Go Back  Bike Forums > Bike Forums > Bicycle Mechanics
Reload this Page >

Help with bar tape - end plug hell

Notices
Bicycle Mechanics Broken bottom bracket? Tacoed wheel? If you're having problems with your bicycle, or just need help fixing a flat, drop in here for the latest on bicycle mechanics & bicycle maintenance.

Help with bar tape - end plug hell

Old 01-26-21, 05:22 AM
  #1  
SapInMyBlood
Enthusiastic Sufferer
Thread Starter
 
SapInMyBlood's Avatar
 
Join Date: Nov 2017
Location: Perth, Australia
Posts: 62

Bikes: 2015 Specialized Roubaix, 2014 Salsa Fargo, 2013 Trek Remedy, 2014 Cannondale Synapse

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 32 Post(s)
Liked 23 Times in 18 Posts
Help with bar tape - end plug hell

Like a lot of you, I try to do my own home brew maintenance and try to do my best.

I'm failing miserably.

How do you get the bartape to sit nicely within the bar plug? I keep getting an ugly tab that sticks out..


SapInMyBlood is offline  
Old 01-26-21, 07:06 AM
  #2  
Phil_gretz
Journeyman Bike Commuter
 
Phil_gretz's Avatar
 
Join Date: Aug 2009
Location: Alexandria, VA
Posts: 6,341

Bikes: '71 Jeunet 640, '79 Peugeot PXN10LE, '88 Fuji Saratoga, '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '16 Motobecane Gran Premio Elite, '18 Velobuild VB-R-022

Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 1180 Post(s)
Liked 947 Times in 521 Posts
^ this. I actually trim an angled piece from the beginning end, so that the first wrap starts at ~5/16" and gets wider for about 3" until it is full width. That way, there's no thickness resulting from the initial turn around the bar end. The plug fits flush against the trimmed edge of the tape.
Phil_gretz is offline  
Likes For Phil_gretz:
Old 01-26-21, 09:09 AM
  #3  
Iride01
Hits [ENTER] b4 thinking
 
Iride01's Avatar
 
Join Date: Jul 2017
Location: Mississippi
Posts: 5,699

Bikes: '20 Tarmac Disc Comp '91 Schwinn Paramount '78 Raleigh Competition GS

Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 2213 Post(s)
Liked 947 Times in 710 Posts
I hadn't wrapped a bar in twenty years so and If you don't do it often you lose your skill for doing it well and the little do's and don't you learn with experience. This video gave some good thoughts and considerations when I needed to wrap the bars for my Paramount back circa 2016, this was the most helpful vid for me.

https://www.parktool.com/blog/repair...tion-drop-bars

Little long, sometimes he goes off on tangents I don't care about, but in general the most all around informative at the time that I found. The wrap I put on my Paramount back then still looks good.
Iride01 is offline  
Old 01-26-21, 09:16 AM
  #4  
tkamd73 
Senior Member
 
Join Date: Dec 2015
Location: Menomonee Falls, WI
Posts: 997

Bikes: 1984 Schwinn Supersport, 1988 Trek 400t, 1977 Trek TX900, 1983 Bianchi Champione del Mondo, 1986 Trek 400 Elance, 1978 Raleigh Supercourse, 1991 PDG Paramount OS, 1971 Schwinn Sports Tourer, 1985 Trek 670

Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 332 Post(s)
Liked 280 Times in 179 Posts
I find the best tool is a large rubber mallet, sometimes it takes a few tries, just stuff the excess into the bar, if it’s a lot, I’ll trim it a bit.
Better quality plugs help too, I throw away, the ones that come with the tape, I use the Cinelli ones, but others work well too.
Both pics are 3mm padded tape installations.
Tim




Last edited by tkamd73; 02-10-21 at 09:14 PM.
tkamd73 is offline  
Likes For tkamd73:
Old 01-26-21, 09:24 AM
  #5  
mack_turtle
n00b
 
