Shimano Hub Removal Tool -Early?
#1
Senior Member
Thread Starter
Shimano Hub Removal Tool -Early?
I have a 80-81ish Motobecane Grand Record. It has Shimano components. What hub removal tool will work? I read about an "early" Shimano. Would this be considered "early"? It has 9 splines and is about 1 1/4" (32mm) across. I'll provide any other pertinent info that I can.
#2
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,515
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2747 Post(s)
Liked 3,394 Times
in
2,056 Posts
What model number is on the hub?
Likes For alcjphil:
#5
Senior Member
Join Date: Feb 2012
Location: Rochester, NY
Posts: 18,082
Bikes: Stewart S&S coupled sport tourer, Stewart Sunday light, Stewart Commuting, Stewart Touring, Co Motion Tandem, Stewart 3-Spd, Stewart Track, Fuji Finest, Mongoose Tomac ATB, GT Bravado ATB, JCP Folder, Stewart 650B ATB
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 4204 Post(s)
Liked 3,862 Times
in
2,310 Posts
Do you have a LBS open near you? If you're doing a one time freewheel removal and if the freewheel is the 333 version (whose tool is no longer available other then used , maybe on EBay) Then I question the value of buying it. If your LBS has the tool the job should cost only a few $ if you brought in only the wheel.
But I will be interested in what is really being asked about. Andy
But I will be interested in what is really being asked about. Andy
__________________
AndrewRStewart
AndrewRStewart
#6
Senior Member
Thread Starter
#8
Senior Member
Thread Starter
Well that's a "duh"! No, no new spokes. Thank you!!
EDIT: For that matter, maybe I'll be able to do one spoke at a time, to make it easier to keep track. But, I'm reading Sheldon Brown's article on wheel building, very helpful.
EDIT: For that matter, maybe I'll be able to do one spoke at a time, to make it easier to keep track. But, I'm reading Sheldon Brown's article on wheel building, very helpful.
Last edited by 408mopar; 07-02-20 at 10:12 AM.
#9
Banned
you need another identical rim then, if the spoke seat in the rim * is different diameter, you cannot re use same length of spokes.
* AKA ERD.. number..
* AKA ERD.. number..
#10
Really Old Senior Member
I'm still not sure what you are asking, but you have enough posts to post a picture which would be HELPFUL.
IF you are talking about a UniGlide FH, you need two chain whips.
IF you are talking about a UniGlide FH, you need two chain whips.
#11
SE Wis
Join Date: Apr 2005
Location: Milwaukee, WI
Posts: 10,515
Bikes: '68 Raleigh Sprite, '02 Raleigh C500, '84 Raleigh Gran Prix, '91 Trek 400, 2013 Novara Randonee, 1990 Trek 970
Mentioned: 40 Post(s)
Tagged: 0 Thread(s)
Quoted: 2747 Post(s)
Liked 3,394 Times
in
2,056 Posts
#13
Old fart
Join Date: Nov 2004
Location: Appleton WI
Posts: 24,786
Bikes: Several, mostly not name brands.
Mentioned: 153 Post(s)
Tagged: 0 Thread(s)
Quoted: 3588 Post(s)
Liked 3,400 Times
in
1,934 Posts
I have a 80-81ish Motobecane Grand Record. It has Shimano components. What hub removal tool will work? I read about an "early" Shimano. Would this be considered "early"? It has 9 splines and is about 1 1/4" (32mm) across. I'll provide any other pertinent info that I can.
#14
Senior Member
JohnThompson I was thinking the same thing. Some Moto's came with a Uniglide cassette hub body and a 5 or 6 speed cogset which was held on by the last (14T) sprocket. In which case the OP would need 2 chain tools to hold the cassette sprockets.