Yard/estate sale part 2 - custom bike
#26
Ellensburg, WA
Thread Starter
Join Date: Aug 2008
Location: Ellensburg, WA
Posts: 3,755
Bikes: See my signature
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 313 Post(s)
Liked 458 Times
in
160 Posts
Sorry to ask, but I guess I am having a senior block.
You're saying you need to lower the saddle? But the current seatpost can't go lower? Are these marked for max as well as min insertion? To my eye it appears it could still go down - what am I missing?
Finally, you mentioned needing a longer seatpost so you can go lower. That sounds backwards to me.
I hope this didn't come off as snarky. I am genuinely confused.
You're saying you need to lower the saddle? But the current seatpost can't go lower? Are these marked for max as well as min insertion? To my eye it appears it could still go down - what am I missing?
Finally, you mentioned needing a longer seatpost so you can go lower. That sounds backwards to me.
I hope this didn't come off as snarky. I am genuinely confused.
The post is at the limit line for insertion into the seat tube. I suspect it's because of the aero section on the post being thinner that it was designed not to go lower than it is. I could just adjust down further, and might do that. I'm not a clydesdale so it could be alright.
A longer seat post is probably not accurate - was really referring to one that's not aero which would allow it to go lower.
__________________
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
#28
Ellensburg, WA
Thread Starter
Join Date: Aug 2008
Location: Ellensburg, WA
Posts: 3,755
Bikes: See my signature
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 313 Post(s)
Liked 458 Times
in
160 Posts
The comment today was "now you need to start selling bikes". Probably be more like parts. But, I do need to shrink the fleet a little.
__________________
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
Likes For scozim:
#29
Banned.
Join Date: Jul 2009
Location: PAZ
Posts: 12,294
Mentioned: 255 Post(s)
Tagged: 0 Thread(s)
Quoted: 2588 Post(s)
Liked 4,824 Times
in
1,709 Posts
Sorry to ask, but I guess I am having a senior block.
You're saying you need to lower the saddle? But the current seatpost can't go lower? Are these marked for max as well as min insertion? To my eye it appears it could still go down - what am I missing?
Finally, you mentioned needing a longer seatpost so you can go lower. That sounds backwards to me.
You're saying you need to lower the saddle? But the current seatpost can't go lower? Are these marked for max as well as min insertion? To my eye it appears it could still go down - what am I missing?
Finally, you mentioned needing a longer seatpost so you can go lower. That sounds backwards to me.
Scott, that line is for minimum insertion - not maximum. You can lower that post another 1.5 inches if you need to as that round section extends up at least that high from the lug to my eye.
DD
#30
Senior Member
Join Date: Oct 2015
Location: PDX
Posts: 13,043
Bikes: Merz x 5 + Specialized Merz Allez x 2, Strawberry/Newlands/DiNucci/Ti x3, Gordon, Fuso/Moulton x2, Bornstein, Paisley,1958-74 Paramounts x3, 3rensho, 74 Moto TC, 73-78 Raleigh Pro's x5, Marinoni x2, 1960 Cinelli SC, 1980 Bianchi SC, PX-10 X 2
Mentioned: 267 Post(s)
Tagged: 0 Thread(s)
Quoted: 4512 Post(s)
Liked 6,385 Times
in
3,670 Posts
I think he's trying to say that aero post can't go low enough before the skinny section is in side the seatube and looks wrong.
#31
Banned.
Join Date: Jul 2009
Location: PAZ
Posts: 12,294
Mentioned: 255 Post(s)
Tagged: 0 Thread(s)
Quoted: 2588 Post(s)
Liked 4,824 Times
in
1,709 Posts
DD
#32
Senior Member
Join Date: Jun 2008
Location: Louisville, KY
Posts: 13,447
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 4236 Post(s)
Liked 2,949 Times
in
1,808 Posts
Nice looking bike.
#33
Ellensburg, WA
Thread Starter
Join Date: Aug 2008
Location: Ellensburg, WA
Posts: 3,755
Bikes: See my signature
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 313 Post(s)
Liked 458 Times
in
160 Posts
Nope - only 1
__________________
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
#35
Senior Member
One more possibility for the saddle height issue would be to use shorter cranks. Maybe not a practical solution though, unless you have some laying around.
