Go Back  Bike Forums > Bike Forums > Classic & Vintage
Reload this Page >

Powder coaters you like - post them here!

Notices
Classic & Vintage This forum is to discuss the many aspects of classic and vintage bicycles, including musclebikes, lightweights, middleweights, hi-wheelers, bone-shakers, safety bikes and much more.

Powder coaters you like - post them here!

Old 01-25-21, 08:48 PM
  #1  
gugie 
Dilberteur at large
Thread Starter
 
gugie's Avatar
 
Join Date: Jul 2014
Location: Portland, OR
Posts: 8,931

Bikes: It's complicated.

Mentioned: 980 Post(s)
Tagged: 0 Thread(s)
Quoted: 3109 Post(s)
Liked 1,248 Times in 653 Posts
Powder coaters you like - post them here!

Every few months or so a powder coating thread is started up - who do you use, how much does it cost, is it any good? Powder coating can be a relatively inexpensive, very durable way to finish your bike project. We've all heard horror stories of frames practically etched through by improper media blasting, lug details ruined by overly thick application, and terrible masking. Many are looking for someone they can trust with their precious frame and fork.

In this thread let's not argue about whether one should powder coat, whether it's as good as wet paint, etc. Assume someone is already sold on powder coating, but where are the good ones? I've used professional, regionally known outfits, as well as a guy working out of his garage that all did good work. Since shipping costs to and from a powder coater can eat up half or more of your budget, it's good to know somebody relatively local that you can drive a frame and fork over to.

Here's the ask: only post powder coaters that have experience with bicycle frames that you or somebody you know has used. If somebody else has posted your favorite powder coater, it's fine to second, third, etc. the motion. I'll update this opening post and link to those who post about them. This will be a living document, powder coaters come and go, I'll update with information as it's posted and verified. Heck, it may even make it into the sticky hall of fame!

Please post the following information:
1. Contact info - including location!
2. Bikes you've had powder coated, including pics!
3. Your review - quality, price paid

listings by state or country with link to BF post with more info:

States represented:




map made from https://mapchart.net/usa.html

California
NorCal
Champion Powder Coating - San Francisco, CA
Powdercoatit - Santa Cruz, CA
TNT powdercoating - Shingle Springs, CA
West Coast Powder Coatings - South San Francisco, CA
SoCal
Colorado
Rock City Custom Powder And Paint - Colorado Springs, CO
Dark Matter Finishing - Colorado Springs, CO
Delaware

Retro Cruiser Bicycles - Lincoln, Delaware
Florida
Fusion Powdercoating - Dania, FL
Hawaii
Mekala Powdercoat & Patio Mfg - Kapolei, Oahu HI
Illinois
Harely Eades Jr - Pekin, IL
J&J Powder- Zion, IL
Indiana
PCT Coating - Anderson, Indiana
Pro Kote Indy - Indianapolis, IN
Iowa
ReeRodz Powder Coating - Prole IA
Kansas
Groody Brothers - Topeka, Kansas
Louisiana
a guy named Cameron - New Orleans, LA
Massachusetts
Nationwide powder coating - Methuen, MA
Pike Powder Coating - Allston, MA
Michigan
H&H Powdercoating - Fenton, MI
Minnesotta
Powdercoat Man - Maple Grove, MN

Oregon
CC Coatings - Portland, Oregon
Santiam Powder Coating - Scio, OR
Pennsylvania

Bonehead Performance Coatings - Lower Southampton Township, PA
Washington
Forever Powder Coating - Olympia, WA
Ken's Powdercoating - Graham, Washington
Seattle Powder Coat - Seattle, WA
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.

Last edited by gugie; 02-25-21 at 10:53 AM. Reason: rearranged by state rather than alphabetically
gugie is offline  
Old 01-25-21, 08:56 PM
  #2  
sloar 
Senior Member
 
Join Date: Sep 2008
Location: Elwood Indiana
Posts: 6,673

Bikes: they change so much I'm tired of updating this

Mentioned: 148 Post(s)
Tagged: 0 Thread(s)
Quoted: 953 Post(s)
Likes: 0
Liked 309 Times in 143 Posts
PCT coating in Anderson Indiana. I was quoted $80 for sandblasting and single stage color. Iíve seen very nice work on several frames.
__________________
Semper fi
sloar is offline  
Old 01-25-21, 08:59 PM
  #3  
gugie 
Dilberteur at large
Thread Starter
 
gugie's Avatar
 
Join Date: Jul 2014
Location: Portland, OR
Posts: 8,931

Bikes: It's complicated.

