2012 Trek Fuel EX8 swingarm rear traingle swap on a Trek Remedy
#1
Newbie
Thread Starter
Join Date: Feb 2019
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
2012 Trek Fuel EX8 swingarm rear traingle swap on a Trek Remedy
I have a 2012 trek fuel ex 8 aluminum swing arm and rear traingle I found a 2012 Trek remedy 9.8 carbon frame with no triangle or swingarm I found a new 2012 Remedy trek on eBay with no swingarm or triangle I have a trek fuel 2012 is this swap possible the mesuments seem to be right and the parts are the same so it seems
#2
Senior Member
Join Date: Mar 2012
Location: Wales, UK
Posts: 148
Bikes: Saracen Skyline, Canyon Ultimate, Stanton Switchback, Cotic SolarisMAX
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
Quoted: 39 Post(s)
Likes: 0
Liked 1 Time
in
1 Post
How did you find the measurements - from a datasheet? Do they include the shock mounts as well as the pivot points? I would be surprised if you could actually find this info, so you won't really know until you try to bolt it all up. The Fuel is really a beefy XC bike, and the Remedy is more Enduro, so I would be concerned that the Fuel parts are not deaigned to take as much abuse as the Remedy (I have a Fuel - it is a great bike).
#3
Newbie
Thread Starter
Join Date: Feb 2019
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Likes: 0
Liked 0 Times
in
0 Posts
There is a guy on eBay with like 4 different trek frames I just got the mounting measurements from the seller they are all brand new frames never been rode the measurements are 7” from the two bolts that bolt on the frame one by the crank and the other on the rear triangle he had a fuel 9.9 a slasher and one other they are 150$ all the resurch I have done tells me it should work but I don’t know my bike is a fuel ex 8 2012 and all the frames he has are 2012 trek new frames my next step was to contact trek