#36
Ellensburg, WA
Thread Starter
Join Date: Aug 2008
Location: Ellensburg, WA
Posts: 3,755
Bikes: See my signature
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 313 Post(s)
Liked 458 Times
in
160 Posts
Currently has 170's. I thought about 165's but those might be tough to get in Campagnolo.
It's cleaning up nicely despite the anodizing issues with the large chainring. Maybe that's because the rings are French.
It's cleaning up nicely despite the anodizing issues with the large chainring. Maybe that's because the rings are French.
__________________
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
#37
Banned.
Join Date: May 2010
Location: Snohomish, WA.
Posts: 2,866
Mentioned: 33 Post(s)
Tagged: 0 Thread(s)
Quoted: 469 Post(s)
Liked 2,443 Times
in
646 Posts
I saw this bike at the yard sale, and again at Scotts house the other day. It really is a beautiful frame.the filet brazing is really something, and that blue in the sun is amazing. You did well.
Also, really envious of that shop. You'll have a great place to work on bikes and your Falcon.
#39
Ellensburg, WA
Thread Starter
Join Date: Aug 2008
Location: Ellensburg, WA
Posts: 3,755
Bikes: See my signature
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 313 Post(s)
Liked 458 Times
in
160 Posts
What are the ones you have?
__________________
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
Last edited by scozim; 08-09-20 at 10:43 PM.
#40
Ellensburg, WA
Thread Starter
Join Date: Aug 2008
Location: Ellensburg, WA
Posts: 3,755
Bikes: See my signature
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 313 Post(s)
Liked 458 Times
in
160 Posts
Yep, why wait for insulation and drywall before using it. Just have to sit next to the wall that blocks the wind.
__________________
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
#41
Stop reading my posts!
Join Date: Sep 2004
Posts: 12,584
Mentioned: 90 Post(s)
Tagged: 0 Thread(s)
Quoted: 1444 Post(s)
Liked 1,062 Times
in
787 Posts
scozim I will have to dig into the confines of my storage but I THINK they were "'61-'63 Futura" style caps, but MIGHT be the "'64-'65" style...its been years since I looked at these (and hope I didn't chuck them out or sell them already but....will be looking and LYK via a PM)
#42
Bianchi Goddess
Join Date: Apr 2009
Location: Shady Pines Retirement Fort Wayne, In
Posts: 27,858
Bikes: Too many to list here check my signature.
Mentioned: 192 Post(s)
Tagged: 2 Thread(s)
Quoted: 2930 Post(s)
Liked 2,926 Times
in
1,491 Posts
Fabulous find, my favorite group too.
__________________
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
“One morning you wake up, the girl is gone, the bikes are gone, all that's left behind is a pair of old tires and a tube of tubular glue, all squeezed out"
Sugar "Kane" Kowalczyk
#44
Phyllo-buster
Join Date: Jan 2010
Location: Nova Scotia
Posts: 8,847
Bikes: roadsters, club bikes, fixed and classic
Mentioned: 133 Post(s)
Tagged: 0 Thread(s)
Quoted: 2298 Post(s)
Liked 2,054 Times
in
1,254 Posts
#46
Ellensburg, WA
Thread Starter
Join Date: Aug 2008
Location: Ellensburg, WA
Posts: 3,755
Bikes: See my signature
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 313 Post(s)
Liked 458 Times
in
160 Posts
My best guess is Columbus SL at this time after hearing back from the builder that they used a lot of Columbus during that time frame. Just would be metric based.
__________________
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
#47
Live Healthy
Join Date: Jun 2020
Posts: 417
Bikes: Wabi Classic
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Quoted: 183 Post(s)
Liked 137 Times
in
92 Posts
I posted about the yard/estate sale buy from this past weekend that was really like a swap meet. One of the bikes I posted that was for sale was a custom Rodriguez tandem. What I didn't mention is there was another Rodriguez - a road bike that looked to be about 30 yrs old. Fully Campagnolo group and blue - my favorite color. I didn't have the cash for it on Sunday and thought about it the entire way home. Part of the problem was springing for something like that is my wife who can squeeze a quarter out of a penny. Like most she doesn't understand N+1.