Mentioned: 980 Post(s)
Tagged: 0 Thread(s)
Quoted: 3109 Post(s)
Liked 1,248 Times in 653 Posts
CC Coatings, Portland Oregon

This is my go to place in Portlandia. They have a history of powder coating bike frames, but with new ownership about 5 years ago I was hesitant to use them. The cheapie, quirkie place out on the eastside was sold, the $80 guy out in Amity Oregon that did great work out of his garage moved to Phoenix Arizona, so I tried CC Coatings, now owned by a guy named Jason who only takes cash for bicycle framework. The daughter of the previous owner was persuaded to hang around to teach him how to do bike frames. He's gotten better to the point that I now recommend him

CC Powder Coating
https://www.powdercoatingportlandor.com/
9256 SE 67th Ave, Portland, OR 97206

$140 for one color, additional charges for masking and special ordering powder (although he has a very big selection in stock)

I recommend them for single colors, although he can do decals and clear coat. Also can send out for chemical strip of old powder coat






__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
gugie is offline  
Likes For gugie:
Old 01-25-21, 09:18 PM
  #4  
gugie 
Dilberteur at large
Thread Starter
 
gugie's Avatar
 
Join Date: Jul 2014
Location: Portland, OR
Posts: 8,931

Bikes: It's complicated.

Mentioned: 980 Post(s)
Tagged: 0 Thread(s)
Quoted: 3109 Post(s)
Liked 1,248 Times in 653 Posts
Groody Brothers - Kansas

Mark Rainey doesn't just do powder coating. He's a bike guy, ex-mechanic, so you can send him a whole bike, he can strip it down, powder coat, and rebuild it. He's also knows how to use a torch, so if you want some bottle or shifter bosses added, even cantilevers, he can do your frame mods prior to powder coating all in one swell foop. Mark is the face of Groody Brothers, right smack dab in the middle of the country, so if you don't have anybody local and need to ship a frame in the contiguous USA, you're probably not a huge shipping cost away. I've had two frames done at Groody Brothers, and I'll send them more. Both of the frames were decaled and clear coated, one of them was a two color job. Mark nailed them both.

Groody Brothers
https://groodybros.com/


decals, two tone, lug lining, clear coat

decals, lug lining, clear coat


Pic courtesy of Andy Kaylor - decals, two tone paint job, clear coat
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.

Last edited by gugie; 01-25-21 at 09:50 PM.
gugie is offline  
Old 01-25-21, 10:03 PM
  #5  
Hudson308 
Mr. Anachronism
 
Hudson308's Avatar
 
Join Date: Jan 2013
Location: City of Lakes
Posts: 2,017

Bikes: fillet-brazed Chicago Schwinns, and some other stuff

Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 504 Post(s)
Liked 185 Times in 127 Posts
Powdercoat Man Doug Arntson in Maple Grove, MN.
https://www.powdercoatman.com/
You can contact him at 612-834-9002, or search for "Powdercoat Man" on Facebook.
Like Mark Rainey, Doug is a bike guy. He knows the importance of sharp lug shorelines and etched or panto'd details.


__________________
"If we don't change direction soon, we'll end up where we're going." -Irwin Corey

Last edited by Hudson308; 02-14-21 at 05:26 PM. Reason: added web address
Hudson308 is offline  
Likes For Hudson308:
Old 01-25-21, 10:48 PM
  #6  
nlerner
Senior Member
 
Join Date: Dec 2005
Posts: 13,957
Mentioned: 323 Post(s)
Tagged: 0 Thread(s)
Quoted: 2053 Post(s)
Liked 1,409 Times in 768 Posts
Pike Powder Coating
Allston, MA
https://pikepowdercoating.com


nlerner is offline  
Old 01-26-21, 12:59 AM
  #7  
thook
Senior Member
 
Join Date: Aug 2009
Location: Winslow, AR
Posts: 1,581

Bikes: '83 univega gran turismo x2, '85 schwinn super le tour,'89 miyata triple cross, '91 GT tequesta, '90 yokota grizzly peak, '94 GT backwoods, '95'ish scott tampico, '98 bonty privateer, '93 mongoose crossway 625, '98 parkpre ariel, 2k'ish giant fcr3

