eflayer

most parts are now gone, still have wheels, bars, crankset, brakes, bb.

Selling my all-around favorite frameset of the 50 or so I've owned over the last 15 years. I've tried them all and this was my best all around pavement machine. Selling only due to being forced into electronic shifting by f-ing aging thumb joints.

Custom designed for me in collaboration with Davis Carver at Carver Bikes. This was designed somewhat in the spirit of Rivendell Rambouillets I have owned. Not too upright, just long enough, and with a longer headtube for all-day comfort. Designed with my 185 lbs. and stand-to-climb riding style in mind. Chainstays are bit bigger than smaller and the downtube was butted at extra cost. I specified flat rear dropouts cuz I'm not fond of the hooded ones. Weld quality is really good and I always liked how the chain stays were finished where they meet the rear dropouts.

standard / short reach brakes
59.5 center to center top tube
58.5 seat tube
72.25 seat tube angle
73 headtube angle
226mm headtube
310mm fork steer tube
102.5 wheelbase
80mm bb drop

Fork is Enve 2.0 with blacked out logos. Steerer length is 310mm and the fork works fine with a real 28mm tire. The rear works fine with a 28mm Conti 4000 that measures 30mm on these A23 rims.

Frame is near perfect condition, fork is great too with a couple of nicks.

photos and bikecad:

https://photos.app.goo.gl/LHPsiSpio5YQwtNn6

$750 net to me including shipping to you.
frame, fork, headset and other red bits (headset, seat collar, cable adjusters, valve caps)

cycleman1000

How tall riders can ride this bike?

eflayer

up 5 inches probably too.

eflayer

thanks for looking.

eflayer

thx

eflayer

thanks