Steel fork repair
#1
Garage tetris expert
Thread Starter
Join Date: May 2016
Location: Texas Hill Country
Posts: 887
Bikes: A few. Ok, a lot
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 385 Post(s)
Liked 690 Times
in
327 Posts
Steel fork repair
Greetings:
I have a Miyata splined triple-butted steel fork that needs repair. Shipper packed the bike poorly and now it appears one fork blade is slightly bent. My crude measurements show drive side blade is bent about 10mm forward and 6mm outward. This assumes the other blade is good. I want to have it repaired by a seasoned veteran.
My questions are:
(1) Is it a reasonable idea to salvage this fork? The fork/bike is virtually new from 30yrs ago.
(2) How much would something like this cost when done by a professional?
(3) Can anyone recommend a shop in central Texas? (Not interested in big box bike chains)
Thanks in advance!
I have a Miyata splined triple-butted steel fork that needs repair. Shipper packed the bike poorly and now it appears one fork blade is slightly bent. My crude measurements show drive side blade is bent about 10mm forward and 6mm outward. This assumes the other blade is good. I want to have it repaired by a seasoned veteran.
My questions are:
(1) Is it a reasonable idea to salvage this fork? The fork/bike is virtually new from 30yrs ago.
(2) How much would something like this cost when done by a professional?
(3) Can anyone recommend a shop in central Texas? (Not interested in big box bike chains)
Thanks in advance!
#2
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,385
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,686 Times
in
2,509 Posts
It's really hard for me to visualize what is wrong with that fork without a picture.
Unless it's a really weird bend, it can probably be bent back.
Unless it's a really weird bend, it can probably be bent back.
#3
Garage tetris expert
Thread Starter
Join Date: May 2016
Location: Texas Hill Country
Posts: 887
Bikes: A few. Ok, a lot
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 385 Post(s)
Liked 690 Times
in
327 Posts
Sorry, pics not yet available. I’ll try to explain “drive side blade is bent about 10mm forward and 6mm outward”. The drive side fork blade (right side from the perspective of the rider) is the one that seems to be affected. I’ve tried to measure the extent of the deflection at the dropouts.
The right-side dropout seems to be out of alignment with the left-side dropout by:
(a) 10mm forward— meaning the dropout is pushed forward away from the rider.
(b) 6mm outward— meaning the dropout is pushed to the right, away from the bike centerline, leading to a 106mm dropout spacing.
In order to fix it, and assuming the left-side blade is undamaged itself, then one would need to:
(a) bend the right fork blade toward the back of the bike by about 10mm (measured at dropout), and
(b) bend the right fork blade toward the centerline by about 6mm to make the dropout spacing 100mm again.
I can’t actually tell where along the fork-blade is bent. It might be gradual. The fork crown (visually) looks fine and straight with no cracks anywhere.
Does that paint a clearer picture?
The right-side dropout seems to be out of alignment with the left-side dropout by:
(a) 10mm forward— meaning the dropout is pushed forward away from the rider.
(b) 6mm outward— meaning the dropout is pushed to the right, away from the bike centerline, leading to a 106mm dropout spacing.
In order to fix it, and assuming the left-side blade is undamaged itself, then one would need to:
(a) bend the right fork blade toward the back of the bike by about 10mm (measured at dropout), and
(b) bend the right fork blade toward the centerline by about 6mm to make the dropout spacing 100mm again.
I can’t actually tell where along the fork-blade is bent. It might be gradual. The fork crown (visually) looks fine and straight with no cracks anywhere.
Does that paint a clearer picture?
#4
Garage tetris expert
Thread Starter
Join Date: May 2016
Location: Texas Hill Country
Posts: 887
Bikes: A few. Ok, a lot
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 385 Post(s)
Liked 690 Times
in
327 Posts
Also, this is a vintage steel touring fork with a bit of rake, so there is already a large bend in both blades
#5
Randomhead
Join Date: Aug 2008
Location: Happy Valley, Pennsylvania
Posts: 24,385
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4 Post(s)
Liked 3,686 Times
in
2,509 Posts
okay, that sounds fixable. You need to find an old-school shop with the Park fork alignment gauge (FT-4) and they might even be able to do this for you while you wait. We used to do it all the time when I was a mechanic back in the '70s.
Sorry I have no recommendations for shops. I can move this thread to C&V where you might get an answer to that question.
Sorry I have no recommendations for shops. I can move this thread to C&V where you might get an answer to that question.
#6
working on my sandal tan
Join Date: Aug 2011
Location: CID
Posts: 22,627
Bikes: 1991 Bianchi Eros, 1964 Armstrong, 1988 Diamondback Ascent, 1988 Bianchi Premio, 1987 Bianchi Sport SX, 1980s Raleigh mixte (hers), All-City Space Horse (hers)
Mentioned: 98 Post(s)
Tagged: 0 Thread(s)
Quoted: 3870 Post(s)
Liked 2,563 Times
in
1,577 Posts
"Texas Hill Country"... wonder if you're anywhere close to a shop that @Bandera would recommend.
#7
~>~
"Texas Hill Country"... wonder if you're anywhere close to a shop that @Bandera would recommend.
Helotes Bike Shop, Texas
Likes For Bandera:
#8
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,053
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4194 Post(s)
Liked 3,837 Times
in
2,295 Posts
Cost might run from $25 to $50 for typical (as in minor) fork alignment. No reason to not consider an alignment unless a hands on inspection suggests other. Don't assume that either drop out is correctly located, the datum is the steering axis. Andy
__________________
AndrewRStewart
AndrewRStewart
#9
Garage tetris expert
Thread Starter
Join Date: May 2016
Location: Texas Hill Country
Posts: 887
Bikes: A few. Ok, a lot
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 385 Post(s)
Liked 690 Times
in
327 Posts
Don't know if Hank is retired or not at Helotes Bicycle, haven't been over that way in awhile, but he's the Old School real deal.
Helotes Bike Shop, Texas
Helotes Bike Shop, Texas
#10
~>~
You are also in for a unique no bull-**** experience: Enjoy.
BTW: Hank is not the only Texas Culture Heritage site in Helotes.
Step right next door to John T. Floores Country store and have a beer or stay for the music, dancing, food and ambiance.
https://www.liveatfloores.com/about/
Last edited by Bandera; 05-14-19 at 10:46 AM.
#11
Garage tetris expert
Thread Starter
Join Date: May 2016
Location: Texas Hill Country
Posts: 887
Bikes: A few. Ok, a lot
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
Quoted: 385 Post(s)
Liked 690 Times
in
327 Posts
You are welcome.
You are also in for a unique no bull-**** experience: Enjoy.
BTW: Hank is not the only Texas Culture Heritage site in Helotes.
Step right next door to John T. Floores Country store and have a beer or stay for the music, dancing, food and ambiance.
https://www.liveatfloores.com/about/
You are also in for a unique no bull-**** experience: Enjoy.
BTW: Hank is not the only Texas Culture Heritage site in Helotes.
Step right next door to John T. Floores Country store and have a beer or stay for the music, dancing, food and ambiance.
https://www.liveatfloores.com/about/