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 342 Post(s)
Liked 199 Times in 151 Posts
Originally Posted by Hudson308 View Post


questions, if you don't mind....

love that color! what is it called?
the tires....what are they and size? (i have some of those DC's and ponder using them for some better tire clearance. current brakes don't have much)
and, do you have any full photos of that bike? looks awesome!

thanks, matthew
thook is offline  
Old 01-26-21, 02:17 AM
  #8  
Andy_K 
Senior Member
 
Andy_K's Avatar
 
Join Date: Jan 2008
Location: Beaverton, OR
Posts: 12,860

Bikes: Yes

Mentioned: 350 Post(s)
Tagged: 0 Thread(s)
Quoted: 2104 Post(s)
Liked 689 Times in 364 Posts
I had my first Motobecane done at Forever Powder Coating in Olympia, Washington (https://www.foreverpowdercoating.com/). They did two tone with masked Nervex lugs and seat tube panels, plus clear coat for $375. That was several years ago, so I don't know what the price would be now. I added decals myself over the clear coat. (I was young and foolish then. OK, maybe just foolish.)





I chose the color to match my fenders.



One oddity was that they left the dropouts bare. I know it seems like it's asking for rust, but that hasn't happened yet.



I'm sure they'd not do this if you asked them.
__________________
My Bikes
Andy_K is offline  
Likes For Andy_K:
Old 01-26-21, 07:49 AM
  #9  
NitroExpress
Member
 
Join Date: Aug 2017
Location: Memphis, TN
Posts: 25

Bikes: 1974 Mirella ~ Campy Record Group, 1985 Maruishi Mountain Ace 18, 1999 Waterford 2200

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 5 Post(s)
Liked 1 Time in 1 Post

Harely did a great job on a 1973 Motobecane Le Champion

Harely Eades Jr
Like New Parts
1310 B Derby Street
Pekin, IL 61554, USA


NitroExpress is offline  
Old 01-26-21, 12:35 PM
  #10  
mstateglfr 
Sunshine
 
mstateglfr's Avatar
 
Join Date: Aug 2014
Location: Des Moines, IA
Posts: 12,035

Bikes: '18 class built steel roadbike, '19 Fairlight Secan, '88 Schwinn Premis , Black Mountain Cycles Monstercross V4, '89 Novara Trionfo

Mentioned: 97 Post(s)
Tagged: 0 Thread(s)
Quoted: 4891 Post(s)
Liked 2,131 Times in 1,272 Posts

ReeRodz Powder Coating in Prole IA 515.981.5967

Central IA near Des Moines.

$125 for them to blast then powdercoat a frame and fork in the color I wanted(they had to buy the color).
It was fast, they plugged tubing holes, and its evenly applied.
- I had to sand down the rear dropouts as the powder is thicker than the original paint and the hub axle wasnt sliding in smoothly.
- the powder is on the thicker side, but lug lines are still quite defined(the Schwinn Premis frame's lack of thinned lugs helps here).


The blue color is powdercoat. Ignore the red flecks as my kids did that.

mstateglfr is offline  
Old 01-26-21, 12:35 PM
  #11  
Rocket-Sauce 
Port
 
Rocket-Sauce's Avatar
 
Join Date: Jan 2008
Location: Boston
Posts: 8,086

Bikes: 2021 Calfee Draqonfly 44, 1984 Peter Mooney, 2017 Soma Stanyan, 1990 Fuji Ace, 1990 Bridgestone RB-1, 1995 Independent Fabrications Track, 2003 Calfee Dragonfly Pro

Mentioned: 11 Post(s)
Tagged: 0 Thread(s)
Quoted: 630 Post(s)
Liked 424 Times in 281 Posts
MAKE THIS A STICKY!!!
Could posters also include prices?
Rocket-Sauce is offline  
Old 01-26-21, 01:32 PM
  #12  
Johno59
Senior Member
 
Join Date: Oct 2016
Location: Cambridge UK
Posts: 649

Bikes: 1903 24 spd Sunbeam, 1927 Humber, 3 1930 Raleighs, 2 1940s Sunbeams, 2 1940s Raleighs, Rudge, 1950s Robin Hood, 1958 Claud Butler, 2 1973 Colnago Supers, Eddie Merckx, 2 1980 Holdsworth, EG Bates funny TT bike, another 6 or so 1990s bikes

