Just picked up an Austro-Daimler. Where can I learn more about it?
#1
Newbie
Thread Starter
Join Date: Jul 2019
Posts: 2
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Just picked up an Austro-Daimler. Where can I learn more about it?
Hey folks,
New the forums, new to bicycles in general. My wife has been wanting me to get a bike for some time now. Being a freshman to this lifestyle, I hadn't wanted to spend a tremendous amount of money on a bike. I like to know how something works and so I found this neat bike on Craigslist in Virginia.
Guy listed it for $100 but it was in a worse mood than he would have liked in the 10 min he was showing it off. It locked up after I rode it, and I turned him down. He dropped it to $40, and I decided it was worth at least getting something to learn to work on a bicycle with. It needs some work on the brakes, the gears and some sprucing up of the finer details, but the bike seems skookum and was fun to ride for the 3 min I spun it around the block.
I am trying to learn more about AD, but it's tough to find good resources. Is there somewhere I can go to easily find out information about this? Any threads I've missed on these forums? Also, if you know anything about these bikes I would love a quick run down on what I should know, look out for, avoid doing, avoid replacing, etc..
Thanks! I'll post some pictures after I make my 10 replies, I guess.
New the forums, new to bicycles in general. My wife has been wanting me to get a bike for some time now. Being a freshman to this lifestyle, I hadn't wanted to spend a tremendous amount of money on a bike. I like to know how something works and so I found this neat bike on Craigslist in Virginia.
Guy listed it for $100 but it was in a worse mood than he would have liked in the 10 min he was showing it off. It locked up after I rode it, and I turned him down. He dropped it to $40, and I decided it was worth at least getting something to learn to work on a bicycle with. It needs some work on the brakes, the gears and some sprucing up of the finer details, but the bike seems skookum and was fun to ride for the 3 min I spun it around the block.
I am trying to learn more about AD, but it's tough to find good resources. Is there somewhere I can go to easily find out information about this? Any threads I've missed on these forums? Also, if you know anything about these bikes I would love a quick run down on what I should know, look out for, avoid doing, avoid replacing, etc..
Thanks! I'll post some pictures after I make my 10 replies, I guess.
Likes For TR202:
#2
Shifting is fun!
Join Date: Aug 2009
Location: South Holland, NL
Posts: 11,006
Bikes: Yes, please.
Mentioned: 280 Post(s)
Tagged: 0 Thread(s)
Quoted: 2198 Post(s)
Liked 4,600 Times
in
1,764 Posts
Likes For non-fixie:
#3
Newbie
Thread Starter
Join Date: Jul 2019
Posts: 2
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Thanks for the welcome, non-fixie!
It is a basic AD-S. Serial number 6213243. I had a chance to poke around it a bit today and took some decent photos but still cannot figure out how to upload them to the gallery. I have just uploaded a few to my personal instagram, and my handle is russbowlesmiller if you'd like to check them out there for now.
Once I get permissions I will start posting better, more informative photos of the various parts and serials from them. It seems to be largely original, with a few contemporary aftermarket parts parsed through.
It is a basic AD-S. Serial number 6213243. I had a chance to poke around it a bit today and took some decent photos but still cannot figure out how to upload them to the gallery. I have just uploaded a few to my personal instagram, and my handle is russbowlesmiller if you'd like to check them out there for now.
Once I get permissions I will start posting better, more informative photos of the various parts and serials from them. It seems to be largely original, with a few contemporary aftermarket parts parsed through.
#5
Full Member
I had an AD-SL in high school, the bicycle was circa 1980 when their marketing changed the all European tag so all the component groups were mixed French on the low end and Campagnolo on the high end, although my frame had Shimano dropouts. The main differences from an AD-S were Reynolds 531 main tubes and higgher grade Huret derailleurs (think Austrian Super Course). There were also several higher end models with full Reynolds frames and higher end French and Italian parts.
Austro-Daimler was part of Steyr Daimler Puch which at that point also made Puch bicycles and Mopeds, Puch Pinzgauer off road vehicles, Mercedes G-wagens under contract, Steyr heavy trucks and Steyr guns, plus they used to license build Fiat 500s.
