 2014
Location: Portland, OR
Posts: 11,634
Bikes: It's complicated.
Mentioned: 1299 Post(s)
Tagged: 0 Thread(s)
Quoted: 4678 Post(s)
Liked 5,795 Times
in
2,281 Posts
Similar, I'll lace in the living room, true in the Atelier. My Park truing stand goes into my main vise which puts my working height at eye level while standing. Like most things, you want to be in a comfortable position while doing the work.
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
#18
smelling the roses
Join Date: Nov 2010
Location: Tixkokob, Yucatán, México
Posts: 15,320
Bikes: 79 Trek 930, 80 Trek 414, 84 Schwinn Letour Luxe (coupled), 92 Schwinn Paramount PDG 5
Mentioned: 104 Post(s)
Tagged: 1 Thread(s)
Quoted: 7081 Post(s)
Liked 901 Times
in
612 Posts
I build using the Roger Musson method, complete with his home built truing stand and dishing tool. That setup gets moved to a convenient location on the bench when the time comes. I enjoy truing standing up. My lacing program leaves a lot to be desired. The coffee table idea has promise. I'll look into building such a thing. I'll post pics of the stand and dishing tool in a bit. The system works very well.
Dishing guage takes handheld pointer
Lateral truing guide on the left; radial on the right
#19
Senior Member
Join Date: May 2008
Location: Fredericksburg, Va
Posts: 9,579
Bikes: '65 Frejus TDF, '73 Bottecchia Giro d'Italia, '83 Colnago Superissimo, '84 Trek 610, '84 Trek 760, '88 Pinarello Veneto, '88 De Rosa Pro, '89 Pinarello Montello, '94 Burley Duet, 97 Specialized RockHopper, 2010 Langster, Tern Link D8
Mentioned: 73 Post(s)
Tagged: 0 Thread(s)
Quoted: 1607 Post(s)
Liked 2,216 Times
in
1,103 Posts
Andy_K My bench is 37" tall at the surface. I am 5'11" using a Spin Doctor stand. It works well for me in terms of working and position. I typically stand up. Bench is a mess but here is a pic......oops wrong computer.
OK so here it is:
OK so here it is:
__________________
Bikes don't stand alone. They are two tired.
Bikes don't stand alone. They are two tired.
#20
Eccentric Old Man
Join Date: Jan 2014
Location: BelleVegas, IL
Posts: 719
Bikes: 1986 Trek 520 Cirrus, 1979 Schwinn Traveler III, Trek T100, 1995 Trek 970, Fuji America
Mentioned: 31 Post(s)
Tagged: 0 Thread(s)
Quoted: 248 Post(s)
Likes: 0
Liked 173 Times
in
87 Posts
This deserves a thread of it's own! Very nice.
Likes For eom:
#21
señor miembro
Join Date: Dec 2018
Location: Pac NW
Posts: 6,624
Bikes: '70s - '80s Campagnolo
Mentioned: 92 Post(s)
Tagged: 0 Thread(s)
Quoted: 3883 Post(s)
Liked 6,476 Times
in
3,205 Posts
^ Wondering if he has a similar looking tool to mount tires on that rim.
@Lascauxcaveman knows what I'm talkin' 'bout!
@Lascauxcaveman knows what I'm talkin' 'bout!
#22
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
Andy_K My bench is 37" tall at the surface. I am 5'11" using a Spin Doctor stand. It works well for me in terms of working and position. I typically stand up. Bench is a mess but here is a pic......oops wrong computer.
OK so here it is:
OK so here it is:
__________________
My Bikes
My Bikes
#23
Senior Member
Thread Starter
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 14,744
Bikes: Yes
Mentioned: 525 Post(s)
Tagged: 0 Thread(s)
Quoted: 3230 Post(s)
Liked 3,868 Times
in
1,439 Posts
I kind of dismissed this idea at first, but after thinking about it some more, this could really work.Thanks for the suggestion!
__________________
My Bikes
My Bikes
Likes For Andy_K:
#24
Senior Member
For me it's a folding Minoura, usually stored in a closet with my other bike tools. I don't seem to have a need to build more than a wheel or so a year on average. While I'm sure I'm not as quick a wheelbuilder as I once was, it still does not take me long at all. Therefore, no point in having a dedicated workbench set up for it. I do have an all purpose project table for stuff like that. No photos today, cuz it's currently too messy and littered with guitar stuff. For minor truing I'm often lazy and get it good enuff with the brake blocks.
Anyhow, WRT your problem, I tend to go for the simplest solution. How about a taller stool?
Anyhow, WRT your problem, I tend to go for the simplest solution. How about a taller stool?
#25
Sunshine
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 16,610
Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo
Mentioned: 123 Post(s)
Tagged: 0 Thread(s)
Quoted: 10954 Post(s)
Liked 7,483 Times
in
4,185 Posts
First, great rim! Im sold on them, which is why I have a couple wheelsets with Archetype rims and a wheelset with Hydra rims.
I saw this pic and my first thought was 'well thats not an American house'. Not meaning for it to be good or bad, but rather simply an observation for which I lack the words as to why I thought that.
I saw this pic and my first thought was 'well thats not an American house'. Not meaning for it to be good or bad, but rather simply an observation for which I lack the words as to why I thought that.