Mirrors for road bikes with drop handlebars end cap or helmet mounted
#1
Senior Member
Thread Starter
Mirrors for road bikes with drop handlebars end cap or helmet mounted
Hello, this must have been brought up before so my apologies. I wanted to know what the thoughts are out there for a side view mirror for a road bike with drop handlebars? The only options I see are a mirror mounted inside the bar where the tape cap goes or a helmet mounted mirror.
I have not tried either but I wanted to get some opinions.
Thanks
I have not tried either but I wanted to get some opinions.
Thanks
#2
Junior Member
Join Date: Mar 2016
Posts: 79
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 18 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hello, this must have been brought up before so my apologies. I wanted to know what the thoughts are out there for a side view mirror for a road bike with drop handlebars? The only options I see are a mirror mounted inside the bar where the tape cap goes or a helmet mounted mirror.
I have not tried either but I wanted to get some opinions.
Thanks
I have not tried either but I wanted to get some opinions.
Thanks
#3
Senior Member
Join Date: Jun 2013
Location: Bozeman
Posts: 4,094
Bikes: 199? Landshark Roadshark, 198? Mondonico Diamond, 1987 Panasonic DX-5000, 1987 Bianchi Limited, Univega... Chrome..., 1989 Schwinn Woodlands, Motobecane USA Record, Raleigh Tokul 2
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1131 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Hello, this must have been brought up before so my apologies. I wanted to know what the thoughts are out there for a side view mirror for a road bike with drop handlebars? The only options I see are a mirror mounted inside the bar where the tape cap goes or a helmet mounted mirror.
I have not tried either but I wanted to get some opinions.
Thanks
I have not tried either but I wanted to get some opinions.
Thanks
Bar end mounted mirror style 1.
Bar end mounted mirror style 2.
I have personally tried the bar end mounted mirror style 1. Perhaps I just had a crappy one, but it was terrible. Too much vibration to see anything more than "oh there is an object anywhere between 10 and 100 feet behind me." I took it off 2 days after installing it. Also, my arm blocked it when I was riding in the drops and partially blocked it when riding in the hoods.
#6
Senior Member
Join Date: Jun 2013
Location: Bozeman
Posts: 4,094
Bikes: 199? Landshark Roadshark, 198? Mondonico Diamond, 1987 Panasonic DX-5000, 1987 Bianchi Limited, Univega... Chrome..., 1989 Schwinn Woodlands, Motobecane USA Record, Raleigh Tokul 2
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 1131 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
The price to pay for safety is high!!
I'd think your arm positioning would change too much to make something like that useful. Unless you're one of those people who never move on the bike and stay on top of the hoods for dozens of miles at a time.
I'd think your arm positioning would change too much to make something like that useful. Unless you're one of those people who never move on the bike and stay on top of the hoods for dozens of miles at a time.
#8
Senior Member
Join Date: Dec 2003
Location: Tucson, AZ
Posts: 11,016
Bikes: Custom Zona c/f tandem + Scott Plasma single
Mentioned: 3 Post(s)
Tagged: 1 Thread(s)
Quoted: 77 Post(s)
Likes: 0
Liked 19 Times
in
11 Posts
Agree on the Take-A-Look cycling mirror that mounts on eyeglass temple.
Made in the USA (Colorado) by disabled folks.
Been riiding since the early 70s and this is hands down the best cycling mirror I've ever used.
Great product, great price, easy to use.
Made in the USA (Colorado) by disabled folks.
Been riiding since the early 70s and this is hands down the best cycling mirror I've ever used.
Great product, great price, easy to use.
#10
Senior Member
Join Date: Apr 2006
Location: Gig Harbor, WA
Posts: 2,470
Bikes: Surly Long Haul Trucker, Gary Fisher Hoo Koo E Koo, Dahon Mu P 24 , Ritchey Breakaway Cross, Rodriguez Tandem, Wheeler MTB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 32 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Safe Zone helmet mirror is my choice . I've used one for quite awhile. A bit expensive but IMO worth the cost. Customer service has been very good as well .