The bicycles and mopeds faded from the US market in the late 80s and the conglomerate started to break up a few years later.
As an aside the US Army's LMTV trucks use the cab from Steyr's last independent truck design before they were swallowed up by MAN and Steyr used to build Chrysler minivans for the European market.
Austro-Daimler was part of Steyr Daimler Puch which at that point also made Puch bicycles and Mopeds, Puch Pinzgauer off road vehicles, Mercedes G-wagens under contract, Steyr heavy trucks and Steyr guns, plus they used to license build Fiat 500s.
The bicycles and mopeds faded from the US market in the late 80s and the conglomerate started to break up a few years later.
As an aside the US Army's LMTV trucks use the cab from Steyr's last independent truck design before they were swallowed up by MAN and Steyr used to build Chrysler minivans for the European market.
#6
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,858
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2930 Post(s)
Liked 2,923 Times
in
1,491 Posts
Welcome to the forums. Nice looking bike.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
#7
feros ferio
Join Date: Jul 2000
Location: www.ci.encinitas.ca.us
Posts: 21,796
Bikes: 1959 Capo Modell Campagnolo; 1960 Capo Sieger (2); 1962 Carlton Franco Suisse; 1970 Peugeot UO-8; 1982 Bianchi Campione d'Italia; 1988 Schwinn Project KOM-10;
Mentioned: 44 Post(s)
Tagged: 0 Thread(s)
Quoted: 1392 Post(s)
Liked 1,324 Times
in
836 Posts
Of course it's a nice bike -- it's Austrian. (My three come from the other end of the country, Vienna.)
__________________
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
"Far and away the best prize that life offers is the chance to work hard at work worth doing." --Theodore Roosevelt
Capo: 1959 Modell Campagnolo, S/N 40324; 1960 Sieger (2), S/N 42624, 42597
Carlton: 1962 Franco Suisse, S/N K7911
Peugeot: 1970 UO-8, S/N 0010468
Bianchi: 1982 Campione d'Italia, S/N 1.M9914
Schwinn: 1988 Project KOM-10, S/N F804069
#8
Veteran, Pacifist
Join Date: Dec 2004
Location: Seattle area
Posts: 13,328
Bikes: Bikes??? Thought this was social media?!?
Mentioned: 284 Post(s)
Tagged: 0 Thread(s)
Quoted: 3898 Post(s)
Liked 4,832 Times
in
2,229 Posts
Yes - Welcome to BF. Nice bike. I'm a Fan of the Brand.
Here's the serial number database thread:
https://www.bikeforums.net/classic-v...-database.html
Lightweight Classic Vintage bicycles has a 'Registry' serial number database on the AD page.
Here's the serial number database thread:
https://www.bikeforums.net/classic-v...-database.html
Lightweight Classic Vintage bicycles has a 'Registry' serial number database on the AD page.
__________________
Vintage, modern, e-road. It is a big cycling universe.
Vintage, modern, e-road. It is a big cycling universe.
#9
Extraordinary Magnitude
Join Date: Aug 2009
Location: Waukesha WI
Posts: 13,646
Bikes: 1978 Trek TX700; 1978/79 Trek 736; 1984 Specialized Stumpjumper Sport; 1984 Schwinn Voyageur SP; 1985 Trek 620; 1985 Trek 720; 1986 Trek 400 Elance; 1987 Schwinn High Sierra; 1990 Miyata 1000LT
Mentioned: 84 Post(s)
Tagged: 0 Thread(s)
Quoted: 2608 Post(s)
Liked 1,699 Times
in
935 Posts
That's a nice looking bike!
__________________
*Recipient of the 2006 Time Magazine "Person Of The Year" Award*
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
Commence to jigglin’ huh?!?!
"But hey, always love to hear from opinionated amateurs." -says some guy to Mr. Marshall.
#10
Some Weirdo
Join Date: Dec 2017
Location: Rexburg, ID
Posts: 502
Bikes: '86 Schwinn Prelude, '91 Scott Sawtooth, '73 Raleigh "Grand 3"
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 223 Post(s)
Liked 141 Times
in
92 Posts
The nicer '70s models are some of my favourite from the era. The only problem is that my parts bins are more focused on the mid '80s and beyond.