Mentioned: 14 Post(s)
Tagged: 0 Thread(s)
Quoted: 262 Post(s)
Liked 134 Times in 103 Posts
I personally don't mind the thicker less definition PC sometimes leaves. What I have found alarming is water can get under the PC undetected and cause very deep rust - especially so if road salt is about.
. From what I can discern , the PC can crack where a right-angle occurs ie a lug, cable stop, bolt mount etc. Water leeches in and you have a hidden problem. Regular waxing may eliminate this problem completely.
One thing I have learned recently is to remove PC burning it off is 10 times easier than any other way and I say that as a person who has access to super dangerous industrial chemical solvent baths.
Johno59 is offline  
Likes For Johno59:
Old 01-26-21, 05:01 PM
  #13  
rjhammett
Senior Member
 
rjhammett's Avatar
 
Join Date: Dec 2011
Location: Saint Paul, Minnesota
Posts: 2,154

Bikes: 92 Colnago Master PIU, 85 Fuso, 92 Bridgestone RB-1, 83 Pinarello Record, 92 Tommaso, 92 Merckx MX Leader, 90 Serotta Colorado II, 99 Tommasini Sintesi, 90 Pinarello Montello, 89 Tommasini Super Prestige, 08 Look 585 and 8 more

Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 271 Post(s)
Liked 220 Times in 114 Posts
These were done by Powdercoat Man.






Last edited by rjhammett; 01-26-21 at 05:27 PM.
rjhammett is offline  
Likes For rjhammett:
Old 01-26-21, 06:50 PM
  #14  
unworthy1
Stop reading my posts!
 
unworthy1's Avatar
 
Join Date: Sep 2004
Posts: 11,195
Mentioned: 68 Post(s)
Tagged: 0 Thread(s)
Quoted: 704 Post(s)
Liked 276 Times in 226 Posts
I don't have pix but these guys are in SF, priced pretty low for the location, do better work than "some" who have been around longer and certainly should know their way around bike frames. That said I can't shower them with praise exactly but "not bad for $125" (and up). I had at least 3 or four frames done by them but none for my personal fleet."Prices listed include media blasting of new metal parts, as well as masking and plugging of threaded holes.

Custom masking is extra. There will be an additional charge for removal of old powder coating, paint, or rust."

Champion Powder Coating San Francisco CA.
unworthy1 is offline  
Likes For unworthy1:
Old 01-27-21, 07:15 PM
  #15  
Hudson308 
Mr. Anachronism
 
Hudson308's Avatar
 
Join Date: Jan 2013
Location: City of Lakes
Posts: 2,017

Bikes: fillet-brazed Chicago Schwinns, and some other stuff

Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 504 Post(s)
Liked 185 Times in 127 Posts
Originally Posted by thook View Post
questions, if you don't mind....
love that color! what is it called?
the tires....what are they and size? (i have some of those DC's and ponder using them for some better tire clearance. current brakes don't have much)
and, do you have any full photos of that bike? looks awesome!
thanks, matthew

Thanks for the kind words, Matthew!
It's a 1980-ish Fuji S12-S that I rebuilt for my wife. She loves it.
I had Doug use RAL 3027 Raspberry Red as a base coat, then go over it with Violet Sapphire Chameleon. Both of these powders are available from Columbia Coatings.
The tires are Club Roost Cross Terras. I think they're 27 x 1-3/8.

__________________
"If we don't change direction soon, we'll end up where we're going." -Irwin Corey

Last edited by Hudson308; 01-27-21 at 07:26 PM.
Hudson308 is offline  
Old 01-27-21, 07:24 PM
  #16  
thook
Senior Member
 
Join Date: Aug 2009
Location: Winslow, AR
Posts: 1,581

Bikes: '83 univega gran turismo x2, '85 schwinn super le tour,'89 miyata triple cross, '91 GT tequesta, '90 yokota grizzly peak, '94 GT backwoods, '95'ish scott tampico, '98 bonty privateer, '93 mongoose crossway 625, '98 parkpre ariel, 2k'ish giant fcr3

