Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

drivetrain compatibility basics

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

drivetrain compatibility basics

Old 09-05-20, 02:20 PM
  #1  
dunkleosteus
on the wheels of steel
Thread Starter
 
Join Date: Aug 2020
Location: the LBC
Posts: 57

Bikes: yes

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 32 Post(s)
Liked 32 Times in 14 Posts
drivetrain compatibility basics

So here's how I currently understand things, let me know if any of this is wrong, because I'm trying to (over)simplify the veritable profulgence of options here.

1. The number of speeds of a derailleur is an upper limit of the number of speeds it can actually run, like a 10 speed RD would be fine shifting across a 7 speed cassette, and so on.

2. The "number of speeds" of an indexed shifter is the number of clicky clicks in it, that's all. They are not compatible among different numbers of speeds.

3. A friction shifter can run anything.

I'm especially curious about number 3 because I'm thinking of using an old school friction shifter to control a modern 11 speed RD.

Cheers
dunkleosteus is offline  
Old 09-05-20, 02:34 PM
  #2  
rosefarts
With a mighty wind
 
Join Date: May 2015
Posts: 2,555
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
Quoted: 1073 Post(s)
Liked 841 Times in 475 Posts
So I've got a rather uninformative thread going on in Mechanics about some of your questions.

Here is my understanding, at a certain point, Maybe 9 speed and up, there started to be specific derailleur movements corresponding to specific cable pulls (indexing). Below that threshold, the ratios were the same, above that, you need to match systems. There is some mixing and matching that can be done but don't ask me.

As for friction, it can do anything but may be limited to how precise your hands are.
rosefarts is offline  
Old 09-05-20, 02:39 PM
  #3  
bargainguy
Senior Member
 
bargainguy's Avatar
 
Join Date: Sep 2012
Location: Trekland
Posts: 2,282
Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 515 Post(s)
Liked 295 Times in 185 Posts
#3 is fine, #2 is generally good, but #1 needs some tweaking.

All drivetrain systems are originally designed to be run with compatible speed components. So it's assumed you'll be using a 10 speed RD with a 10 speed cluster, shifters and so forth.

You can't take a 10 speed RD and expect it to shift across a 7 speed cluster in indexed mode, the indexing will be off. You can do it in friction mode if the shifter has one, however.
bargainguy is offline  
Old 09-05-20, 03:08 PM
  #4  
lasauge 
Pedalin' Erry Day
 
lasauge's Avatar
 
Join Date: Jun 2011
Location: Newbury Park, CA
Posts: 1,159
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 752 Post(s)
Liked 363 Times in 195 Posts
To your questions from easiest to hardest.

2. Yes, the clicks are the indexed positions built into the shifter and typically they're only compatible with parts from the same manufacturer for the same number of speeds.

3. In theory a friction shifter can work with literally any drivetrain - but in practice there are limitations because your shift lever may not able to pull enough cable to swing the derailer all the way through its range, and with 9 or more speeds the gap between gears may be so small that the shifting will be impractically finicky to use. Note that SRAM rear derailers in particular are not going to play nicely with friction shifters, as they require more cable pull per shift than other brands.

1. Derailers don't just vary according to 'speeds' as there are variations how much chain different derailers can wrap, and the derailer for a system with a given number of 'speeds' will be optimized for a particular set of chains and cassettes. If you wanted to use a 10-sp derailer with a 7-sp freewheel you'd need to use a 10- or 9-speed chain that would be narrow enough to fit through the derailer and this chain might give you some odd shift issues depending on which freewheel you were using, so given how expensive these parts are it would make more sense to use an old derailer and 7-sp chain instead.
lasauge is offline  
Old 09-05-20, 03:46 PM
  #5  
non-fixie 
Shifting is fun!
 
non-fixie's Avatar
 
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,003

Bikes: Yes, please.

Mentioned: 277 Post(s)
Tagged: 0 Thread(s)
Quoted: 2182 Post(s)
Liked 4,526 Times in 1,743 Posts
Originally Posted by dunkleosteus
So here's how I currently understand things, let me know if any of this is wrong, because I'm trying to (over)simplify the veritable profulgence of options here.

1. The number of speeds of a derailleur is an upper limit of the number of speeds it can actually run, like a 10 speed RD would be fine shifting across a 7 speed cassette, and so on.

