Seatpost suspension
#1
Junior Member
Thread Starter
Join Date: May 2020
Posts: 20
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 8 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
Seatpost suspension
Just started riding my 82 Fuji America after refurbishing it. I was riding a hybrid before that. The road bike is not as forgiving as the hybrid on bumps in the road. Anyone have any experience with one of these? Or are they just a gimmick?
#2
Senior Member
Join Date: Jun 2006
Posts: 20,305
Mentioned: 130 Post(s)
Tagged: 0 Thread(s)
Quoted: 3464 Post(s)
Liked 2,829 Times
in
1,995 Posts
Will flex up and down but I bet by design side to side!
#3
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,515
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2747 Post(s)
Liked 3,398 Times
in
2,057 Posts
#4
Senior Member
My take... I have a suspension post on my hybrid, used it, liked it and had no problems. I tried one on my gravel bike (not the style you are looking at). Hated it. No matter how I adjusted it, it would bounce on flat road with any type or decent power being put down. This was very undesirable. I had it cranked to maximum pressure and mimimal movement but the down side was now it was so hard it was useless for its intended purpose. After one ride of 40 miles my knees were hurting and I took it off. The knees could have been a height issue but I went through great length to make sure the overall height was the same as my previous setup. Either way, wasn't worth my time messing with it. My son put it on his road bike and loves it but he putts around slow speed cruising similar to what a lot of people do on a hybrid. I guess it depends on you and what you are doing on the bike.
Last edited by u235; 08-09-20 at 09:15 AM.
#5
Senior Member
Join Date: Jun 2010
Location: Medford MA
Posts: 2,089
Bikes: Ron Cooper touring, 1959 Jack Taylor 650b ladyback touring tandem, Vitus 979, Joe Bell painted Claud Butler Dalesman, Colin Laing curved tube tandem, heavily-Dilberted 1982 Trek 6xx, René Herse tandem
Mentioned: 80 Post(s)
Tagged: 0 Thread(s)
Quoted: 964 Post(s)
Liked 1,451 Times
in
723 Posts
Just wow.
If I were the OP, I'd go with softer, wider tires. Gravelking slick if you have 700c, Pasela if you have 27", and the biggest you can fit in your frame.
I was messing with sprung saddles a while back, and my observation was that as the saddle springs compressed, the saddle tilted nose-up. This encourages the rider to slide rearward, compressing the springs even more. Conversely, as the rider slides forward, the springs decompress, tilting the saddle nose-down and causing the rider to slip forward even further. This thing seems like it would do the same thing, but maybe even worse.
__________________
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.
Owner & co-founder, Cycles René Hubris. Unfortunately attaching questionable braze-ons to perfectly good frames since about 2015. With style.