Join Date: Jan 2008
Location: Austin, TX
Posts: 1,397

Bikes: Surly Karate Monkey, Twin Six Standard Rando

Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 422 Post(s)
Liked 449 Times in 270 Posts
I start at the end of the bar, cutting the end of the tape at an angle. wrap so the edge of the tape is flush with the end of the bar, no tucking needed. I use aluminum plugs with an expanding wedge instead of the press-in plastic bits.
mack_turtle is offline  
Likes For mack_turtle:
Old 01-26-21, 12:21 PM
  #6  
'02 nrs
royaloaker
 
'02 nrs's Avatar
 
Join Date: Jan 2010
Location: se MIch.
Posts: 409

Bikes: 1938 claud butler,1983 Basso,teledyne titan,teocali super,nrs,1993 stumpjumper fsr,Paramountain,Paramount Buell,4 banger,Zaskar LE,Colnago Master Ibex MTB,1987ish,.etc....

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 141 Post(s)
Liked 165 Times in 96 Posts
wrap/

tried more overhang material? maybe 1/4" more will solve the issue then bring out the rubber mallet.
'02 nrs is offline  
Old 01-26-21, 12:28 PM
  #7  
ClydeClydeson
Senior Member
 
Join Date: Mar 2019
Posts: 426
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 137 Post(s)
Liked 151 Times in 111 Posts
I do at least one full wrap with the tape half overhanging the end of the bar. This gives me more tape to tuck inside the bar, and I can tuck all the way around.
ClydeClydeson is offline  
Likes For ClydeClydeson:
Old 01-26-21, 02:26 PM
  #8  
Koyote
Senior Member
 
Join Date: Sep 2017
Posts: 3,086
Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 2224 Post(s)
Liked 2,871 Times in 1,290 Posts
Originally Posted by shelbyfv View Post
With thicker bar tape, I prefer to wrap it flush with the end rather than try to tuck it. The lip on the cap covers the bare end of the bar. All nice and tidy, no unsightly bulge.
Originally Posted by Phil_gretz View Post
^ this. I actually trim an angled piece from the beginning end, so that the first wrap starts at ~5/16" and gets wider for about 3" until it is full width. That way, there's no thickness resulting from the initial turn around the bar end. The plug fits flush against the trimmed edge of the tape.
I'm trying to envision this. Do you need to use a small piece of adhesive tape to attach the end to the bar? Or do you just run the first wrap tightly around itself?
Koyote is offline  
Old 01-26-21, 02:43 PM
  #9  
Litespud
Senior Member
 
Join Date: Oct 2017
Location: Chapel Hill NC
Posts: 1,189

Bikes: 2000 Litespeed Vortex Chorus 10, 1995 DeBernardi Cromor S/S, Nashbar 3sp commuter

Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
Quoted: 447 Post(s)
Liked 439 Times in 248 Posts
Originally Posted by SapInMyBlood View Post
Like a lot of you, I try to do my own home brew maintenance and try to do my best.

I'm failing miserably.

How do you get the bartape to sit nicely within the bar plug? I keep getting an ugly tab that sticks out..


I start the wrap with a little overlap and then use a blade to trim it flush with the bar end. Way cleaner and no trying to stuff bar tape into the hole.
Litespud is offline  
Likes For Litespud:
Old 01-26-21, 02:44 PM
  #10  
Unca_Sam
The dropped
 
Unca_Sam's Avatar
 
Join Date: Oct 2018
Location: Columbus, OH
Posts: 1,889

Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1966 Schwinn Deluxe Racer, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 1395 Post(s)
Liked 690 Times in 484 Posts
Originally Posted by Koyote View Post
I'm trying to envision this. Do you need to use a small piece of adhesive tape to attach the end to the bar? Or do you just run the first wrap tightly around itself?
Since you can't stuff the tape in when using bar ends, I do it this way and try to get that first wrap really tight on the inside of the bar, past the cable housing. It's come loose on me anywhere else.
Unca_Sam is offline  
Old 01-26-21, 02:51 PM
  #11  
Phil_gretz
Journeyman Bike Commuter
 