2. The "number of speeds" of an indexed shifter is the number of clicky clicks in it, that's all. They are not compatible among different numbers of speeds.

3. A friction shifter can run anything.

I'm especially curious about number 3 because I'm thinking of using an old school friction shifter to control a modern 11 speed RD.

Cheers
1. No, actually the upper limit is determined by the amount of travel the RD can handle. As long as it can cover the full width of the rear cluster, you can use it. With a compatible shifter, that is.

2. Yes and no. The number of available clicks is the maximum, but you can use them for fewer speeds. I use 9-speed shifters with 5 and 6-speed rear clusters on some of my touring bikes. The remaining clicks are blocked out by the RD limit screw. As long as the shifter's cable pull matches the RD and cluster combo you are good to go.

3. Yes, but only so far as it can pull a cable. Especially older shifters with a smaller diameter "cable drum" will often reach the 180 degree position before the RD reaches the most inner cogs.
__________________
Are we having fun, or what ...



non-fixie is offline  
Old 09-05-20, 04:26 PM
  #6  
Spaghetti Legs 
Senior Member
 
Join Date: Dec 2014
Location: Central Virginia
Posts: 5,085

Bikes: Numerous

Mentioned: 150 Post(s)
Tagged: 0 Thread(s)
Quoted: 1672 Post(s)
Liked 3,034 Times in 904 Posts
Actually the number of clicks is one less than the drive train speed. An 8 speed shifter, for example, will click seven times. That being said, there are some downtube shifters, without a cable installed, that will click all the way around to the other side of the stop
__________________
N = '96 Colnago C40, '04 Wilier Alpe D'Huez, '10 Colnago EPS, '85 Merckx Pro, '89 Merckx Century, '86 Tommasini Professional, '04 Teschner Aero FX Pro, '05 Alan Carbon Cross, '86 De Rosa Professional, '82 Colnago Super, '95 Gios Compact Pro, '95 Carrera Zeus, '84 Basso Gap, ‘89 Cinelli Supercorsa, ‘83 Bianchi Specialissima, ‘VO Randonneur, Ritchey Breakaway Steel, '84 Paletti Super Prestige, Heron Randonneur

Spaghetti Legs is offline  
Old 09-05-20, 04:38 PM
  #7  
70sSanO
Senior Member
 
70sSanO's Avatar
 
Join Date: Feb 2015
Location: Mission Viejo
Posts: 5,772

Bikes: 1986 Cannondale SR400 (Flat bar commuter), 1988 Cannondale Criterium XTR, 1992 Serotta T-Max, 1995 Trek 970

Mentioned: 20 Post(s)
Tagged: 0 Thread(s)
Quoted: 1935 Post(s)
Liked 2,150 Times in 1,313 Posts
Here are my basics...

1. Every rear derailleur has a shift ratio, which means how much the derailleur will move for the amount of cable the shifter pulls. For the sake of argument, original Shimano SIS would move 1.7mm for every 1mm of cable pull.

2. Every manufacturer has a different shift ratio than the other manufacturers. Campy, Suntour, Shimano all move a different amount for every 1mm of cable pull. There are some other mfg's made their products compatible.

3. As already stated, derailleur have a range (distance) that they can move that will limit how many cogs can be used.

Based on this, the shifter will pull a certain amount of cable. If it is a friction shifter you can manipulate the amount of swing to shift. The only caveat is a possible limit to the overall throw, 180 degrees, the shifter can move; i.e, Simplex Retrofriction.

An index shifter will pull a certain amount of cable, click, to move a compatible derailleur from one cog to another. The derailleur doesn't care as long as the shift ratio is compatible. So a 6 speed shifter shifts 6 and a 7 speed shifter shifts 7, etc.

I haven't been able to re-space a freewheel, but I have re-spaced cassettes to that a 7 speed shifter works with 6 speed cassette, 8 speed shifter with 7 cassette, etc.

There are work-arounds between shifters and derailleurs and cable attach points to hack the system. Here are a couple of sites...

https://www.cyclinguk.org/cyclists-l...gears/shimergo

Science Behind the Magic | Drivetrain Compatibility ? Art's SLO Cyclery

John

Edit Added: If you really want to get knee deep into this, you can measure the actual amount of cable pull to derailleur movement. There are those who have done this and believe the amount is not consistent (identical) from one cog shift to the next. I have never been so inclined, especiually since I used friction shifters for years, to do this. I'd rather just ride and take it for granted.