#11
Senior Member
Join Date: Jun 2011
Location: Tampa, Florida
Posts: 5,585
Bikes: 2017 Colnago C-RS, 2012 Colnago Ace, 2010 Giant Cypress hybrid
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 408 Post(s)
Liked 122 Times
in
85 Posts
I tried several types of mirrors including helmet and eyeglass mounted mirrors. The Mirrcycle brifter mount was nice except that it's only made for certain, older Shimano models. It doesn't work on the newer design brifters. Helmet and eyeglass mounts were nice and gave a good view of things as long as you were sitting in the position that they were adjusted for. The second you changed position (going to the drops or an aerobar), you had to readjust them or you couldn't see anything behind you. I settled for a bar end mirror because they are much easier to adjust at any position you ride in, including riding on an aerobar. I like the ball and socket style over the others because it's much easier to adjust and you don't need any tools to install or adjust it.
__________________
HCFR Cycling Team
Ride Safe ... Ride Hard ... Ride Daily
2017 Colnago C-RS
2012 Colnago Ace
2010 Giant Cypress
HCFR Cycling Team
Ride Safe ... Ride Hard ... Ride Daily
2017 Colnago C-RS
2012 Colnago Ace
2010 Giant Cypress
#12
Senior Member
Join Date: May 2016
Location: Milwaukee, WI
Posts: 59
Bikes: Felt V85
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 17 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Interesting thread, I was wondering the same thing myself. I have a newer shifter so I can't use the shifter mirror that I had ordered. UGH! I am hoping to give it to someone who might want it.
My boyfriend used the helmet mounted one for a while but he said it was a pain to adjust and keep in place, and just in general he hated it.
He ordered a Selle Italia Eyelink mirror to try on my newer shifters. We'll see, reviews are mixed on amazon.
My boyfriend used the helmet mounted one for a while but he said it was a pain to adjust and keep in place, and just in general he hated it.
He ordered a Selle Italia Eyelink mirror to try on my newer shifters. We'll see, reviews are mixed on amazon.
#13
Senior Member
Join Date: Jan 2005
Location: LF, APMAT
Posts: 2,752
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 623 Post(s)
Likes: 0
Liked 397 Times
in
226 Posts
I have the bar end type pictured above. It is good enough to see behind (obviously I turn my head if I'm going to change directions anyways). I've tried a brifter and hood mounted mirror and they always seemed to get in the way.
#14
Don't make me sing!
Join Date: Aug 2012
Location: Western PA
Posts: 1,022
Bikes: 2013 Specialized Crosstrail Elite, 1986 Centurion Elite RS, Diamondback hardtail MTB, '70s Fuji Special Road Racer, 2012 Raleigh Revenio 2.0, 1992 Trek 1000
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 308 Post(s)
Liked 0 Times
in
0 Posts
I use these:
Heads Up!?: The Eyewear Mounted Mirror CycleAware Heads Up! The Adjustable Mirror for Glasses [01-5000BLK] - $15.00 : CycleAware, smart & simple safety
Light, cheap, and excellent view. I use very small zip ties to attach them to inexpensive glasses for different purposes (low light, polycarbonate lens safety glasses for off-road, etc).
I once sent them an email because the little tab in the middle broke off, and I wanted to see if they could sell me a few replacements. Instead, they sent me a handful of the stems, for free. You want a customer for life? That's how you get a customer for life!
I don't like helmet mirrors because I don't always wear a helmet, and the mirror makes it hard to pack the helmet without either damaging the mirror, or, worse, the helmet.
I like the metal version posted by Kermie. Probably last forever, and easily adapted to any eyewear. Made in U-S-A is cool, too!
Heads Up!?: The Eyewear Mounted Mirror CycleAware Heads Up! The Adjustable Mirror for Glasses [01-5000BLK] - $15.00 : CycleAware, smart & simple safety
Light, cheap, and excellent view. I use very small zip ties to attach them to inexpensive glasses for different purposes (low light, polycarbonate lens safety glasses for off-road, etc).
I once sent them an email because the little tab in the middle broke off, and I wanted to see if they could sell me a few replacements. Instead, they sent me a handful of the stems, for free. You want a customer for life? That's how you get a customer for life!
I don't like helmet mirrors because I don't always wear a helmet, and the mirror makes it hard to pack the helmet without either damaging the mirror, or, worse, the helmet.
