Derailleur hanger
01-13-11, 01:30 AM
#1
Junior Member
Thread Starter
Join Date: Sep 2010
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
Derailleur hanger
I have a 1980's low-end Mondia without a derailleur hanger. I would like to know if there is a way to add a derailleur hanger so that I can use more modern derailleurs. I plan to change the gearing so I have to change from a short cage derailleur to a long cage one. Without a derailleur hanger the only derailleurs I can use are Shimano Tourney, which I would like to avoid. Can I weld a derailleur hanger to the frame, or the heat would weaken the steel?
01-13-11, 04:11 AM
#2
Junior Member
Thread Starter
Join Date: Sep 2010
Posts: 8
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
After some more searching I have found the answer. A derailleur claw https://www.sheldonbrown.com/gloss_aa-l.html#adaptor
01-13-11, 05:38 AM
#3
Senior Member
Join Date: Aug 2010
Location: Greenfield, IN
Posts: 53
Bikes: 2011 Raleigh Revenio 3.0, 1986 Centurion Accodo RS
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
I think this is what you are looking for. https://www.niagaracycle.com/product_...oducts_id=5148
Thread
Thread Starter
Forum
Replies
Last Post
saturnhr
Bicycle Mechanics
5
08-16-12 08:17 PM
jyl
Classic & Vintage
13
03-05-12 12:41 PM