Last edited by 70sSanO; 09-05-20 at 04:49 PM.
70sSanO is offline  
Old 09-05-20, 04:50 PM
  #8  
canklecat
Me duelen las nalgas
 
canklecat's Avatar
 
Join Date: Aug 2015
Location: Texas
Posts: 13,522

Bikes: Centurion Ironman, Trek 5900, Univega Via Carisma, Globe Carmel

Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Quoted: 4559 Post(s)
Liked 2,798 Times in 1,798 Posts
Originally Posted by dunkleosteus
...I'm especially curious about number 3 because I'm thinking of using an old school friction shifter to control a modern 11 speed RD.
If a friction shifter can pull enough cable it can shift anything. But an 11 speed cassette will have closely spaced cogs and may be a bit finicky to friction shift smoothly.

Having said that, I'm such a cheapskate I'm going to test run a mish-mash of Dura Ace 8-speed and 10-speed components by using a bar-end shifter cannibalized from a time trial bike's aero bars, possibly in friction mode. I haven't decided yet whether I'll like the carbon fiber frame I'm building up -- I won't know whether it fits until I ride it awhile, since it appears to be a 58cm, right on the verge of being too big for me. So rather than commit to buying pricey brifters I'm gonna hodge-podge it together for now.

I'm expecting it to be finicky in friction mode with 10 cogs. I've been running my 7-speed Ironman with friction shifters for a couple of weeks and it's a chore to shift smoothly on chipseal and rough pavement. Some of my favorite rural routes are so torn up it's like riding on bricks or cobbles, and I've blown a lot of shifts with a 7-speed setup and downtube friction shifters.

BTW, Sheldon Brown's site has quickie compatibility charts for Dura Ace components. I dunno if he has another page for all Shimano, Suntour, etc., but it's worth browsing his site to find out.
canklecat is offline  
Old 09-05-20, 10:18 PM
  #9  
dedhed
SE Wis
 
dedhed's Avatar
 
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,516

Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970

Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2731 Post(s)
Liked 3,361 Times in 2,034 Posts
It gets complicated as a number of items determine compatibility.
cog spacing, cable pull of shifter, and ratio of RD movement per length of cable pull. Then you throw in throw distance of RD & shifter, max cog size, and chain wrap capacity of RD.
Then you can throw in a number of different manufacturers and their variations and "special designs" as well.

Their are some "general rules" with lots of exceptions and workarounds.

Science Behind the Magic | Drivetrain Compatibility ? Art's SLO Cyclery
dedhed is offline  
Old 09-06-20, 08:48 AM
  #10  
JohnDThompson 
Old fart
 
JohnDThompson's Avatar
 
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,935

Bikes: Several, mostly not name brands.

Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3571 Post(s)
Liked 3,367 Times in 1,916 Posts
Originally Posted by dunkleosteus
1. The number of speeds of a derailleur is an upper limit of the number of speeds it can actually run, like a 10 speed RD would be fine shifting across a 7 speed cassette, and so on.
Assuming the same cable pull (indexed shifting) or friction shifting. I did run into a problem setting up a Campagnolo Mirage 9-speed derailleur on my wife's 5-sprocket cluster. Even with the lower limit adjuster fully screwed in, it couldn't limit the travel of the derailleur enough to keep it out of the spokes. I had to replace the limit adjuster with a longer bolt to make it work.

2. The "number of speeds" of an indexed shifter is the number of clicky clicks in it, that's all. They are not compatible among different numbers of speeds.
Aside from some serendipitous combinations, anyway.

3. A friction shifter can run anything.
Assuming it can sweep the entire cluster, yes. But the more sprockets you pile onto the rear hub, the more deft your friction shifting must be to reliably hit the gear you want.
JohnDThompson is offline  
Old 09-06-20, 10:01 AM
  #11  
John E
feros ferio
 
John E's Avatar
 
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,765

Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;

Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1384 Post(s)
Liked 1,294 Times in 819 Posts
Sometimes relevant is that lateral float is greater for derailleurs designed for index shifting than for earlier models. You will get a bit more precise shifting in friction mode if you have less lateral float/slop.
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
John E is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.