I like the metal version posted by Kermie. Probably last forever, and easily adapted to any eyewear. Made in U-S-A is cool, too!
#15
Senior Member
Join Date: Jan 2009
Location: Colorado Springs, CO
Posts: 5,968
Bikes: 2015 Charge Plug, 2007 Dahon Boardwalk, 1997 Nishiki Blazer, 1984 Nishiki International, 2006 Felt F65, 1989 Dahon Getaway V
Mentioned: 54 Post(s)
Tagged: 0 Thread(s)
Quoted: 1362 Post(s)
Liked 1,672 Times
in
827 Posts
I've been using a take-a-look glasses mounted mirror for years, but also keep a mirror on the handlebar. I agree the take-a-look is superior regarding vibration (none) and field of view (you can sweep your head from side to side). I like the handlebar mirror as a back-up and sometimes, but not often, I will notice a vehicle first in the handlebar mirror.
#16
Senior Member
Join Date: Nov 2015
Location: Houston
Posts: 540
Bikes: Novarra Randonee 2016, Trek Verve 2 2015
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 97 Post(s)
Likes: 0
Liked 3 Times
in
3 Posts
I went through every gyration possible with mirrors...
A B&M handlebar mounted with a long shaft works well with my flatbar hybrid. The Randonee has barcons so all the bar-end solution go out of the window. Pretty much any steering bar solution is out of the window...
I tried a B&M with a short shaft mounted right next to the barcon. I can see the mirror when I have my hand on the hood but not when I have my hand on the bar, as my forearm is in the way...
I tried the take-a-look, but it is the wrong alignment. I need to move the mirror outwards and it will not do this. A pair of pliers may introduce a permanent bend, or an early demise...
I tried a glue on the helmet mirror which worked very well, but in hot and humid Texas, the glue gave up the spirit early.
I tied the glue-on base of the mirror on the helmet with thin electrical ties.
It wurked!
A B&M handlebar mounted with a long shaft works well with my flatbar hybrid. The Randonee has barcons so all the bar-end solution go out of the window. Pretty much any steering bar solution is out of the window...
I tried a B&M with a short shaft mounted right next to the barcon. I can see the mirror when I have my hand on the hood but not when I have my hand on the bar, as my forearm is in the way...
I tried the take-a-look, but it is the wrong alignment. I need to move the mirror outwards and it will not do this. A pair of pliers may introduce a permanent bend, or an early demise...
I tried a glue on the helmet mirror which worked very well, but in hot and humid Texas, the glue gave up the spirit early.
I tied the glue-on base of the mirror on the helmet with thin electrical ties.
It wurked!
#17
Senior Member
I've got a Selle Italia Eyelink They're pretty pricey, but I happened to have found mine on ebay for $30. It works really well, folds out of the way from transport and has the extra added benefit of your being able to adjust it slightly while your hand is on the hood to see a different angle behind you. (Useful if the road behind looks empty, and you're about to cross lanes for a left-hand turn...but you somehow know it's not. Old necks don't turn so well, you know.)
I recommend it highly, except for the price!
I recommend it highly, except for the price!
#18
Senior Member
Join Date: Sep 2012
Location: Back-of-beyond, Kootenays, BC
Posts: 746
Bikes: Specialized Roubaix Exp ert Road and Specialized Stump Jumper FS Mountain; De Vinci Caribou touring, Intense Tracer T275c, Cramerotti, Specialized Allez, Condor
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 164 Post(s)
Liked 92 Times
in
56 Posts
Best I ever had was a mirrorcycle mounted on the grifters. But as noted, they don't fit many of the new bikes. I currently use bar end mirrors. They give a truely crappy view of what's behind you but it is something. Tried helmet mirrors. Found them distracting to the extent they nearly made me crash. Suddenly seeing a vehicle, apparently right beside your head, just threw me off. Recently I saw a variety of mirrors in Japan. Several were almost like motor cycle mirrors! I didn't try any of them..... and they would look totally Fred! But might do the job best.