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 342 Post(s)
Liked 199 Times in 151 Posts
Originally Posted by Hudson308 View Post
Thanks for the kind words, Matthew!
It's a 1980-ish Fuji S12-S that I rebuilt for my wife. She loves it.
I had Doug combine a couple of different powders to come up with that hot pink. We used RAL 3027 Raspberry Red as a base coat, then went over it with Violet Sapphire Chameleon. These are available from Columbia Coatings.
The tires are Club Roost Cross Terras. I think they're 27 x 1-3/8.
thank you....and, yer welcome! it really is lovely

i've seen those tires mentioned recently. i see they're at modern bike. are they really a 35mm width?
thook is offline  
Old 01-27-21, 07:40 PM
  #17  
Hudson308 
Mr. Anachronism
 
Hudson308's Avatar
 
Join Date: Jan 2013
Location: City of Lakes
Posts: 2,017

Bikes: fillet-brazed Chicago Schwinns, and some other stuff

Mentioned: 27 Post(s)
Tagged: 0 Thread(s)
Quoted: 504 Post(s)
Liked 185 Times in 127 Posts
Originally Posted by thook View Post
thank you....and, yer welcome! it really is lovely

i've seen those tires mentioned recently. i see they're at modern bike. are they really a 35mm width?
They're pretty wide. Perfect for gravel grinding or casual riding on asphalt.
__________________
"If we don't change direction soon, we'll end up where we're going." -Irwin Corey
Hudson308 is offline  
Old 01-27-21, 07:47 PM
  #18  
Mad Honk 
Senior Member
 
Join Date: May 2019
Location: Bloomington, IN
Posts: 1,341

Bikes: Trek 770, Trek 760, Schwinn Paramount, Patelli Professional, Othon Ochsner

Mentioned: 25 Post(s)
Tagged: 0 Thread(s)
Quoted: 562 Post(s)
Liked 448 Times in 340 Posts
Gugie,
You have already mentioned ProKote Indy where I get all of my work done. There are plenty of pics in the forums under my name that show some of their work. They do the powder coating and then I add decals and clear coat. It allows me to do what ever I want for the decals and then get the frame to look right to my eye. I will say that they are good and get things right. They preserve serial numbers under clear coat and mask off parts that are chrome or don't need the powder. They are old school hot rod folks who understand what a person wants in a restoration or a new build. I know two dirt track guys who have had their frames done there and after two years the PC is still like new. They are the best in the biz in my opinion. Smiles, MH
Oops! I for got to mention price. The average price to frame fork and bottle cages is $240. The turn around is about two weeks. MH.

Last edited by Mad Honk; 01-28-21 at 09:50 AM.
Mad Honk is offline  
Old 01-27-21, 07:49 PM
  #19  
thook
Senior Member
 
Join Date: Aug 2009
Location: Winslow, AR
Posts: 1,581

Bikes: '83 univega gran turismo x2, '85 schwinn super le tour,'89 miyata triple cross, '91 GT tequesta, '90 yokota grizzly peak, '94 GT backwoods, '95'ish scott tampico, '98 bonty privateer, '93 mongoose crossway 625, '98 parkpre ariel, 2k'ish giant fcr3

Mentioned: 10 Post(s)
Tagged: 0 Thread(s)
Quoted: 342 Post(s)
Liked 199 Times in 151 Posts
Originally Posted by Hudson308 View Post
They're pretty wide. Perfect for gravel grinding or casual riding on asphalt.
at some point, i'll have to them a try, then.

gravel....my experience has been 27" wheels feel smoother than 700c in the same given tire width. some of those look to be a lot of fun
thook is offline  
Old 01-27-21, 08:23 PM
  #20  
mhespenheide
Senior Member
 
Join Date: May 2019
Location: north-central MA
Posts: 96

Bikes: Felt F1PR, LeMond Victoire, Bianchi Campione d'Italia, Kona Hei Hei, Ritchey Ultra, Schwinn Paramount PDG

Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 42 Post(s)
Liked 31 Times in 28 Posts
I'll add another vote of confidence for Groody Brothers, who powdercoated a celeste Bianchi for me after gugie did some work on it. I'm on my laptop and don't have images of it on this computer, but I'll point out two nice touches of customer service: I had asked for a specific powder that's recommended for celeste. Mark test ran some other colors that he thought better matched the existing paint, on his own, and sent images for me to compare. I ended up continuing to go with the powder I first picked, but it speaks to their care. Also, the decals I sent were thicker than they should have been and didn't feather nicely under the clear coat (which they send out). Mark asked me to send another set of decals and (I'm guessing) paid for another round of clear-coating on his dime.