I had a custom bike for awhile - my dad's 1989 Spectrum titanium. It's a great bike but at 56 cm it was just a tad tall for me to want to ride all the time. So, it resides back at my dad's house in the basement as an enticement for one of my brother's to ride more. He hasn't so I'm hoping it actually ends back up with me in the future. But, having a custom built frame (granted used and not to my bodily dimensions) has always been a goal.
When I got back home Sunday I was surprised to find little resistance from my wife. Especially since I'm in the process of having a 36'X48' shop built and there's a lot of money being spent. So, with that, I headed back over the mountains to the Seattle suburbs to pick up my "new" bike this evening. It had better have been worth it. The drive over was an hour and 25 minutes. The drive back was 3.5 hrs thanks to road construction.
Photos are below - there are a couple of interesting things about it. The group (according to Drillium Dude) looks to be early Chorus. The chainstays are what I would call medium length at around 16.5 inches. The front fork will accept a low rider rack. Maybe it was built as an agile commuter? The frame is TIG welded (update: filet brazed) and has no lugs. The finish work is superb. Rear freewheel is a 7 speed, crankset looks to be 53-39. The rear wheel is a Mavic Open 4CD and the front is an aero Matrix ISOc with bladed spokes. Both are 32 hole.
The bike itself is extremely dirty but should clean up nicely. The grease and gunk on the rear derailleur is pretty nasty. So, I have my weekend chore assignment.
I'll change out the bar tape and throw on a Turbo saddle, tires, re-grease things that need to be and take it out for a spin to get the fit right.
Sorry for any cruddy photos - learning the new phone.
I had a custom bike for awhile - my dad's 1989 Spectrum titanium. It's a great bike but at 56 cm it was just a tad tall for me to want to ride all the time. So, it resides back at my dad's house in the basement as an enticement for one of my brother's to ride more. He hasn't so I'm hoping it actually ends back up with me in the future. But, having a custom built frame (granted used and not to my bodily dimensions) has always been a goal.
When I got back home Sunday I was surprised to find little resistance from my wife. Especially since I'm in the process of having a 36'X48' shop built and there's a lot of money being spent. So, with that, I headed back over the mountains to the Seattle suburbs to pick up my "new" bike this evening. It had better have been worth it. The drive over was an hour and 25 minutes. The drive back was 3.5 hrs thanks to road construction.
Photos are below - there are a couple of interesting things about it. The group (according to Drillium Dude) looks to be early Chorus. The chainstays are what I would call medium length at around 16.5 inches. The front fork will accept a low rider rack. Maybe it was built as an agile commuter? The frame is TIG welded (update: filet brazed) and has no lugs. The finish work is superb. Rear freewheel is a 7 speed, crankset looks to be 53-39. The rear wheel is a Mavic Open 4CD and the front is an aero Matrix ISOc with bladed spokes. Both are 32 hole.
The bike itself is extremely dirty but should clean up nicely. The grease and gunk on the rear derailleur is pretty nasty. So, I have my weekend chore assignment.
I'll change out the bar tape and throw on a Turbo saddle, tires, re-grease things that need to be and take it out for a spin to get the fit right.
Sorry for any cruddy photos - learning the new phone.
#48
Ellensburg, WA
Thread Starter
Join Date: Aug 2008
Location: Ellensburg, WA
Posts: 3,755
Bikes: See my signature
Mentioned: 77 Post(s)
Tagged: 0 Thread(s)
Quoted: 313 Post(s)
Liked 458 Times
in
160 Posts
It wasn't a steal. But it was a fair price
__________________
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
1984 Gitane Tour de France; 1968 Peugeot PL8; 1982 Nishiki Marina 12; 1984 Peugeot PSV; 1993 Trek 950 mtb; 1983 Vitus 979; Colnago Super, mid-80's Bianchi Veloce, 1984 or 85 Vitus 979
#49
Senior Member
The single butted seat tubes really need a lug or a collar to take the clamp load.
#50
Riding the Greek Isles...
Beautiful !