#19
Member
Join Date: Apr 2016
Posts: 42
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
#20
Life is good
Join Date: Jan 2001
Location: Not far from the Withlacoochee Trail. 🚴🏻
Posts: 18,209
Bikes: 2018 Lynskey Helix Pro
Mentioned: 13 Post(s)
Tagged: 0 Thread(s)
Quoted: 522 Post(s)
Likes: 0
Liked 10 Times
in
10 Posts
I've been using helmet mounted mirrors since early 2000s and never had any problems.
__________________
The Lord is merciful and gracious, slow to anger and abounding in steadfast love. - Psalm 103:8
I am a cyclist. I am not the fastest or the fittest. But I will get to where I'm going with a smile on my face.
The Lord is merciful and gracious, slow to anger and abounding in steadfast love. - Psalm 103:8
I am a cyclist. I am not the fastest or the fittest. But I will get to where I'm going with a smile on my face.
#21
Senior Member
Join Date: Jul 2012
Location: Farmington Hills, Mi
Posts: 297
Bikes: 1996 Specialized Hardrock Sport FS, 2011 Fuji Newest 1.0, 2015 GRC-Single Gecko, 2016 Waterford RS-22
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 24 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I'm a helmet mounted kind of guy. Bar mounted never let me look around and shook too much. Now, I know some people who prefer bar mounted, but sadly they are wrong.
#22
Senior Member
Join Date: Jun 2014
Location: Ontario, Canada
Posts: 4,624
Bikes: iele Latina, Miele Suprema, Miele Uno LS, Miele Miele Beta, MMTB, Bianchi Model Unknown, Fiori Venezia, Fiori Napoli, VeloSport Adamas AX
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 1324 Post(s)
Liked 927 Times
in
640 Posts
Having tried bar end mirrors and eyeglass or helmet mounted mirrors I far prefer the eyeglass or helmet mounted ones. One reason is that you don't have to glance down to see the mirror. Anothe reson is that most of them give you a real world view and where objects in the mirror are where they are on the road and not distorted by wide-angle lenses. For fun once I took a ride with both my helmet mounted mirror and my handlebar mounted mirror (road bike) and I had trouble seeing a lot of vehicles in the wide angle handlebar mounted mirror but those same objects were plainly visible in the helmet mounted mirror. Yet another thing I like about eyeglass or helmet mounted mirrors is, as another poster mentioned, is the ability to scan by turning the head. This is very beneficial when riding around corners or curves in the road as you can still see what's BEHIND you instead of a nice view of a field or sidewalk.
Cheers
Cheers
#23
Ozark Hillbilly
Join Date: Jul 2015
Location: Show Me State
Posts: 680
Bikes: Long Haul Trucker
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 136 Post(s)
Likes: 0
Liked 2 Times
in
2 Posts
Ortlieb Bike Mirror (I don't use that position so the mirror is not in the way):
https://ortliebusa.com/product/bike-mirror-10/
https://ortliebusa.com/product/bike-mirror-10/
Last edited by jonc123; 07-12-16 at 05:16 PM.
#24
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,626
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3870 Post(s)
Liked 2,563 Times
in
1,577 Posts
My fixed-gear has one of those bar-end ones mounted on it, so when I ride that bike I have two options -- the other being the Flatlander's mirror on my helmet.
#25
Join Date: Oct 2015
Location: NoVA - DC Metro
Posts: 1,037
Bikes: 1987 Schwinn Prelude
Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 296 Post(s)
Likes: 0
Liked 8 Times
in
5 Posts
I use the cat eye mirror that goes into the bar end. I love it. It doesnt shake and you can see really far behind you quite well. Its fully adjustable - can be set at any angle, up or down, and back or forth. Easy to nudge it up or down if changing positions, but usually i can see well in either position. I could also use it on my mtb's flat bars. I looked at others but nothing else interested me really.
https://www.amazon.com/CatEye-Road-B...ad+bike+mirrow
If you set it out to the side, instead of straight under the bar, you can see more plus it wont get blocked by an arm.
https://www.amazon.com/CatEye-Road-B...ad+bike+mirrow
If you set it out to the side, instead of straight under the bar, you can see more plus it wont get blocked by an arm.
Last edited by Hardrock23; 07-12-16 at 11:06 PM.