Phil_gretz's Avatar
 
Join Date: Aug 2009
Location: Alexandria, VA
Posts: 6,341

Bikes: '71 Jeunet 640, '79 Peugeot PXN10LE, '88 Fuji Saratoga, '13 Motobecane Fantom29 HT, '16 Motobecane Turino Pro Disc, '16 Motobecane Gran Premio Elite, '18 Velobuild VB-R-022

Mentioned: 19 Post(s)
Tagged: 0 Thread(s)
Quoted: 1180 Post(s)
Liked 947 Times in 521 Posts
Originally Posted by Koyote View Post
I'm trying to envision this. Do you need to use a small piece of adhesive tape to attach the end to the bar? Or do you just run the first wrap tightly around itself?
No. I hold the thinnest end of the taper at about the 6:00 position beneath the bar end, and then begin wrapping over the outside and then inboard, with the standard overlap. If the taper was trimmed correctly, this gives an even overlap without bunching at the bar end. It sounds more complicated than it really is. I wish that I had taken photos. I've done this a hundred times or more...
Phil_gretz is offline  
Old 01-26-21, 04:18 PM
  #12  
davidad
Senior Member
 
Join Date: Feb 2009
Posts: 6,417
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 490 Post(s)
Likes: 0
Liked 100 Times in 88 Posts
I use carpet tape to hold the end until the bar is wrapped. I then cut it square and use this type of plug. Problem solved.

Amazon.com : Domain Cycling Aluminum Bike Handlebar Bar End Plugs, Expanding Adjustable Locking Caps, Road Bicycle Grip Mountain BMX MTB Fixie (Black) : Sports & Outdoors
davidad is offline  
Old 01-26-21, 04:28 PM
  #13  
cxwrench
Senior Member
 
cxwrench's Avatar
 
Join Date: Jul 2013
Location: Nor-Cal
Posts: 1,150

Bikes: lots

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 473 Post(s)
Liked 506 Times in 294 Posts
Originally Posted by davidad View Post
I use carpet tape to hold the end until the bar is wrapped. I then cut it square and use this type of plug. Problem solved.

Amazon.com : Domain Cycling Aluminum Bike Handlebar Bar End Plugs, Expanding Adjustable Locking Caps, Road Bicycle Grip Mountain BMX MTB Fixie (Black) : Sports & Outdoors
Are you wrapping backwards...I mean from the top down to the drops?
cxwrench is offline  
Old 01-26-21, 04:39 PM
  #14  
davidad
Senior Member
 
Join Date: Feb 2009
Posts: 6,417
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 490 Post(s)
Likes: 0
Liked 100 Times in 88 Posts
Originally Posted by cxwrench View Post
Are you wrapping backwards...I mean from the top down to the drops?
I wrap from the bottom up as per the Park method.
davidad is offline  
Old 01-26-21, 04:55 PM
  #15  
cxwrench
Senior Member
 
cxwrench's Avatar
 
Join Date: Jul 2013
Location: Nor-Cal
Posts: 1,150

Bikes: lots

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 473 Post(s)
Liked 506 Times in 294 Posts
Originally Posted by davidad View Post
I wrap from the bottom up as per the Park method.
What do you need the tape for then?
cxwrench is offline  
Old 01-26-21, 05:35 PM
  #16  
xiaoman1 
Awaiting Parole
 
xiaoman1's Avatar
 
Join Date: Mar 2014
Location: Weird Coast City of the Angels
Posts: 3,761

Bikes: A few too many

Mentioned: 33 Post(s)
Tagged: 1 Thread(s)
Quoted: 843 Post(s)
Liked 661 Times in 459 Posts
Originally Posted by '02 nrs View Post
tried more overhang material? maybe 1/4" more will solve the issue then bring out the rubber mallet.
+1, and quite obvious that the tape was/is too short, I have never seen the need to cut the tape and the plug end.
DWYWTD
Ben
__________________
"STAND UP FOR WHAT IS RIGHT EVEN IF YOU ARE THE ONLY ONE STANDING"