Moral, though -- check with VeloCals and your powdercoater/clearcoater for what thickness of decals they want.
mhespenheide is offline  
Old 01-27-21, 09:04 PM
  #21  
scarlson
Senior Member
 
scarlson's Avatar
 
Join Date: Jun 2010
Location: Medford MA
Posts: 1,163

Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, Renť Herse tandem

Mentioned: 41 Post(s)
Tagged: 0 Thread(s)
Quoted: 507 Post(s)
Liked 593 Times in 351 Posts
Nationwide powder coating - Methuen, MA

Like the 'pike itself, Pike Powder was very expensive, so I shopped around. Northern MA has some industry still left. These guys do paint for working machines, not just the clean-handed urban crowd.




So glad I went to these people. I think this was in the $200 range. They know how to deal with bikes, and masked off all the necessary bits without any fuss. They even left a cable I'd threaded through the fork to pull dynamo wire through. Awesome work, and we chatted on the phone first, so I got in and out quick: took about 2 weeks turnaround. I also had them do a motorcycle frame/swingarm and another bike frame as well. All went fine.
scarlson is offline  
Old 02-01-21, 11:33 PM
  #22  
Senior Ryder 00
Old bikes, Older guy
 
Senior Ryder 00's Avatar
 
Join Date: Jun 2014
Location: Fiscal Conservative on the Lefty Coast - Oregon
Posts: 508

Bikes: A few modern, Several vintage, All ridden when weather allows.

Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 119 Post(s)
Liked 28 Times in 21 Posts
Great idea!

Iíll add a recent discovery: Santiam Powder Coating in Scio, OR. Phone: 541-791-6515. Email: SatiamPC@gmail.com. Roy Tollefson is the owner.

Last summer I facilitated the coating of a batch of four frame sets for our local co-op. One of which was my vintage English touring bike with ornate Nervex lug work. Iíve had about Ĺ dozen frames coated over the years and this was the best. Itís very smooth and glossy plus the definition around the lugs is excellent. Pix attached.



The cost was $90 each as a special to the non profit, community service co-op. All of these bikes were the same color. I suspect that individual frame sets in a custom color would be ~$120.

This is a small operation and they were hit hard by the pandemic issues and illness. This slowed the turn around, but was well worth the wait.

Cheers,

Van



Senior Ryder 00 is offline  
Likes For Senior Ryder 00:
Old 02-14-21, 02:33 PM
  #23  
gugie 
Dilberteur at large
Thread Starter
 
gugie's Avatar
 
Join Date: Jul 2014
Location: Portland, OR
Posts: 8,931

Bikes: It's complicated.

Mentioned: 980 Post(s)
Tagged: 0 Thread(s)
Quoted: 3109 Post(s)
Liked 1,248 Times in 653 Posts
Could use some powder coaters in the Southeast, Texas, SoCal...anybody?
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
gugie is offline  
Old 02-14-21, 02:37 PM
  #24  
lasauge 
Pedalin' Erry Day
 
lasauge's Avatar
 
Join Date: Jun 2011
Location: Chico, CA
Posts: 1,011
Mentioned: 15 Post(s)
Tagged: 0 Thread(s)
Quoted: 590 Post(s)
Liked 98 Times in 57 Posts
I would add Rock City Custom Powder And Paint in Colorado Springs, CO to the list. Daniel Garcia runs that business and did a great job on 2 frames for me a couple years ago and I've seen a couple other frames he did for other folks too. Highly recommended and very affordable even with custom colors.

dan_garcia719@yahoo.com
719-217-8100

Right click to follow links - somehow I never took pictures of these as bare frames, here's what they looked like when built up:
__________________
Reach me faster by email.

Last edited by lasauge; 02-14-21 at 02:46 PM.
lasauge is offline  
Old 02-14-21, 03:05 PM
  #25  
gugie 
Dilberteur at large
Thread Starter
 
gugie's Avatar
 
Join Date: Jul 2014
Location: Portland, OR
Posts: 8,931

Bikes: It's complicated.

Mentioned: 980 Post(s)
Tagged: 0 Thread(s)
Quoted: 3109 Post(s)
Liked 1,248 Times in 653 Posts
Originally Posted by lasauge View Post
I would add Rock City Custom Powder And Paint in Colorado Springs, CO to the list.
Thanks, added!
__________________
If someone tells you that you have enough bicycles and you don't need any more, stop talking to them. You don't need that kind of negativity in your life.
gugie is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright © 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.