xiaoman1 is offline  
Old 01-26-21, 06:00 PM
  #17  
davidad
Senior Member
 
Join Date: Feb 2009
Posts: 6,417
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 490 Post(s)
Likes: 0
Liked 100 Times in 88 Posts
Originally Posted by cxwrench View Post
What do you need the tape for then?
It holds the handle bar tape in place until I am finished. I then cut the excess flush with the bar end and install the plugs. I don't have fancy ones I use old fashion rubber ones.
Similar to these. Handlebar Plugs - Nitto, Silver Rivendell Bicycle Works (rivbike.com)
davidad is offline  
Old 01-26-21, 06:48 PM
  #18  
cxwrench
Senior Member
 
cxwrench's Avatar
 
Join Date: Jul 2013
Location: Nor-Cal
Posts: 1,150

Bikes: lots

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 473 Post(s)
Liked 506 Times in 294 Posts
Originally Posted by davidad View Post
It holds the handle bar tape in place until I am finished. I then cut the excess flush with the bar end and install the plugs. I don't have fancy ones I use old fashion rubber ones.
Similar to these. Handlebar Plugs - Nitto, Silver Rivendell Bicycle Works (rivbike.com)
I still don't see the need for any tape. I cut the taper across the tape so the 'finished' (non cut) edge is at the end of the bar, it looks way better this way. As soon as you start wrapping the tape holds itself, so no tape. Been doing it like this for over 20 years. I can't see how cutting the tape after wrapping looks good at all.
cxwrench is offline  
Old 01-26-21, 09:33 PM
  #19  
Russ Roth
Senior Member
 
Join Date: Dec 2019
Location: South Shore of Long Island
Posts: 1,403

Bikes: 2010 Carrera Volans, 2015 C-Dale Trail 2sl, 2017 Raleigh Rush Hour, 2017 Blue Proseccio, 1992 Giant Perigee, 80s Gitane Rallye Tandem

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 512 Post(s)
Liked 359 Times in 279 Posts
Originally Posted by Koyote View Post
I'm trying to envision this. Do you need to use a small piece of adhesive tape to attach the end to the bar? Or do you just run the first wrap tightly around itself?
Never bothered cutting a taper in the tape to start, just hold the end at 6 o'clock and wrap from there which does result in a small bulge but I like having it at the end and envision it being useful should my hand slip back even though that's never happened. Taping down the start isn't something I've ever needed to do with my bikes, I did do it for the 30 track bikes I did that are all ridden by kids, turns out when they get dropped a lot they start unraveling.
Russ Roth is offline  
Old 01-27-21, 05:42 AM
  #20  
SapInMyBlood
Enthusiastic Sufferer
Thread Starter
 
SapInMyBlood's Avatar
 
Join Date: Nov 2017
Location: Perth, Australia
Posts: 62

Bikes: 2015 Specialized Roubaix, 2014 Salsa Fargo, 2013 Trek Remedy, 2014 Cannondale Synapse

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 32 Post(s)
Liked 23 Times in 18 Posts
Thanks for all the help guys! It sounds like I'll employ an exacto knife and trim it down to shape. Currently, I'm not envisioning any way that the little flap wouldn't occur while it's folded inside. No matter what there will be a crossover from the folded bit to the outside wrap

Will report back in a bit!
SapInMyBlood is offline  
Old 01-27-21, 08:32 AM
  #21  
Unca_Sam
The dropped
 
Unca_Sam's Avatar
 
Join Date: Oct 2018
Location: Columbus, OH
Posts: 1,889

Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1966 Schwinn Deluxe Racer, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 1395 Post(s)
Liked 690 Times in 484 Posts
You've probably already cut it, but Calvin Jones' demo in wrapping bars reminds me to stretch the hell out of the tape at the end of the bar, so that it puckers into the hole. Stretch and wrap as tight as you can there, even if you won't be wrapping the rest of the bars with white-knuckle force.
Unca_Sam is offline  
Likes For Unca_Sam:
Old 01-27-21, 09:01 AM
  #22  
Drew Eckhardt 
Senior Member
 
Drew Eckhardt's Avatar
 
Join Date: Apr 2010
Location: Mountain View, CA USA and Golden, CO USA
Posts: 6,319

Bikes: 97 Litespeed, 50-39-30x13-26 10 cogs, Campagnolo Ultrashift, retroreflective rims on SON28/PowerTap hubs

Mentioned: 9 Post(s)
Tagged: 0 Thread(s)
Quoted: 538 Post(s)
Liked 294 Times in 208 Posts
I wrap the tape flush and use Nitto plugs which clamp in place.

Drew Eckhardt is offline  
Old 01-27-21, 09:56 AM
  #23  
cxwrench
Senior Member
 
cxwrench's Avatar
 
Join Date: Jul 2013
Location: Nor-Cal
Posts: 1,150

Bikes: lots

Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
Quoted: 473 Post(s)
Liked 506 Times in 294 Posts
Originally Posted by Unca_Sam View Post
You've probably already cut it, but Calvin Jones' demo in wrapping bars reminds me to stretch the hell out of the tape at the end of the bar, so that it puckers into the hole. Stretch and wrap as tight as you can there, even if you won't be wrapping the rest of the bars with white-knuckle force.
Don't do that with DSP Lizard Skins and some other tapes...you'll instantly turn a $40.00 job into an $80.00 job.
cxwrench is offline  
Likes For cxwrench:
Old 01-27-21, 10:34 AM
  #24  
Unca_Sam
The dropped
 
Unca_Sam's Avatar
 
Join Date: Oct 2018
Location: Columbus, OH
Posts: 1,889

Bikes: Pake C'Mute Touring/Commuter Build, 1989 Kona Cinder Cone, 1995 Trek 5200, 1973 Raleigh Super Course FG, 1966 Schwinn Deluxe Racer, 1960/61 Montgomery Ward Hawthorne "thrift" 3 speed, by Hercules

Mentioned: 8 Post(s)
Tagged: 0 Thread(s)
Quoted: 1395 Post(s)
Liked 690 Times in 484 Posts
Originally Posted by cxwrench View Post
Don't do that with DSP Lizard Skins and some other tapes...you'll instantly turn a $40.00 job into an $80.00 job.
As always, follow the manufacturer's directions when installing. Doesn't Lizard Skins tape include a warning not to stretch their tape when installing? That would be your first clue.

OP's tape is EVA backed PU tape, and similar to Supacaz Sticky Kush tape. Stretching for install is advised. Calvin's advice here is to take a piece of tape before wrapping and pulling on it to see how much stretch it can take before installing, since cheaper EVA/cork tapes will tear before EVA/PU tapes will.
Unca_Sam is offline  
Old 01-27-21, 10:44 AM
  #25  
jadocs
Senior Member
 
jadocs's Avatar
 
Join Date: Jul 2018
Location: USA
Posts: 2,128

Bikes: Ti, Mn Cr Ni Mo Nb, Al, C

Mentioned: 22 Post(s)
Tagged: 0 Thread(s)
Quoted: 906 Post(s)
Liked 496 Times in 333 Posts
Originally Posted by SapInMyBlood View Post
Thanks for all the help guys! It sounds like I'll employ an exacto knife and trim it down to shape. Currently, I'm not envisioning any way that the little flap wouldn't occur while it's folded inside. No matter what there will be a crossover from the folded bit to the outside wrap

Will report back in a bit!
Unwrap it and red-do it so you have enough material to stuff in the ends. Whenever I start a wrap, I always check to see what it looks like before I continue on. One way to check is to start a wraps and stick the bar end plug in before you continue. That way if it looks weird, you can redo it until it looks right. Putting the plug in before your continue will also help those who feel like they need tape to hold it while they wrap.
jadocs is offline  
Likes For jadocs:

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.